Samsung Plasma TV E550 User Manual
Have a look at the manual Samsung Plasma TV E550 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
the Connected pop-up. When it closes, you should see the device listed on the Wi-Fi Direct screen as connected. NIf you want to disconnect the device, select the connected Wi-Fi device, and then select Disconnect. Soft AP Menu → Network → Soft AP Using this function, you can connect the TV to your mobile devices if your
mobile devices do not support Wi-Fi Direct. The Soft AP screen lets you set the options for connecting Wi-Fi devices. ●Soft AP Turns Soft AP on or off. When Soft AP is set to On, your mobile devices can find the TV's network name in their Wi- Fi connection list. ●Security key Enter a Security key at least 9
characters long using the remote control. Select Done when finished. – If the security key is not at least 9 characters long, Done is not available. – To connect a mobile device to the TV, you must input the security key into the device. – If the network does not operate correctly, check the security key again. An incorrect security key may
cause a malfunction. AllShare Settings Menu → Network → AllShare Settings AllShare Play lets you play Videos, Photos, or Music located on your PC or your DLNA compatible device on the TV using a network connection. It also lets you control the TV through these devices. The AllShare Settings screen lists your network connected AllShare devices
and their IP addresses. Through this screen, you can allow a device to access the TV, deny access, or delete the device from the AllShare list. The AllShare Settings screen only displays devices if you have established networked connections to AllShare devices. Otherwise, it will be empty. To use the AllShare network function, you must install the AllShare network software on your PC. For details on set
up options, refer to "Using the DLNA Function". Device Name Menu → Network → Device Name Enter a name for this TV. This name will be shown on network remote controls and devices using AllShare Play. NA keyboard appears on the screen. Key in a name for your TV using your remote control. When finished, select Done.
NTo enter letters, highlight and select each letter. To enter numbers, highlight and select each number or press the number buttons on your remote. NTo shift to capital letters (or from capital letters to lower case), select the Caps or Shift button. NTo display symbols and punctuation, select 1 . To redisplay letters, select 1 again.
Setting the TimeTime Menu → System → Time NThe time you set will appear when you press the INFO button. ●Clock Set the clock to use the various timer features of the TV. NIf you disconnect the power cord, you have to set the clock again. To set the clock, follow these steps:
1. Go to Clock screen ( System → Time → Clock ). 2. Select Auto or Manual. Œ If you selected Auto: The TV will automatically download the correct time from a digital channel. – Select Time Zone, and then select your Time Zone. – Select DST (Daylight Savings Time). Select On if you want to
turn the DST adjustment on and off manually. Select Off to turn off the DST adjustment. NDST and Time Zone function are only available when the Clock Mode is set to Auto . ΠIf you selected Manual: РThe Clock Set screen appears. Set the Date and Time manually. You can set the current date and time using your remote.