Samsung ML 2955ND User Manual

							Specifications715. Appendix
3 
System requirements
Microsoft® Windows®
 
 
Operating system
Requirement (recommended)
CPURAMfree HDD space
Windows® 2000Intel® Pentium® II 400 MHz (Pentium III 933 MHz) 64 MB (128 MB) 600 MB
Windows® XPIntel® Pentium® III 933 MHz (Pentium IV 1 GHz) 128 MB (256 MB) 1.5 GB
Windows Server® 2003Intel® Pentium® III 933 MHz (Pentium IV 1 GHz) 128 MB (512 MB) 1.25 GB to 2 GB
Windows Server® 2008Intel® Pentium® IV 1 GHz (Pentium IV 2 GHz) 512 MB (2 GB) 10 GB
Windows Vista®Intel® Pentium® IV 3 GHz 512 MB (1 GB) 15 GB
Windows® 7Intel® Pentium® IV 1 GHz 32-bit or 64-bit processor or higher 1 GB (2 GB) 16 GB
• Support for DirectX® 9 graphics with 128 MB memory (to enable the Aero theme).
•DVD-R/W Drive
Windows Server® 2008 R2Intel® Pentium® IV 1 GHz (x86) or 1.4 GHz (x64) processors (2 GHz or faster) 512 MB (2 GB) 10 GB
Downloaded From ManualsPrinter.com Manuals 
						

							Specifications725. Appendix
 
• Internet Explorer 6.0 or higher is the minimum requirement for all Windows operating systems.
• Users who have administrator rights can install the software.
•Windows Terminal Services is compatible with your machine.
• For Windows 2000, Services Pack 4 or higher is required. 
 
Macintosh
 
 
Operating system
Requirements (Recommended)
CPURAMFree HDD space
Mac OS X 10.4• Intel® processors
• PowerPC G4/ G5• 128 MB for a powerPC based 
Mac (512 MB)
• 512 MB for an Intel-based Mac 
(1 GB)1 GB
Mac OS X 10.5• Intel® processors
• 867 MHz or faster Power 
PC G4/ G5512 MB (1 GB) 1 GB
Mac OS X 10.6• Intel® processors 1 GB (2 GB) 1 GB
Downloaded From ManualsPrinter.com Manuals 
						

							Specifications735. Appendix
Linux
 
 
ItemsRequirements
Operating systemFedora 5~13 (32/ 64 bit)
OpenSuSE® 10.2, 10.3, 11.0, 11.1, 11.2 (32/64 bit)
SuSE 10.0, 10.1 (32 bit)
Ubuntu 6.06, 6.10, 7.04, 7.10, 8.04, 8.10, 9.04, 9.10, 10.04 (32/64 bit)
Mandriva 2007, 2008, 2009, 2009.1, 2010 (32/64 bit)
Debian 4.0, 5.0 (32/64 bit)
Redhat® Enterprise Linux WS 4, 5 (32/64 bit)
SuSE Linux Enterprise Desktop 10, 11 (32/64 bit)
CPUPentium IV 2.4GHz (Intel Core™2)
RAM512 MB (1 GB)
Free HDD space1 GB (2 GB)
Downloaded From ManualsPrinter.com Manuals 
						

							Specifications745. Appendix
Unix
4 
Network environment
 
Network and wireless models only (see "Features by models" on page 6).
 
You need to set up the network protocols on the machine to use it as your network machine. The following table shows the network 
environments supported by the machine.
 
ItemsRequirements
Operating systemSun Solaris 9, 10 (x86, SPARC) 
HP-UX 11.0, 11i v1, 11i v2, 11i v3 (PA-RISC, Itanium) 
IBM AIX 5.1, 5.2, 5.3, 5.4
Free HDD spaceUp to 100 MB
ItemsSpecifications
Network interface• Ethernet 10/100 Base-TX Wired Lan
• 802.11b/g/n Wireless LAN
Downloaded From ManualsPrinter.com Manuals 
						

							Specifications755. Appendix
 
Network operating system• Windows 2000/Server 2003 /Server 2008/XP/Vista/7/Server 2008 R2
•Various Linux OS
• Mac OS X 10.4 ~ 10.6
•Unix
Network protocols•TCP/IPv4
• DHCP, BOOTP
• DNS, WINS, Bonjour, SLP, UPnP
• Standard TCP/IP Printing (RAW), LPR, IPP, WSD
• SNMPv 1/2/3, HTTP, IPSec
• TCP/IPv6 (DHCP, DNS, RAW, LPR, SNMPv 1/2/3, HTTP, IPSec)
Wireless security • Authentication: Open System, Shared Key, WPA Personal, WPA2 Personal (PSK), WPA 
Enterprise, WPA2 Enterprise
•Encryption: WEP64, WEP128, TKIP, AES
ItemsSpecifications
Downloaded From ManualsPrinter.com Manuals 
						

							765. AppendixRegulatory information
This machine is designed for a normal work environment and 
certified with several regulatory statements.
5 
Laser safety statement
The printer is certified in the U.S. to conform to the requirements of 
DHHS 21 CFR, chapter 1 Subchapter J for Class I(1) laser products, 
and elsewhere is certified as a Class I laser product conforming to the 
requirements of IEC 60825-1 : 2007.
Class I laser products are not considered to be hazardous. The laser 
system and printer are designed so there is never any human access 
to laser radiation above a Class I level during normal operation, user 
maintenance or prescribed service condition.
Warning 
Never operate or service the printer with the protective cover 
removed from laser/scanner assembly. The reflected beam, 
although invisible, can damage your eyes.When using this product, these basic safety precautions should 
always be followed to reduce risk of fire, electric shock, and injury to 
persons:
6 
Ozone safety
7 
Power saver
This product's ozone emission rate is under 0.1 ppm. 
Because ozone is heavier than air, keep the product in 
a place with good ventilation.
Downloaded From ManualsPrinter.com Manuals 
						

							Regulatory information775. Appendix
8 
Recycling
9 
China onlyThis printer contains advanced energy conservation 
technology that reduces power consumption when it is 
not in active use.
When the printer does not receive data for an extended 
period of time, power consumption is automatically 
lowered. 
ENERGY STAR and the ENERGY STAR mark are 
registered U.S. marks. 
For more information on the ENERGY STAR program 
see http://www.energystar.gov
For ENERGY STAR certified models, the ENERGY STAR 
label will be on your machine. Check if your machine is 
ENERGY STAR certified.
Recycle or dispose of the packaging material for this 
product in an environmentally responsible manner.
Downloaded From ManualsPrinter.com Manuals 
						

							Regulatory information785. Appendix
10 
Correct disposal of this product (Waste 
electrical & electronic equipment)
(Applicable in the european union and other 
european countries with separate collection 
systems)
 The United States of America only
Dispose unwanted electronics through an approved recycler. To find 
the nearest recycling location, go to our 
website:www.samsung.com/recyclingdirect Or call, (877) 278 - 0799
11 
Radio frequency emissions
FCC information to the user
This device complies with Part 15 of the FCC Rules. Operation is 
subject to the following two conditions: 
• This device may not cause harmful interference, and
• This device must accept any interference received, including 
interference that may cause undesired operation.
This marking on the product, accessories or literature 
indicates that the product and its electronic accessories (e.g. 
charger, headset, USB cable) should not be disposed of with 
other household waste at the end of their working life. To 
prevent possible harm to the environment or human health 
from uncontrolled waste disposal, please separate these 
items from other types of waste and recycle them responsibly 
to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they 
purchased this product, or their local government office, for 
details of where and how they can take these items for 
environmentally safe recycling.
Business users should contact their supplier and check the 
terms and conditions of the purchase contract. This product 
and its electronic accessories should not be mixed with other 
commercial wastes for disposal.
Downloaded From ManualsPrinter.com Manuals 
						

							Regulatory information795. Appendix
This equipment has been tested and found to comply with the limits 
for a Class B digital device, pursuant to Part 15 of the FCC Rules. 
These limits are designed to provide reasonable protection against 
harmful interference in a residential installation. This equipment 
generates, uses and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause 
harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. 
If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from 
that to which the receiver is connected.
• Consult the dealer or experienced radio TV technician for help.
 
Change or modifications not expressly approved by the 
manufacturer responsible for compliance could void the 
user's authority to operate the equipment.
 
Canadian radio interference regulations
This digital apparatus does not exceed the Class B limits for radio 
noise emissions from digital apparatus as set out in the interference-
causing equipment standard entitled “Digital Apparatus”, ICES-003 
of the Industry and Science Canada.
Cet appareil numérique respecte les limites de bruits 
radioélectriques applicables aux appareils numériques de Classe B 
prescrites dans la norme sur le matériel brouilleur: “Appareils 
Numériques”, ICES-003 édictée par l’Industrie et Sciences Canada.
12 
United states of america
Federal communications commission (FCC)
►Intentional emitter per FCC Part 15
Low power, Radio LAN type devices (radio frequency (RF) wireless 
communication devices), operating in the 2.4 GHz/5 GHz Band, may 
be present (embedded) in your printer system. This section is only 
applicable if these devices are present. Refer to the system label to 
verify the presence of wireless devices.
Wireless devices that may be in your system are only qualified for use 
in the United States of America if an FCC ID number is on the system 
label.
Downloaded From ManualsPrinter.com Manuals 
						

							Regulatory information805. Appendix
The FCC has set a general guideline of 20 cm (8 inches) separation 
between the device and the body, for use of a wireless device near 
the body (this does not include extremities). This device should be 
used more than 20 cm (8 inches) from the body when wireless 
devices are on. The power output of the wireless device (or devices), 
which may be embedded in your printer, is well below the RF 
exposure limits as set by the FCC.
This transmitter must not be collocated or operation in conjunction 
with any other antenna or transmitter.
Operation of this device is subject to the following two conditions: 
(1) This device may not cause harmful interference, and (2) this 
device must accept any interference received, including interference 
that may cause undesired operation of the device.
 
Wireless devices are not user serviceable. Do not modify 
them in any way. Modification to a wireless device will void 
the authorization to use it. Contact manufacturer for service.
 
FCC statement for wireless LAN use:
 
While installing and operating this transmitter and antenna 
combination the radio frequency exposure limit of 1m W/
cm2 may be exceeded at distances close to the antenna 
installed. Therefore, the user must maintain a minimum 
distance of 20cm from the antenna at all times. This device 
cannot be colocated with another transmitter and 
transmitting antenna.
 
13 
Russia only
14 
Germany only
Downloaded From ManualsPrinter.com Manuals