Samsung ML 3051ND User Manual

1.1   
1 Introduction
Congratulations on the purchase of your printer! 
This chapter includes:
• Special features
• Printer overview
• Finding more information
Special features
Your new printer is equipped with several special features that improve 
the print quality. You can:
Print with excellent quality and high speed •  You can print up to  1200 x 1200 dpi effective 
output. See the  Software Section .
•  Your printer prints A4-sized paper at up to 28 ppm
a 
and letter-sized paper at up to 30 ppm. If...

1.2   
Printer features
The table below lists a general overview of features supported by your 
printer.
(I: Installed, O: Option, NA: Not Available)
FeaturesML-3050ML-3051NML-3051ND
IEEE 1284 Parallel I I I
USB 2.0 I I I
Network Interface
(Ethernet 10/100 Base TX) NA I I
Wireless LAN
(IEEE 802.11 b/g Wireless 
LAN) NA O O
PostScript* Em ulation NA I I
Duplex printing
a
a. Printing on both sides of paper.
NA NA I
Printer overview
Front view
1 output tray7 multi-purpose tray
2control panel8 front cover...

1.3   
Rear view
1
control board cover6 duplex unit
2network port7 power receptacle
3
USB port8 power switch
4parallel port9 rear cover
5optional tray 2 cable 
connector
*  The figure above shows an ML-3051ND with 
all available options.
Control panel overview
ML-3050
ML-3051N and ML-3051ND
1 To n e r  S a v e
: Allows you to save on toner by using less toner 
in printing.
2 Demo : Allows you to print a demo page.
3
Stop: Stops an operation at any time.
4
Status : Shows the status of your printer. See...

1.4   
Finding more information
You can find information for setting up and using your from the following 
resources, either printed or onscreen.
Quick Install 
Guide Provides information on setting up your printer 
and, therefore, be sure to follow the 
instructions in the guide to get the printer 
ready.
Online User’s 
Guide Provides you with step-by-step instructions for 
using your printer’s full features, and contains 
information for maintaining your printer, 
troubleshooting, and installing...

2.1   
2 System setup
This chapter provides step by step information on setting up your printer. 
This chapter includes:
• Using control panel menus (ML-3051N, ML-3051ND only)
• Menu overview
• Printing a demo page
• Changing the display language (ML-3051N, ML-3051ND only)
• Changing the font setting
• Using toner save mode
Using control panel menus (ML-3051N , ML-3051ND  only)
A number of menus are available to make it easy for you to change the 
printer settings. The diagram on the next column shows...

2.2   
Information menu
This menu contains printer information pages that give details about the 
printer and its configuration.
Layout menu
Use the  Layout menu to define all settings relating to output.
ItemExplanation
Menu Map The menu map shows the  layout and current 
settings of the control panel menu items.
Configuraton The configuration page shows the printer’s 
current configuration. See page 8.1.
Demo Page The demo page allows you to check if your 
printer properly performs printing. See 
page...

2.3   
Paper menu 
Use the  Paper menu to define all settings relating to print material input 
and output, as well as the specific  print material you are using with your 
printer.
ItemExplanation
Copies
Set the default number of copies by selecting any 
number from 1 to 999. 
Paper Size
Select the paper size currently loaded in the tray.
Paper Type
Select the paper type currently loaded in the tray.
Paper 
Source
Using this item, you can set which tray you want to 
use. 
• If you select 
Auto, the...

2.4   
System Setup menu
Use the  System Setup  menu to configure a vari ety of printer features.
ItemExplanation
Language
This setting determines the language of the text 
that appears on the control panel display and 
information printing.
Power Save
When the printer does not receive data for an 
extended period of time, power consumption is 
automatically lowered. You can set how long the 
printer waits before going to power save mode.
Auto 
Continue This item determines whether or not the printer...

2.5   
PCL
This menu sets the PCL emulation configuration. You can set the font 
type, symbol type, lines per page, and point size. 
ItemExplanation
Ty p e f a c e
You can select the standard font to be used in PCL 
emulation. 
• PCL1~PCL7’s interval between letters is fixed, and PCL8~PCL45’s interval is proportional to the font 
type and point size. You can adjust the font size of 
PCL1~PCL7 using the  Pitch item, and 
PCL8~PCL45 can do using 
Point Size item.
• PCL46~PCL54’s interval and point size...

2.6   
Network menu
This menu lets you configure the network interface installed in your 
printer. You can reset the network interface and print a configuration 
page.
ItemExplanation
TCP/IP
This item allows you to manually set the TCP/IP 
addresses or receive the addresses from the 
network.
•DHCP : The DHCP server allots the IP address to 
you automatically.
• BOOTP : The BOOTP server allots the IP address 
to you automatically. 
• Static : You can enter IP address, subnet mask, 
and gateway manually....