Samsung Plasma HDTV PN60E8000 User Manual

SMART Interaction
 for LED 7500 series and above, PDP 8000 series 
Using this function, you can access and 
control menu options and functions 
using speech, motions or face 
recognition.
INFORMATION BOOKLET DISCLAIMER
 
●Face recognition Log-in
In order for Face recognition to 
function, a thumbnail image of your 
face will be stored in your TV for  

logging-in purposes.
Logging into the Smart Hub using Face 
recognition does not provide as high a 
level of security as logging in with an 
ID and password.
 
●TV Camera Usage
Before using the TV Camera, you 
should be aware that under some 
circumstances and under certain legal 
conditions your use/misuse of the TV  

Camera can result in legal liability for 
you. By using the TV Camera, you agree 
that you will not use the camera (i) in 
locations where cameras are generally 
prohibited (such as bathrooms, locker 
rooms or changing rooms), (ii) in any 
manner that will result in an invasion 
of a person’s privacy or (iii) in violation 
of any applicable laws, regulations or 
statutes.
When you use a TV camera, you should  

check whether a tape attached or not 
in rear of the TV camera, and then you 
can use a TV camera after adjust a 
camera angle. When you don't want to 
use a TV camera, we recommend to use 
after a camera lens fixes to upwards. In 
this case, Face recognition and Motion 
Control are not available.
Voice Control
Menu  → System
 
→  Voice and Motion 
Control  → Voice Control 

Enable or disable the voice recognition 
function. Lets you access and control 
menu options and functions using 
speech.
 
NFor accurate voice recognition, refer 
to the Standard Voice Command 
list at the Samsung web site (www.
samsung.com → support → Manuals 
& Downloads).
 
NVoice Control function can be 
affected recognition by unclear  

pronunciation, voice level, or 
surrounding noise.
 
NTo use Voice Control, you must 
pronounce words and phrases clearly 
and correctly in the language you 
selected in Language.
 
NAmbient noise may cause Voice 
Control to malfunction. (Appropriate 
surrounding noise: Below 40dB)
Your TV can "hear" your voice 
commands in two ways: 

 
– Using the TV’s microphone. (Distant 
Recognition)
 
NWe are recommended using  Voice 
Control function within about 13 
ft with your TV. You can check 
the usable distance by using Voice 
Control Environment Test  (System  
→ Voice and Motion Control → 
Voice Control →  Voice Control 
Environment Test ).
 
– Using the VOICE
˜ button on  

your remote. (Close Proximity 
Recognition)
 
NWhen you use the TV's microphone, 
the words may not be recognized 
because of ambient noise. If this 
occurs, try using the VOICE ˜ button 
on your remote. The TV will be able 
to recognize a voice command more 
easily.
 
NThe VOICE ˜ button on your remote 
is always activated. If you want to  

use the TV's microphone, turn on 
Voice Control (System 
→  Voice and 
Motion Control  → Voice Control).
 
NSay a voice command to proper 
volume into the microphone of your 
remote within 0.3 ― 0.4 feet. If voice 
level is too small or large, voice 
command may not be recognized.
 
NIf a menu option or function is not 
supported by the Voice Control 
function, we suggest trying the  

Motion Control function. To use the 
Motion Control, raise your hand while 
opening it toward the screen, hold it 
for a moment and then wave it 3~4 
time to the left and right. Motion 
Control starts. If the Motion Control 
starts, the cursor is displayed at the 
center of the screen and the Motion 
Guide Bar Size  is at the bottom of 
the screen.
 
●Voice Control