Samsung ML 5510ND User Manual

Regulatory information_ 21
CHINA ONLY
Downloaded From ManualsPrinter.com Manuals 

About this user’s guide_ 22
about this user’s guide
This user’s guide provides information about how to use the machine. Both novice and professional users can refer to this 
as a guide for installing and using the machine.
 • Read the safety information before using the machine.
• If yo u have a problem using the machine, re fe
 r to the troubleshooting chapter in the User’s Guide (See Troubleshooting on page  76 ).
• Terms used in  
 this user’s guide are ex plained in the glossary chapter (See...

About this user’s guide_ 23
FINDING MORE INFORMATION
You can find information for setting up and using your machine from the following resources, either as a print-out or on screen.
MATERIAL NAMEDESCRIPTION
Quick Installation 
Guid
 eThis guide provides basic information on setting up your machine.
User’s Guide
This guide provides you with step-by-step instructions for usi ng your machine’s full features, and contains information for mai ntaining 
your machine, troubleshooting and replacing supplies....

Features of your new product_ 24
features of your new product
Your new machine is equipped with a number of special  features that improve the quality of the documents you print.
SPECIAL FEATURES
Print with excellent quality and speed
•You can print with a resolution of up to 1,200 x 1,200 dpi 
effective output.
• ML-551
x Series prints A4-sized paper at up to 52 ppm, and 
letter-sized pa
 per at up to 55 ppm. 
• ML-651
x Series prints A4-sized paper at up to 62 ppm, and 
letter-sized pa
 per at up to 65...

Features of your new product_ 25
FEATURES BY MODELS
Some features and optional goods may not be available depending on models or countries.
Features by models include:
FEATURESML-5510N SERIES
ML-5510ND SERIES 
ML-5512ND SERIES
ML-5515ND SERIESML-6510ND SERIES 
ML-6512ND SERIES 
ML-6515ND SERIES 
USB 2.0 ●● ●
USB Memory Interface ●● ●
Network Interface Ethernet 10/100/1000 BaseTX wired LAN ●● ●
Duplex Unit ○● ●
Hard Disk Drive (HDD) ○○ ○
IEEE 1284 parallel connector
a
a. If you use the parallel port, you...

Introduction_ 26
1.introduction
This chapter gives you an ov erview of your machine:
This chapter includes:
•Machine overview
• Control panel overview
• Understanding the control panel
• Introducing the useful buttons
  
MACHINE OVERVIEW
Front view
7
10
11
4
5
6
9
12
14
13
8
2
1516
18
17
1
3
 
1Finishera(Stacker & Stapler)
 
7High capacity feeder (HCF)a
 
2Mailboxa 
8Paper level indicator 
3Stapler covera 
9Optional traya
 
4Control board cover 
10Tray1 
5Filter cover 
11Multi-purpose tray cover...

Introduction_ 27
Rear view
6
7
8
9
10
4
5
1
2
3
11
 
1Finisher covera
a. Optional device  (Stacker & Stapler)
 
7Power switch 
2Rear cover 
8Network port 
3Mailbox covera 
9USB port and IEEE 1284 parallel connectora
 
4Waste toner bottle cover 
10IEEE 802.11 b/g/
n Wireless LANa
 
5Duplex unitb
b. Optional for some models. 
 
11USB memory port
 
6Power receptacle
 
6Short standa 
12USB memory port 
13Control panel 
18Muti-purpose tray extension 
14Top cover 
15Toner cartridge 
16Imaging unit...

Introduction_ 28
CONTROL PANEL OVERVIEW
12
810345 679
 
1Display screen
Shows the current status and 
pr ompts during an operation.
 
2MenuEnters Menu mode and scrolls through the available menus (See  Machine status and advanced features  on 
page  64).
 
3BackSends you back to the upper menu level.
 
4Arrow Scroll through the options available in the sele cted men u, and increase or decrease values.
 
5OKConfirms the selection on the screen. 
6Numeric keypadUse the keypad to enter numbers and characte...

Introduction_ 29
UNDERSTANDING THE CONTROL PANEL
Status LEDs
The color of the LEDs indicates the machines current status.
LEDSTATUSDESCRIPTION
Off The machine is off-line.
Blinks 
gr een •
The machine is warming up.
• The machine is receiving data from a 
co
 mputer.
• T
he machine is printing data.
So

lid green The machine is online and can receive data 
from a computer.
Solid red •The cover is open. Close the cover.
• There is no paper in the tray. Load paper 
i
 n the tray.
• The machine has stopped...

Getting started_ 30
2.getting started
This chapter gives you step-by-step  instructions for setting up the USB connected machine and software.
This chapter includes:
•Setting up the hardware
• Printing a demo page
• Supplied software •
System requirements
• Installing locally connected machine’s driver
  
 Supported optional devices and features may differ according to your 
model. Please check your model name (See  Features by Models on 
page  25).
SETTING UP THE HARDWARE
This section shows the steps to...