Samsung Plasma SPN4235 Specifications

PLASMA DISPLAY PANEL
Channel Control
Fine Tuning Channels....................................................................62
LNA (Low Noise Amplifier) ............................................................63 

63
Fine Tuning ChannelsUse fine tuning to manually adjust a particular channel for optimal reception.
62
1
Press the MENU button. Press the UP or DOWN
button to select “Channel”, then press the ENTER 
button.
2 
Press the UP or DOWN button to select “Fine
Tune”.
3 
Press the LEFT or RIGHT button to adjust the fine 
tuning.
4
To store the fine tuning setting in the TV’s memory,
press the UP button.(A star iconwill appear.)
To reset the fine tuning to “0”, press the DOWN 
button.
5 
Press the MENU button...

PLASMA DISPLAY PANEL
Connecting a PC and Operation
Connecting to a PC ......................................................................66
Adjusting the PC Screen................................................................70
Changing the Position of the Image ................................................71
Changing the Size of the Image ....................................................72
Information ..................................................................................73
Picture...

67
Connecting to a PCConnection to a Macintosh computer may require in adapter.
66
Connect a PC (15pin) cable between the PC Output jack (or DVI jack) on the PC and the
RGB IN(or DVI IN) Input jack (15p D-SUB) on the PDP.  
Connect a Audio cable between the Audio (RGB or DVI) on the PC and the Audio L/R (RGB
or DVI) input jacks on the PDP.  To watch the PC screen:1. Turn on your PDP, and press the TV/VIDEO button on the remote control.
2. Press the UP or DOWN button to select “PC”, then press the ENTER...

69
68
How to Set up Your PC Software (Windows only)The Windows display-settings for a typical computer are shown below. However, the actual screens
on your PC will probably be different, depending upon your particular version of Windows and your
particular video card. But even if your actual screens look different, the same, basic set-up information
will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
On the windows screen, select in the following
sequence :...

71
Adjusting the PC Screen
70
Adjusting the R.G.BPreset: •Press the TV/VIDEO button, then press the UP or DOWN button to select PC. 
Press the ENTER button to select PC mode. 1 
Press the MENU button, then press the ENTER 
button.
2 
Press the UP or DOWN button to select “Color
Tone”, then Press the LEFT or RIGHT button to select
“Custom”. When “Custom” is selected, the word 
“Color Adjust” will appear on the screen.
3 
Press the UP or DOWN button to select “Color
Adjust”, then press the ENTER button.
4...

73
Changing the Size of the Image
72
Preset: •Press the TV/VIDEO button, then press the UP or DOWN button to select PC. 
Press the ENTER button to select PC mode. 1 
Press the MENU button. Press the UP or DOWN
button to select “PC”, then press the ENTER button. 
2 
Press the UP or DOWN button to select “Scaling”.
3 
Press the LEFT or RIGHT button to select “Wide” 
or “Normal”. 
4 
Press the MENU button to exit.
PC
Position
Adjust
Scaling
Information
Auto Adjust
Move               Enter...

75
Coarse AdjustmentPreset: •Press the TV/VIDEO button, then press the UP or DOWN button to select PC. 
Press the ENTER button to select PC mode. 1 
Press the MENU button. Press the UP or DOWN
button to select “PC”, then press the ENTER button. 
2 
Press the UP or DOWN button to select “Adjust”,
then press the ENTER button.
3 
Press the UP or DOWN button to select “Coarse”.
Remove picture noise (vertical stripes) on the screen 
by pressing the LEFT or RIGHT button. (If Coarse is 
not set properly,...

76
PLASMA DISPLAY PANEL
Time Setting
Setting the Clock .......................................................................78
Setting the Sleep Timer ...............................................................79
Setting the Timers ......................................................................80
Setting the Preferred Channel and Volume Level ............................82
Fine Tuning (Fine)Preset: • Press the TV/VIDEO button, then press the UP or DOWN button to select PC. 
Press the ENTER...

79
78
Setting the Clock
You can set your PDP to automatically turn off after a preset interval.1
Press the MENU button. Press the UP or DOWN
button to select “Function”, then press the ENTER 
button. 
2 
Press the UP or DOWN button to select “Time”, then
press the ENTER button.
3 
Press the UP or DOWN button to select “Sleep”.
4
Press the LEFT or RIGHT button to select the time
interval for the PDP to stay on. The interval ranges 
from 10 to 180 minutes.
5 
Press the MENU button to exit.
Setting the...