Samsung Plasma SPN4235 Specifications

21
Connecting VHF and UHF Antennas
Connecting Cable TVYou can connect different cable systems to your PDP, including cable without a cable box, 
and cable with a cable box that descrambles some or all channels.
20
Antennas with 75-ohm Round LeadsIf your antenna looks like this:  it has 75-ohm round leads.  1
Plug the antenna lead into the VHF/UHF terminal 
on the PDP.
Use the Antenna Cable, an accessory included 
in the product package. 
Cable without a Cable Box1 
Plug the incoming cable into the...

2223
Connecting SpeakersExternal speakers are sold seperately. Check with your dealer.
Connect the speaker audio cable to the external speaker output jack on the PDP matching the
“+” and “-” ends of the cable with the diagram on the PDP. How to ConnectConnecting PDP and Speakers  Fix the bracket onto the guide pole located on the rear of speaker and fasten the screws.
After removing the three screws on the PDP, clamp the speaker and the PDP together and
fasten the screws.1
2
Speaker Audio Cable
✱External...

25
Connecting a Camcorder
24
Connecting a VCR to the Video or S-Video/Audio jack
S-Video Cable
Audio Cable
Video Cable
Power Plug
Connect the Video/Audio cables between the AUDIO(L/R)/VIDEO jacks on the PDP and
AUDIO/VIDEO OUT jacks on the VCR. 
(Note: For better video, you can use an S-Video cable.)
Videotape Playback:1. Turn on your PDP, and press the TV/VIDEO button on the remote control.
2. Press the UP or DOWN button to select “Video” or “S-Video”, then press the ENTER button.
3. Turn on your VCR,...

27
Connecting a DVD Player 
(480i, 480p)
This PDP displays the optimum picture in 720p mode.
26
Playing DVD
Audio Cable
Video Cable
Power Plug
Connect a Video Cable between the Y, Pb, Pr (COMPONENT1, 2) input jacks on the PDP
and Y/P
B/PRoutput jacks on the DVD players.
Connect a Audio Cable between the AUDIO L/R(COMPONENT1, 2) input jacks on the PDP
and the AUDIO OUT jacks on the DVD player.
To Play DVD:1. Turn on your PDP, and press the TV/VIDEO button on the remote control.
2. Press the UP or DOWN...

PLASMA DISPLAY PANEL
Operation
Turning the PDP On and Off ..........................................................30
Memorizing the Channels..............................................................32
Setting Up Your Remote Control ....................................................37 

Turning the PDP On and Off
3031
Turning the PDP On and OffPress the Power button on the remote control.
The PDP will be turned on and you will be ready to use it’s 
features.
You can also use the POWER( ) button on the front of the 
PDP.Notes: • If your PDP isn’t turned on when the power button is
pressed: Press the 
MODE
button to check if the TV mode
has been chosen ( ). 
Viewing the Menus and DisplaysYour PDP has a simple, easy-to-use menu system that appears on the PDP screen. This system makes it...

Memorizing the ChannelsYour PDP can memorize and store all of the available channels for both “off-air” (antenna)
and cable channels. After the available channels are memorized, use the CH  and CH 
buttons to scan through the channels. This eliminates the need to change channels by entering
the channel digits. There are three steps for memorizing channels: selecting a broadcast
source, memorizing the channels (automatic) and adding and deleting channels (manual).
3233
Selecting the Video...

To View Memorized Channel (PIP Mode)1
Press the MENU button. Press the UP or DOWN
button to select “Channel”, then press the ENTER 
button.
2
Press the UP or DOWN button to select “Ch Scan”,
then press the ENTER button.
Only the memorized channels are chosen.  
Press the RIGHT button to stop.
3435
Adding and Erasing Channels (Manual Method)1 
Use the number buttons to directly select the channel that
will be added or erased.
Ex) Channel “4”
2 
Press the ADD/DEL button: 
Repeatedly pressing this button...

3637
Setting Up Your Remote Control
This PDPs remote control can operate almost any VCR, cable box or DVD. After it has been set up
properly, your remote control can operate in four different modes :TV, VCR, Cable or DVD. 
Pressing the corresponding button on the remote control allows you to switch between these modes,
and control whichever piece of equipment you choose.
Note :
The remote control may not be compatible with all DVD Players, VCRs, Cable boxes.   The remote control can operate only on STB...

38
PLASMA DISPLAY PANEL
Picture Control
Customizing the Picture ................................................................40
Using Automatic Picture Settings ....................................................41
Selecting the Color Tone ................................................................42
DNIe (Digital Natural Image engine)  ............................................43
Viewing the Picture-in-Picture ..........................................................44
Changing the Screen...