Samsung Plasma E7000 User Manual

in “Samsung SmartTV Bookmark” 
folder.
23.  
If the time is not set in the menu 
(System  
→  Time 
→ Clock
), the 
history information may not be 
saved.
24.  
Visited web site history is saved in 
chronological order and It will be 
removed from the list according to 
oldest page accessed.
25.  
Some video or audio content may  

not play during Flash playback 
depending on the video/audio codec 
supported.
26.  
A sudden change in the picture 
brightness inside the video window 
may affect the brightness of the 
surrounding stationary picture. 
 for 
PDP TV 
27. If you use QWERTY keyboard screen  when you use Web Browser with PIP 
function, the PIP function turns off  

automatically except inputting a URL 
address. 

Using the Smart Touch Control
 for LED 7500 series and above, PDP 8000 series 
Improved user convenience has been 
provided so that you can switch the channel 
and adjust the volume with just your 
fingertips while focusing on the TV screen. 
In addition, the built-in touch pad removes 
the need for a mouse when you change the 
menu settings and search for something on 
the Internet.
Smart Touch Control at a Glance 

 
●P : Turns the TV on and off.
 
●w  / 
v : Adjusts the Volume.
 
●<  / 
> : Changes channels.
 
●RETURN
R: Returns to the previous 
menu. 

 
●VOICE
˜: Lets you access the Voice 
Control function. When you press 
the button, the TV displays the 
command list. You can speak using the 
microphone embedded in your remote.
 
NFor more detailed information 
about the Voice Control function, 
see "SMART Interaction" in the 
e-manual.
 
●NUMBER
š: Displays the Number button 
screen. You can select a number using  

the Touch Pad.
 
●™ : Brings up the Smart Hub 
applications. See e-Manual chapter 
Advanced Features  → Smart Hub. To 
exit an application that is running 
easily, press the  ™ button.
 
NIf you don’t press any button within 30 
seconds, the Smart Touch Control is set 
to Sleep mode automatically. To wake 
up the Smart Touch Control, press the 
Touch Pad. 

Initial PairingAfter you have run the Initial Setup 
on your TV, you should connect your 
Smart Touch Control to your TV.
1.  
Point the Smart Touch Control 
toward the IR sensor of the TV and 
press any key on the Smart Touch 
Control.
2.  
The connection icon appears at the 
bottom left of the screen and the  

Smart Touch Control is automatically 
connected to the TV.
 
NIf you want to perform the pairing 
process again, press the reset button 
in the center of the back cover using 
a pin or the tip of an unbent paper 
clip. The Smart Touch Control will be 
initialized.
Smart Touch Control  PAIRING Reset 
button.
Calibrating the Touch Pad 

To calibrate the touch pad on the Smart 
Touch Control, follow these steps:1.  
Press  the  NUMBER
š button for 3 
seconds. The calibration starts.
2.  
When done, all the LEDs on the top 
of the Smart Touch Control blink 
twice simultaneously.
 
NWhile calibrating, don't touch the 
touch pad.
 
NIf the touch pad looses accuracy, re-
calibrate the touch pad by repeating