Samsung Plasma SPN4235 Specifications

81
80
Setting the TimersThis PDP can be set to turn on or off automatically at specific times that you choose. Before
using the timers, you must set the PDP’s clock, as described previously.
6 
Press the LEFT or RIGHT button to select “Off” or 
“On”, then press the UP or DOWN button to select 
“Off” or “On”.
7
If you want to set Off Time, press the UP or DOWN
button to select the “Off Time”.
Set the “Off Time” just as you set “On Time”.
8 
Press the MENU button to exit.
Note• If you set to On Time or Off...

Selecting a Menu Language .....................................................84
Viewing Closed Captions .........................................................85
Digital Noise Reduction ...........................................................86
Setting Auto Power Off  ...........................................................87
Using the V-Chip .....................................................................88
Selecting the Film Mode...

Selecting a Menu Language
85 84
1
Press the MENU button. Press the UP or DOWN
button to select “Function”, then press the ENTER 
button. 
2 
Press the UP or DOWN button to select “Caption”,
then press the ENTER button.
3
Press the LEFT or RIGHT button to turn closed cap-
tioning On/Off.
4
Press the UP or DOWN button to select “Mode”,
then press the LEFT or RIGHT button to select 
“Caption” or “Text.”  
5
Depending on the particular broadcast, it might be
necessary to make changes to “Channels” and...

1
Press the MENU button. Press the UP or DOWN
button to select “Function”, then press the ENTER 
button. 
2 
Press the UP or DOWN button to select “Auto
Power Off”.
3
Press the LEFT or RIGHT button to select “On”.
4 
Press the MENU button to exit.
Note• If the Off timer is set, Auto Power Off will not function.
• The power will be turned off automatically after 15 minutes if the PDP is ON and there is no input
signal. (For instance, if you select a channel without a signal while in TV mode or when there...

89
88
Using the V-ChipThe V-Chip feature automatically locks out programs that are deemed inappropriate 
for children. The user must enter a PIN (personal ID number) before any of the V-Chip
restrictions are set up or changed.
Note : When the V-chip feature is activated, the PIP and auto channel program features
do not function.
Setting Up Your Personal ID Number (PIN)1
Press the MENU button. Press the UP or DOWN
button to select “Function”, then press the ENTER 
button. 
2 
Press the UP or DOWN button...

91
90
How to Set up Restrictions Using the “TV guidelines”First, set up a personal identification number (PIN), and enable the V-Chip. (See previous section.)  
Parental restrictions can be set up using either of two methods: The TV guidelines or the MPAA rating.1
Press the MENU button. Press the UP or DOWN
button to select “Function”, then press the ENTER 
button. 
2 
Press the UP or DOWN button to select “V-Chip”,
then press the ENTER button.
3 
The message Enter Pin will appear. Enter your 
4-digit...

93
92
How to Set up Restrictions using the MPAA Ratings: G, PG, PG-13, R, NC-17, XThe MPAA rating system uses the Motion Picture Association of America (MPAA) system, and its main application is
for movies. When the V-Chip lock is on, the TV will automatically block any programs that are coded with objection-
able ratings (either MPAA or TV-Ratings).1
Press the MENU button. Press the UP or DOWN
button to select “Function”, then press the ENTER 
button. 
2 
Press the UP or DOWN button to select “V-Chip”,...

94
PLASMA DISPLAY PANEL
Appendix
Troubleshooting............................................................................96
Care and Maintenance ................................................................97
Specifications ..............................................................................98
Selecting the Film Mode
1 
Press the MENU button. Press the UP or DOWN
button to select “Function”, then press the ENTER 
button. 
2 
Press the DOWN button to select Film Mode, then  
press the...

97
96
Troubleshooting
Problem
Poor picture.
Your Remote control does not
operate the PDP.
The PDP won’t turn on.
There is no screen image.
The image is too light or 
too dark. 
The image is too large or 
too small.Before you call a service technician, please scan this list of problems and possible solutions. It may save you
time and money.
Possible Solution
Check all wire connections.
Press the “Mode” button to put your remote control in the “TV”
mode.
Check if the power plug is connected. 
Check to see...

99
98
Memo
Specifications
SPN4235
1027 (W) X 79 (D) X 630.5 (H) mm ; 40.43 (W) X 3.11 (D) X 24.82(H) inches
58 (W) X 21 (D) X 210 (H) mm ; 2.28 (W) X 0.83 (D) X 8.27 (H) inches
31 kg ; 68.34 lbs {37.6 kg ; 82.89 lbs (with stand)}
134g ; 0.295 lbs (including batteries) 
120V~, 60Hz 
370 Watts
852(H) x 480(V) 
107 Cm/42 inches 
VHF, UHF (75Ωunbalanced)
VIDEO
S-VIDEO
COMPONENT 1 - 480i / 480p / 720p / 1080i
COMPONENT 2 - 480i / 480p / 720p / 1080i
RGB : D-SUB 15P
DVI
VIDEO / S-VIDEO
COMPONENT 1
COMPONENT 2...