Samsung Plasma TV E550 User Manual

Anynet+ (HDMI-CEC) (Troubleshooting)
Anynet+ does not work. Check if the device is an Anynet+ 
device. The Anynet+ system supports 
Anynet+ devices only.
You can connect only one receiver 
(home theater).
Check if the Anynet+ device power 
cord is properly connected.
Check the Anynet+ device’s Video/
Audio/HDMI cable connections. 

Check whether Anynet+ (HDMI-CEC) is 
set to On in the Anynet+ setup menu.
Check whether the TV remote control is 
in TV mode.
Check whether the remote control is 
Anynet+ compatible.
Anynet+ doesn’t work in certain 
situations. (Searching channels, 
operating Smart Hub  or Setup, etc.)
If you have removed and then 
reconnected the HDMI cable, please  

make sure to search devices again or 
turn your TV off and on again.
I want to start Anynet+. Check if the Anynet+ device is properly 
connected to the TV and check if the 
Anynet+ (HDMI-CEC)  is set to On. 
(System  
→  Anynet+ (HDMI-CEC)
)
Open the Tools menu using your 
remote and then select  Anynet+ (HDMI-
CEC) . Then select a menu you want.
I want to exit Anynet+. 

Select View TV in the Anynet+ menu.
Go to the Source screen using your 
remote and select a non-Anynet+ 
device.
The message  Connecting to Anynet+ device 
...  appears on the screen.
You cannot use the remote control 
when you are configuring Anynet+ or 
switching to a view mode.
Use the remote control after the TV has 
completed Anynet+ configuration or  

has finished switching to Anynet+.
The Anynet+ device does not play. You cannot use the play function when 
Setup is in progress.
The connected device is not displayed. Check whether or not the device 
supports Anynet+ functions.
Check whether or not the HDMI cable is 
properly connected.
Check whether Anynet+ (HDMI-CEC)  is 
set to On. ( System 
→  Anynet+ (HDMI- 

CEC))
Search Anynet+ devices again.
Anynet+ requires an HDMI connection. 
Make sure the device is connected to 
your TV with an HDMI cable.
Some HDMI cables may not support 
Anynet+ functions.
If the connection is terminated because 
there has been a power failure or the 
HDMI cable has been disconnected, 
please repeat the device scan. 

The TV sound is not output through the 
receiver.Connect the optical cable between TV 
and the receiver.
 for LED 6100 ―  7150 Series and PDP TV   The 
ARC function enables digital output of 
sound using the  HDMI IN 2(ARC) port 
and can only be operated when the TV 
is connected to an audio receiver that 
supports the ARC function. 

AllShare Play (Troubleshooting)
This file may not be playable properly. This may appear because of the 
high bit rate of the content. Content 
generally will play but could experience 
some playability issue. 

Smart Hub (Troubleshooting)
Some application contents only appear in 
English. How can I change the language? The Application content language may 
be different from the application user 
interface language.
The ability to change the language 
depends on the service provider.
Some application services do not work. Check with the service provider.
Refer to the help website for application  

service provider information.
When a network error occurs, I can only use 
the Settings menu. If network connection doesn’t work, 
your service might be limited, as all 
functions except the Settings menu 
need to connect to the Internet.