Samsung Plasma E7000 User Manual

Blaster
When you connect an IR Blaster with your 
TV, you can control connected external 
devices with your TV using the Smart 
Touch Control.
IR Blaster Pairing1.  
When you turn the IR Blaster on, the 
LED blinks.
2.  
Briefly point the IR Blaster toward 
the IR sensor of the TV and press the 
PAIRING  button at the bottom.
3.  
The connection icons appear on the 
bottom left of the screen, and the TV  

connects to IR Blaster automatically.
 
NIf the connection process failed, 
please turn off and on the IR Blaster, 
try again from step 2.
 
NTo set a Universal Remote Control 
after pairing an IR Blaster, select Ye s .
Precautions for Using an IR Blaster
 
NTo use an IR Blaster, the IR Blaster 
must be located nearby with external 
devices connected to the TV.
 
NNote that it should be no obstacle  

between the external device's IR 
receiver and an IR Blaster.
 
NInstall the IR Blaster within 50 cm 
and 45 degrees of the up, down, left 
and right directions of the IR sensor 
of the external device.
 
NIf you control an external device by 
using the Smart Touch Control, the 
IR Blaster sends an IR signal into a 
corresponding external device.
Setting up Universal Remote Control 

Lets you control a Set-Top Box (STB) 
or a BD player or both connected to the 
TV using your Smart Touch Control. 
After you connect the device to the TV, 
the Smart Touch Control can control 
the navigation, number, and other keys 
needed to operate and control the 
device.
 
NThe Universal Remote Control can 
adjust TV's volume, but STB's 
volume cannot be adjusted. Watch  

STB after adjusting STB's volume to 
appropriate level.
 
NDepending on the version of an 
application, the Universal Remote 
Setup instructions may differ. In this 
case, please follow the instructions 
on the screen.
To connect the external device to your 
Smart Touch Control, follow these 
steps: 1.  
Select  Add a device to control, and  

then press the touch pad.
2.  
Select an external device from the 
connected devices, and then press 
the touch pad.
3.  
Select the port used to connect the 
external device, and then press the 
touch pad.
 
NMake sure that the selected device 
is on. If it is turned off, turn the 
power on and press Refresh .
4.  
Select  Search Brands, and then press  

the Touch Pad. A keyboard and an 
entry field appear. Enter the first 
few letters of the brand name of 
your device using the Smart Touch 
Control, and then select Done at the 
bottom of the keyboard. In the list 
that appears below the entry field, 
select the brand name of your device, 
and then press the touch pad.
 
NIf you want to search the brand 
of STB (Set-Top box), you can  

search the STB by using the brand 
name or a cable provider.
5.  
Select  Search Model, and then press 
the touch pad. A keyboard and an 
entry field appear. Enter the first few 
letters and numbers of the model 
name of your device using the Smart 
Touch Control, and then select Done 
at the bottom of the keyboard. In 
the list that appears below the entry 
field, select the model name of your  

device, and then press the touch pad.
 
NIf the search for model name does 
not work properly, search with a 
part of the model name or use the 
search for recommended model 
code.
6.  
Select  Download , and then press 
the touch pad. Download the 
configuration data for the IR Blaster 
in the same way.
7.  
When all the settings are complete,  

select the Complete button and press 
the touch pad.
 
NTo reset IR Blaster and Smart Touch 
Control, press the  ‹ button on 
Smart Touch Control, and then select 
Set Up Universal Remote.
Using the Search for Recommended Model 
Code 1. 
In  the  Search Model step in the 
integrated remote control setup, 
select the Recommended and press