Samsung Plasma E7000 User Manual
Have a look at the manual Samsung Plasma E7000 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Samsung recommends using IEEE 802.11n. When you play video over a network connection, the video may not play smoothly. NTo use a wireless network, your TV must be connected to a wireless IP sharer (either a router or a modem). If the wireless IP sharer supports DHCP, your TV can use a DHCP or static IP address to connect to the wireless network.
NSelect a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer is currently being used by another device nearby, this will result in interference and communication failure. NYour TV supports only the following wireless network security protocols: – Authentication Mode : WEP, WPAPSK, WPA2PSK
– Encryption Type : WEP, TKIP, AES NIf you select the Pure High- throughput (Greenfield) 802.11n mode and the Encryption type is set to WEP, TKIP or TKIP AES (WPS2Mixed) on your AP or wireless router, Samsung TVs will not support a connection in compliance with new Wi-Fi certification specifications. NIf your wireless router supports WPS (Wi-Fi Protected Setup), you
can connect to the network via PBC (Push Button Configuration) or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in either mode. NIf your router, modem, or device is not certified, it may not connect to the TV. NConnection Methods: You can set up the wireless network connection in four ways:
– Auto Setup (Using the Auto Network Search function) – Manual Setup – WPS(PBC) – Plug & Access
Setting up the Wired Network Network Settings Menu → Network → Network Settings Set the wired or wireless network connection to use various Internet services such as Smart Hub, AllShare Play and perform software upgrades. Automatic Wired Network Setup You can configure your TV's wired network connection automatically when connecting your TV to a network that
supports DHCP. NWhen connecting LAN cable, the screen pop-up appears directly to set wired network. To set up your TV’s wired network connection automatically, follow these steps: 1. Go to the Network Settings screen. (Network → Network Settings) 2. Select Start. The network test screen appears and verifies the network
connection. 3. When the connection has been verified, the You are connected to the Internet. If you have any problems using online services, please contact your Internet Service Provider. message appears. NIf the connection process fails, check the LAN port connection. NIf the automatic process cannot find the network connection values or
if you want to set the connection manually, go to the next section, "Manual Network Setup." Manual Wired Network Setup You can configure your TV's wired network connection manually when connecting your TV to a network that requires a Static IP address. NTo get the IP address, subnet mask, gateway, and DNS values, contact your Internet Service Provider (ISP).
To set up your TV's wired network connection manually, follow these steps:1. Go to the Network Settings screen. (Network → Network Settings) 2. Select Start. The network connection screen appears and the verification process starts. 3. Select Stop. The verification process stops. Select IP Settings on network connection screen. The IP Settings