Samsung ML 1865 User Manual

							ML-1860 Series
ML-1865 Series
Mono Laser Printer
User’s Guide
imagine the possibilities
Thank you for purchasing a Samsung product. 
Downloaded From ManualsPrinter.com Manuals 
						

							Copyright_ 2
copyright
© 2010 Samsung Electronics Co., Ltd. All rights reserved.
This user’s guide is provided for information purposes only. All information included herein is subject to change without notice.
Samsung Electronics is not responsible for any direct or indirect damages, arising from or related to use of this user’s guide.
•Samsung and Samsung logo are trademarks of Samsung Electronics Co., Ltd.
•PCL and PCL 6 are trademarks of Hewlett-Packard Company.
•Microsoft, Internet Explorer, Windows, Windows Vista, Windows 7 and Windows 2008 Server R2 either registered trademarks or trademarks of Microsoft 
Corporation.
•PostScript 3 is a trademark of Adobe System, Inc.
•UFST® and MicroType™ are registered trademarks of Monotype Imaging Inc.
•TrueType, Mac and Mac OS are trademarks of Apple Inc., registered in the U.S and other countries.
•LaserWriter is a trademark of Apple Inc.
•All other brand or product names are trademarks of their respective companies or organizations.
Refer to the LICENSE.txt file in the provided CD-ROM for the open source license information.
REV. 1.04
Downloaded From ManualsPrinter.com Manuals 
						

							Safety information_ 3
safety information
These warnings and precautions are included to prevent injury to you and others, and to prevent any potential damage to 
your machine. Be sure  to read and understand all  of these instructions before using the machine.
Use common sense for operatin g any electrical appliance and whenever using your machine. Also, follow all warnings and 
instructions marked on the machin e and in the accompanying li

terature. After reading this section, keep it in a safe place 
for future reference.
Important safety symbols
This section explains the meanings of all icons and signs in th e users guide. These safety symbols are in order, according to  the degree of 
danger.
Explanation of all icons and signs used in the user’s guide:
Warning Hazards or unsafe practices that may result in severe personal injury or death.
CautionHazards or unsafe practices that may result  in  minor personal injury or property damage.
Do not attempt.
Do not disassemble.
Do not touch.
Unplug the power cord from the wall socket.
Make sure the machine is grounded to prevent electric shock.
Call the service center for help.
Follow directions explicitly.
Operating environment
 Warning
Do not use if the power cord is damaged or if the 
electrical outlet is not grounded.
►  This could result in electric shock or fire. Do not bend, or place heavy objects on the power 
cord. 
►  Stepping on or allowing the power cord to be 
cru
 shed by a heavy object could result in electric 
shock or fire. 
Do not place anything on top of the machine (water, 
small metal or heavy objects, candles, lit cigarettes, 
etc.).
►  This could result in electric shock or fire. Do not remove the plug by pulling on the cord; do not 
handle the plug with wet hands. 
►  This could result in electric shock or fire. 
Downloaded From ManualsPrinter.com Manuals 
						

							Safety information_ 4
 Caution
During an electrical storm or for a period of 
non-operation, remove the power plug from the 
ele
ctrical outlet. 
►  This could result in electric shock or fire. 
If the plug does not easily ente r the electrical outlet, do not 
attempt to force it in. 
►  Call an electrician to change the electrical outlet, or this 
could result in electric shock.
Be careful, the paper output area is hot. 
►  Burns could occur. Do not allow pets to chew on the AC power, telephone or PC 
interface cords.
►  This could result in electric sho ck o
 r fire and/or injury to your 
pet. 
If the machine has been dropped, or if the cabinet appears 
damaged, unplug the machine from all interface connections 
and
 request assistance from qualified service personnel.
►  Otherwise, this could result  in electr
 ic shock or fire.
If the machine does not operate properly after these 
instructions have been followed, unplug the machine from all 
interface conn
ections and request assistance from qualified 
service personnel.
►  Otherwise, this could result in electric shock or fire.
If the machine exhibits a sudden and distinct change in 
performance, unplug the machine from all interface 
conn
ections and request assistance from qualified service 
personnel.
►  Otherwise, this could result  in ele
 ctric shock or fire.
Operating method
 Caution
Do not forcefully pull the paper out during printing. 
► It can cause damage to the machine.When printing large quantit ies, the bottom part of the 
paper output area may get hot. Do not allow children 
to touch. 
►  Burns can occur.
Be careful not to put your hand between the machine 
and paper tray.
►  You may get injured.When removing jammed paper, do not use tweezers 
or sharp metal objects. 
►  It can damage the machine.
Do not block or push objects into the ventilation opening.
►  This could result in elevated  compo
 nent temperatures which 
can cause damage or fire.
Do not allow too many papers to  stack up in the paper output 
tray.
►  It can damage the machine. 
Be care when replacing paper or removing jammed paper. 
►  New paper has sharp edges and can cause painful cuts.This machines power interception device is the power cord. 
►  To switch off the power supply, remove the power cord from 
the el
 ectrical outlet. 
If the machine gets overh
eated, it 
 releases smoke, 
makes strange noises, or generates an odd odor, 
imme
 diately turn off the power switch and unplug the 
machine.
►  This could result in electric shock or fire. 
Downloaded From ManualsPrinter.com Manuals 
						

							Safety information_ 5
Installation / Moving
 Warning
Do not place the machine in an area with dust, 
humidity or water leaks. 
► This could result in electric shock or fire. 
 Caution
Before moving the machine, turn the power off and 
disconnect all cords.
Then lift the machine:
•  
If the machine weighs under 20 kg (44.09lb), lift with 
1 person.
• I
f the machine weighs 20 kg (44.09lb) - 40kg 
(88.18lb), lift with 2 people.
• If the
 machine weighs more than 40 kg (88.18lb), lift 
with 4 or more people.
►  The machine could fall, causing injury or machine damage.
Do not put a cover over the machine or place it in an airtight 
location, such as a closet.
►  If the machine is not well-ventilated, this could result in fire.
Do not place the machine on an unstable surface.
►  The machine could fall, causing injury or machine damage.Make sure you plug the power cord into a grounded electrical 
outlet.
►  Otherwise, this could result in electric shock or fire.
The machine should be connected to 
the power level which is specified on the label.
►  If you are unsure and want to check the power level you are 
u

sing, contact the elec trical utility company.
Do not overload wall outlets and extension cords.
► This can diminish performance, and could result in electric 
shock
  or fire.
Use only No.26 AWGa
a.  AWG: American Wire Gauge  or larger, telephone line cord, if 
necessary.
►  Otherwise, it can cause damage to the machine.
Use the power cord supplied with your machine for safe 
operation. If you are using a cord which is longer than 2 meters 
(6 fe

et) with a 140V machine, then the gauge should be 16 
AWG or larger.
►   Otherwise, it can cause damag e to
  the machine, and could 
result in electric shock or fire.
Maintenance / Checking
 Caution
Unplug this product from the wall outlet before 
cleaning the inside of the machine.  Do not clean
  the 
machine with benzene, paint thinner or alcohol; do 
not spray water directly  into the machine. 
►  This could result in electric shock or fire. 
Keep cleaning supplies away from children. 
►  Children could get hurt.
Downloaded From ManualsPrinter.com Manuals 
						

							Safety information_ 6
Supply usage
 Caution
Do not disassemble the toner cartridge.
► Toner dust can be dangerous if inhaled or 
i

ngested.
When storing supplies such as toner cartridges, keep 
them away from children.
►  Toner dust can be dangerous if inhaled or 
inge
 sted.
Do not burn any of the supplies such as toner 
cartridge or fuser unit.
►  This could cause an explosion or uncontrollable 
fi

re.
Using recycled supplies, such as toner, can cause damage to 
the machine.
►  In case of damage due to the use of recycled supplies, a 
service
  fee will be charged.
When changing the toner cartridge or removing jammed paper, 
be careful not to let toner dust touch your body or clothes.
►  Toner dust can be dangerous if inhaled or ingested.When toner gets on your clothing, do not use hot water to wash 
it. 
►  Hot water sets toner into fabric. Use cold water. 
When you are working inside the machine replacing 
supplies or cleaning the in
si
 de, do not operate the 
machine.
►  You could get injured.
Do not disassemble, repair or rebuild the machine by 
yourself. 
►  It can damage the machine. Call a certified 
tech
 nician when the machine needs repair.
Keep the power cable and the contact surface of the plug clean 
from dust or water.
►  Otherwise, this could result  in electr
 ic shock or fire. 
To clean and operate the machine, strictly follow the users 
guide provided with the machine.
►  Otherwise, you could damage the machine.
Do not remove any covers or guards that are fastened with 
screws. 
►  The machine should only be repaired by a Samsung service 
technician.
Downloaded From ManualsPrinter.com Manuals 
						

							Regulatory information_ 7
regulatory information
This machine is designed for a normal work environment and certified with several regulatory statements.
Laser Safety Statement
The printer is certified in the U.S. to c onform to the requirements of DHHS 21 CFR, chapter 1 Subchapter J for Class I(1) laser  products, and 
elsewhere is certified as a Class I laser produc t conforming to the requirements of IEC 60825-1.
Class I laser products are not considered  to be 
 hazardous. The laser system and printer are designed  so there is never any human access to 
laser radiation above a Class I level during normal operati on, user maintenance or prescribed service condition.
• Wav
elength:  800 nm
• Beam d
 ivergence
-Paraller:  11 degrees
- Perpendicular:  35 degrees
• Ma
ximum power of energy output:  12 mW
WARNING 
Never operate or service the printer with t he protective cover removed from Laser/Sca nner assembly. The reflected beam, although invisible, 
can damage your eyes.
When using this product, these basic safety precautions should al ways 
 be followed to reduce risk of fire, electric shock, and injury to persons:
Ozone Safety
During normal operation, this machine produces ozone. The ozone  produced does not present a hazard to the operator. However, it is 
advisable that the machine be operated in a well ventilated area.
If you need additional information about ozone, contact your local Samsung dealer.
Downloaded From ManualsPrinter.com Manuals 
						

							Regulatory information_ 8
Power Save
This printer contains advanced energy conservation technology th at reduces power consumption when it is not in active use.
When the printer does not receive data for an extended perio d of 
 time, power consumption is automatically lowered. 
ENERGY STAR and the ENERGY STAR  ma
 rk are registered U.S. marks. 
For more information on the ENERGY STAR  progra
 m see http://www.energystar.gov.
Recycling
Recycle or dispose of the packaging material for this product in an environmentally responsible manner.
China only
Correct Disposal of This Product (Waste  Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking shown on the product, accessories or literature i ndicates that the product and its electronic accessories (e.g. ch arger, headset, 
USB cable) should not be disposed of with other household wastes  at the end of its working life. To prevent possible harm to th e environment 
or human health from  uncontrolled waste dis posal, separate this from ot her types of wastes and recycle it responsibly to promot e the 
sustainable reuse of material resources. 
Household users should contact either the re ta
 iler where they purchased this product, or their local government office, for details of where and 
how they can take this item for environmentally safe recycling. 
Business users should contact their supplier and check the terms and  con
 ditions of the purchase contract. This product should not be mixed 
with other commercial wastes for disposal.
Radio Frequency Emissions
FCC Information to the User
This device complies with Part 15 of  the FCC Rules. Operation is subject to the following two conditions: 
• Thi
s device may not cause harmful interference, and
•This 
device must accept  any interference received, including inte rference that may cause undesired operation.
This equipment has been tested and found to comply with the limit s fo
 r a Class B digital device, pursuant to Part 15 of the FCC Rules. These 
limits are designed to provide reasonable protection against harmf ul interference in a residential installation. This equipment generates, uses 
and can radiate radio frequency energy and, if  not installed and used in accordance with the instructions, may cause harmful interference to 
radio communications. However, there is no  guarantee that interference will not occur in a particular installation. If this equ ipment does cause 
harmful interference to radio or television reception, which can  be determined by turning the equipment off and on, the user is encouraged to 
try to correct the interference by one or more of the following measures:
Downloaded From ManualsPrinter.com Manuals 
						

							Regulatory information_ 9
•Reorient or relocate the receiving antenna.
• Incre
ase the separation between the equipment and receiver.
•Conn
ect the equipment into an outlet on a circuit diff erent from that to which the receiver is connected.
• Consul
t the dealer or experienced radio TV technician for help.
 Change or modifications not expressly approv ed by the manufacturer responsible for compliance could void the users authority to 
operate the equipment.
Canadian Radio Interference Regulations
This digital apparatus does not exceed the Class B limits for radi o noise emissions from digital apparatus as set out in the interference-causing 
equipment standard entitled “Digital Apparatus” , ICES-003 of the Industry and Science Canada.
Cet appareil numérique respecte les limites de bruits radioélectri
 ques applicables aux appareils numériques de Classe B prescrites dans la 
norme sur le matériel brouilleur: “Appareils Numériques”, ICES-003 édictée  par l’Industrie et Sciences Canada.
Russia only
Yalnızca Türkiye
Germany only
Replacing the Fitte d Plug (for UK Only)
Important
The mains lead for this machine is fitted with a standard (BS 1363)  13 amp plug and has a 13 amp fuse. When you change or examine the 
fuse, you must re-fit the correct 13 amp fuse. You then need to  replace the fuse cover. If you have lost the fuse cover, do not use the plug until 
you have another  fuse cover. 
Contact the people from you purchased the machine.
The 13 amp plug is the most widely used type in the UK and should  be suitabl
 e. However, some buildings (mainly old ones) do not have normal 
13 amp plug sockets. You need to buy a suitable plug adaptor. Do not remove the moulded plug.
 
If you cut off the moulded plug,  get rid of it straight away.
You cannot rewire the plug and you may receive an  electric shock if 
 you plug it into a socket.
Downloaded From ManualsPrinter.com Manuals 
						

							Regulatory information_ 10
Important warning: 
You must earth this machine.
The wires in the mains lead have the following color code:
•G
reen and Yellow:  Earth
• Blue:  Neutral
• Brow
n:  Live
If the wires in the mains lead do not match the colors marked in your plug, do the following:
You must connect the green and yellow wire to the pin marked by the 
 letter “E” or by the safety ‘Earth symbol’ or colored green and yellow or 
green.
You must connect the blue wire to the pin whic h
  is marked with the letter “N” or colored black.
You must connect the brown wire to the pin wh ich is marked with th
 e letter “L” or colored red.
You must have a 13 amp fuse in the plug,  
 adaptor, or at the distribution board.
Declaration of Conformity (European Countries)
Approvals and Certifications
The CE marking applied to this product symbolizes Samsung Electron ics Co., Ltd. Declaration of Conformity with the following applicable 
93/68/EEC Directives of the European  Union as of the dates indicated:
Hereby, Samsung Electronics declare that this  
 product is in compliance with the essential requirements and other relevant provisions of:
ML-1860 Series/ML-1865 Series:   Low Voltage Directive (2006/95/EC ) a
 nd Directive (2004/108/EC).
The declaration of conformity may be consulted at www.samsung.com/printer , go to Support > Download center and enter your printer (MFP) 
name to browse the EuDoC. 
January 1, 1995:  Council Directive 2006/95/EC Approximation of the laws of  
 the member states related to low voltage equipment.
January 1, 1996:  Council Directive 2004/108/EC (92/31/EEC),  app
 roximation of the laws of the Member States related to electromagnetic 
compatibility.
March 9, 1999:  Council Directive 1999/5/EC on radio equipment and telecommu n
 ications terminal equipment and the mutual recognition of 
their conformity. A full declaration, defining the relevant Direc tives and referenced standards can be obtained from your Samsu ng Electronics 
Co., Ltd. representative.
EC Certification
Certification to 1999/5/EC Radio Equipment & Telecommunications Terminal Equipment Directive (FAX)
This Samsung product has been self-certified by Samsung for pa n-Europ
 ean single terminal connection to the analogue public switched 
telephone network (PSTN) in accordance with  Directive 1999/5/EC. The product has been designed to work with the national PSTNs and 
compatible PBXs of the European countries:
In the event of problems, you should  contact the 
 Euro QA Lab of Samsung Electronics Co., Ltd. in the first instance.
The product has been tested against TBR21. To assist in the use and ap
 plication of terminal equipment which complies with this standard, the 
European Telecommunication Standards Institut e (ETSI) has issued an advisory document (EG 201 121) which contains notes and add itional 
requirements to ensure network compatibility of TBR21 termina ls. The product has been designed against, and is fully compliant with, all of the 
relevant advisory notes contained in this document.
Downloaded From ManualsPrinter.com Manuals