Samsung Plasma TV E550 User Manual

phone will be displayed on your 
TV. The contents are played 
automatically 3 seconds after the 
alarm window appears.  
– If you close the alarm window 
using your remote when the 
alarm window appears, the media 
contents are not played.
 
NThe first time a device accesses your 
TV through the media function, a 
warning pop up window appears.  

Select Allow. This permits the phone 
to access the TV freely and use the 
Media  function to play content.
 
NTo turn off media contents 
transmissions from a mobile phone, 
set the device to  Denied in the 
AllShare Settings.
 
NContents may not play on your TV 
depending on their resolution and 
format.
 
NSome buttons may not work  

depending on the type of media 
content.
 
NUsing the mobile device, you can 
control the media play. For details, 
refer to each device’s user’s guide. 

Anynet+ (HDMI-CEC)
Menu  → System
 
→  Anynet+ (HDMI-CEC)
Anynet+ is a function that enables 
you to control all connected Samsung 
devices that support Anynet+ with your 
Samsung TV’s remote. The Anynet+ 
system can be used only with Samsung 
devices that have the Anynet+ feature. 
To be sure your Samsung device 
has this feature, check if there is an 
Anynet+ logo on it. 

 
NYou can only control Anynet+ 
devices using the TV’s remote 
control, not the buttons on the TV.
 
NThe TV remote control may not work 
under certain conditions. If this 
occurs, reselect the Anynet+ device.
 
NThe Anynet+ functions do not 
operate with other manufacturers’ 
products.
 
NFor instructions explaining how to 
connect Anynet+ external devices,  

refer to the device’s user manual. 
You must connect an Anynet+ device 
using an HDMI cable. Some HDMI 
cables may not support Anynet+ 
functions.
 
NAnynet+ works when the AV device 
supporting Anynet+ is in the standby 
or on status.
 
NAnynet+ supports up to 12 AV 
devices in total. Note that you can 
connect up to 3 devices of the same  

type.
 
NHowever, you can connect only one 
Anynet+ Home Theater. To connect 
an Anynet+ Home Theater, connect 
the Home Theater to the TV using an 
HDMI cable then:
 
– To hear sound from the Home 
Theater’s front, left and right 
speakers and the subwoofer only, 
connect a digital optical cable 
between the 
DIGITAL AUDIO OUT  

(OPTICAL) port on your TV and the 
Digital Audio Input on the Home 
Theater.
 
– To hear 5.1 channel audio, connect 
HDMI cables to your Anynet+ DVD 
player, satellite box, etc. Then, 
connect the DIGITAL AUDIO OUT 
(OPTICAL) port on your DVD 
player, Satellite Box, etc. (i.e. 
Anynet+ Device 1 or 2) directly to 
the Home Theater, not the TV. 

Anynet+ (HDMI-CEC) Menu
The Anynet+ menu changes depending 
on the type and status of the Anynet+ 
devices connected to the TV.
 
●View TV
Change from Anynet+ mode to TV 
broadcast mode.
 
●Device List
Shows the Anynet+ device list.
 
●(device_name)  Menu
Shows the menu of the connected  

device. E.g. if a DVD player is 
connected, the disc menu of the DVD 
player will appear.
 
●(device_name)  Tools
Shows the Tools menu of the 
connected device. E.g. if a DVD 
player is connected, the Tools menu 
of the DVD player will appear.
 
NDepending on the device, this 
menu may not be available.
 
●(device_name)  Title Menu