Samsung Plasma E7000 User Manual
Have a look at the manual Samsung Plasma E7000 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Anynet+ (HDMI-CEC) Menu The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV. ●View TV Changes Anynet+ mode to TV broadcast mode. ●Device List Shows the Anynet+ device list. ●(device_name) Menu Shows the menu of the connected
device menus. E.g. if a DVD player is connected, the disc menu of the DVD player will appear. ●(device_name) Tools Shows the tools menu of the connected device. E.g. if a DVD player is connected, the tools menu of the DVD player will appear. NDepending on the device, this menu may not be available. ●(device_name) Title Menu
Shows the title menu of the disc in the connected device. E.g. If a DVD player is connected, the title menu of the movie in the DVD player will appear. NDepending on the device, this menu may not be available. ●Receiver Sound is played through the receiver. Setting up Anynet+ (HDMI-CEC) ●Anynet+ (HDMI-CEC)
To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On. NWhen the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated ●Auto Turn Off Set an Anynet+ Device to turn off automatically when the TV is turned o f f. NIf the Auto Turn Off is set to Ye s , running external devices will turn off
at the same time as the TV powers o f f. NMay not be enabled depending on the device. ●Receiver You can listen to sound through a receiver (i.e. Home Theater) instead of the TV Speaker. Switching between Anynet+ Devices 1. Open the Tools menu using your remote, and then select Anynet+
(HDMI-CEC). 2. Select Device List. The Device List screen appears. NIf you cannot find a device you want, select Refresh to refresh the list. 3. Select a device, and then wait until switch to the selected device. NThe Device List menu appears only when you set Anynet+ (HDMI-CEC) to On in the System
menu. NSwitching to the selected device may take up to 2 minutes. You cannot cancel the switching operation while switching is in progress. NIf you have selected an Anynet+ device using Source function and then selecting its input source, you cannot use the Anynet+ function. Make sure to switch to
an Anynet+ device by using the Device List. Listening through a Receiver You can listen to sound through a receiver (i.e. Home Theater) instead of the TV Speaker. To listen to sound through a receiver, go to Receiver screen ( System → Anynet+ (HDMI- CEC) → Receiver ). Then select Receiver and set to On. NIf your receiver supports audio only,
it may not appear in the device list. NThe receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO OUT (OPTICAL) port of the TV. NWhen the receiver (i.e. Home Theater) is set to On, you can hear sound output from the TV’s Optical jack. When the TV is displaying a DTV (air) signal, the TV will send out 5.1 channel sound to the receiver. When
the source is a digital component such as a DVD player and it is connected to the TV via HDMI, you will hear only 2 channel sound from the receiver. Using the ARC function You can listen to sound through a receiver connected using an HDMI cable without connecting a separate optical cable. To listen to sound through a receiver using the ARC function, go to