Samsung Plasma E7000 User Manual
Have a look at the manual Samsung Plasma E7000 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Antenna function also determines the signal source the TV is tuned to. For example, if you receive your TV signal over the air, and you select Cable, you will see only snow. You must select Air to see a picture. Auto Program Menu → Channel → Auto Program The Auto Program function memorizes all channels that are available over the air or through your cable system and
adds them to the Channel list. To start the Auto Program, follow these steps:1. Go to the Auto Program menu. 2. Select Air or Cable or both, and then select Next. A c mark appears in the check box. NIf you selected Air or Cable in the Antenna menu, your choice will already be selected. 3. If you selected the Cable, the cable
system screen appears. Select the Digital Cable System. NIf you selected the Air only, the Auto Program starts. 4. Select the correct cable signal format - STD, HRC or IRC. NMost cable systems use STD (Standard). 5. Repeat for Analog Cable System . 6. Select Next. The Auto Program starts.
NAfter all the available channels are stored, the Auto Program removes scrambled channels. When done, the Auto Program menu then reappears. This process can take up to 30 minutes.
Other FeaturesClear Scrambled Channel Menu → Channel → Clear Scrambled Channel This function filters out scrambled channels after the Auto Program is completed. This process may take up to 30 minutes. NThis function is only available in Cable mode. How to Stop the Clear Scrambled Channel
function1. To stop the Clear Scrambled Channel function, select Stop. 2. The message Stop searching for scrambled channels? appears. Select Ye s . 3. The Clear Scrambled Channel function will be stopped. Fine Tune Menu → Channel → Fine Tune (analog channels only)
If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, fine tune the channel manually. Scroll to the left or right until the image is clear. NSelect the channel, and then select Fine Tune. NFine tuned channels that have been saved are marked with an asterisk “*”
on the right-hand side of the channel number in the channel banner. NTo reset fine-tuning, select the channel, select Fine Tune, and then select Reset on the Fine Tune screen. Crosstalk Noise Reduction Menu → Channel → Crosstalk Noise Reduction (analog channels only) This function reduce diagonal noise in picture caused by the crosstalk of
signals. If your TV displays with a noise while watching TV, turns on this function.
Changing the Preset Picture ModePicture Mode Menu → Picture → Picture Mode Picture modes apply preset adjustments to the picture. NWhen your TV is connected to a PC via the HDMI to DVI cable, you can only select Entertain and Standard . ●Dynamic Brightens the screen. Suitable for a bright room. Basic Feature