Samsung ML 3051ND User Manual

2.7   
Changing the font setting
Your machine has preset the font for your region or country. If you want 
to change the font which you prefer or set the font under special 
condition such as the DOS environment, you can change the font setting 
as follows: 
1 Press  Menu on the control panel until you see  Emulation feature.
2 Press  OK to access the font setting.
3 Press the left/right arrow until  Setup displays.
4 Press the left/right arrow until  PCL displays.
5 Press the left/right arrow until...

3.1   
3 Software overview
This chapter gives you an overview of  the software that comes with your 
printer. Further details about installing and using the software are 
explained in the  Software Section .
This chapter includes:
• Supplied software
• Printer driver features
• System requirements
Supplied software
You must install the printer and scanner software using the supplied CDs 
after you have set up your printer an d connected it to your computer. 
Each CD provides you with the following...

3.2   
Printer driver features
Your printer drivers support th e following standard features:
•  Paper source selection
•  Paper size, orientation and media type
•  Number of copies
In addition, you can use various spec ial printing features. The following 
table shows a general overview of fe atures supported by your printer 
drivers: 
Note
Overlay is not supported in Windows NT 4.0
FeaturePCL 6 PostScript
WindowsWindowsMacintoshLinux
Toner save O
XXO
Print quality 
option OO OO
Poster 
printing O
XXX...

3.3   
Linux
Notes
• It is necessary to claim swap partition of 300 MB or larger for 
working with large scanned images.
• The Linux scanner driver supports the optical resolution at  maximum.
Macintosh
ItemRequirements
Operating system • Red Hat 8.0 ~ 9.0 • Fedora Core 1 ~ 3
• Mandrake 9.2 ~ 10.1
• SuSE 8.2 ~ 9.2
Processor Pentium IV 1 GHz or higher
RAM 256 MB or higher
Free disk page 1 GB or higher
Software • Linux Kernel 2.4 or higher • Glibc 2.2 or higher
• CUPS
•SANE
ItemRequirements
Operating...

4.1   
4 Network setup
This chapter gives you step-by-step instructions for setting up your 
printer for network connections.
This chapter includes:
• Introduction
• Supported operating systems
• Configuring TCP/IP
• Configuring EtherTalk
• Configuring IPX frame types
• Setting Ethernet speed
• Restoring the network configuration
• Printing a network configuration page
• Using SetIP program
Introduction
Once you have connected your printer to a network with an RJ-45 
Ethernet cable, you can share the...

4.2   
Static addressing
To enter a TCP/IP address from your printer’s control panel, take the 
following step: 
1 Press  Menu until Network  appears on the bottom line of the 
display and press 
OK.
2 Press  OK when  TCP/IP  appears.
3 Press the  Scroll buttons until  Static appears and press  OK.
4 Press  OK when  IP Address  appears. 
5 Set the first byte between 0 and 255 using the  Scroll buttons and 
press  OK to move to the next byte.
Repeat this to complete the address from the 1st byte to the...

4.3   
Setting Ethernet speed
You can select the communication speed for Ethernet connections.
1 Press  Menu until Network  appears on the bottom line of the 
display and press  OK.
2 Press the  Scroll buttons until  Ethernet Speed  appears and press 
OK .
3 Press the  Scroll buttons until the speed you want appears and 
press  OK.
4 Press  Stop to return to Standby mode.
Restoring the network configuration
You can return the network configuration to its default settings.
1Press  Menu until Network...

5.1   
5 Loading print media
This chapter will help you understand types of paper you can use with 
your printer and how to properly load paper in the different paper trays 
for the best print quality. 
This chapter includes:
• Selecting print media
• Loading paper
• Selecting an output location
Selecting print media
You can print on a variety of print media, such as plain paper, envelopes, 
labels, and transparencies. Always use print media that meet the 
guidelines for use with your printer.  Print...

5.2   
Supported sizes of paper
Note
For duplex printing, A4, Letter, Oficio , Legal, and Folio sizes are supported.
Ty p eSizeDimensionsWeighta
a. If media weight is over 24 lb (90 g/m2), use the multi-purpose tray.
Capacityb
b. Maximum capacity may differ depending on media  weight, thickness, and environmental conditions.
Plain paperLetter 215.9 x 279 mm (8.5 x 11 inches)
• 60 to 90 g/m
2 (16 to 24 lb 
bond ) for the tray
• 60 to 163 g/m
2 (16 to 43 lb 
bond ) for the multi-
purpose tray • 250 sheets...

5.3   
Guidelines for selecting  and storing print media
When selecting or loading paper, env elopes, or other print materials, 
keep these guidelines in mind:
•  Always use print media that confo rm with the specifications listed on 
page 5.3.
•  Attempting to print on damp, curl ed, wrinkled, or torn paper can cause 
paper jams and poor print quality.
•  For the best print quality, use only high quality copier grade paper  specifically recommended for use in laser printers.
•  Avoid using the...