Samsung ML 1865 User Manual

FunctionDescription
Power On/OffPress this button to turn the power on or off. 
Cancel print jobDuring printing, press this button once. The 
prin
t job is cleared from both the machine and 
the computer and then the machine returns to 
the ready mode. This may take some time 
depending on the size of the print job.
 If you press this button for more than 2 
seconds, the power goes off. 
Introduction _ 21
Turning on the machine
1.Plug in the power cord.
2. Pr
ess  on the control panel.
 If you want to...

Getting started_ 22
2.getting started
This chapter gives you step-by-step  instructions for setting up the USB connected machine and software.
This chapter includes:
•Setting up the hardware
• Printing a configuration sheet
• Supplied software •
System requirements
• Installing USB connected machine’s driver
• Sharing your machine locally
  
Setting up the hardware
This section shows the steps to set up the hardware, as is explained in the 
Quick Install Guide. Make sure you read the Quick Install Guide...

Getting started_ 23
System requirements
Before you begi n, ensure that your  system meets the following 
requirements:
Windows
Your machine supports the fo llowing Windows operating systems.
OPERATING 
SYSTEMRequirement (recommended)
CPURAMfree HDD 
space
Windows® 
200
 0 Intel® Pentium® II 400 
MHz (Pe
ntium III 933 
MHz) 64 MB 
 
(128 MB) 600 MB
Windows® XP Intel® Pentium® III 933 
MHz (Pe

ntium IV 1 GHz) 128 MB  
(256 MB)1.5 GB
Windows 
Serv
 er® 2003 Intel® Pentium® III 933 
MHz (Pe
ntium IV 1 GHz)...

Getting started_ 24
Windows 2008 Server R2, click  Run Setup.exe  in Install or run 
program  field, and click  Continue or Yes  in the  User Account 
Control  windows.
3. Select  In
 stall now.
If necessary, select a language from the drop-down list.
 The Advanced Installation  has an option, Custom Installation . 
The  Custom Installation  allows you to select the machine’s 
connection and choose individual component to install. Follow the 
instruction on the window.
4. Read
 the  License Agreement ,...

Getting started_ 25
d) After uninstalling the printer driver, reinstall it (see “Installing USB 
connected machine’s driver” on page 23).
Macintosh
The software CD that came with your  machine provides you with the PPD 
file that allows you to use the CUPS driver or Apple LaserWriter driver (only 
available when you use a machine which supports the PostScript driver) for 
printing on a Macintosh computer. 
1. Ma
ke sure that the machine is conne cted to your computer and powered 
on.
2. In
sert the...

Getting started_ 26
[root@localhost uninstall]#./uninstall.sh
d) Cli
ck  Uninstall .
e) Cli
ck  Next. 
f) Cli
ck  Finish.
Installing the SmartPanel
1.Make sure that the machine is connected to your computer and 
powered on.
2. Wh
en the Administrator Login  window appears, type in root in the 
Login  field and enter t he system password.
 You must log in as a super user  (root) to install the machine 
software. If you ar e not a super user, ask your system 
administrator.
3. Fro
m the Samsung we bsite,...

Basic setup_ 27
3.basic setup
After installation is complete, you may want to set the machine’s default settings. Refer to the next section if you would like 
to set or change values. This chapter gives you step-by-step instructions for setting up the machine.
This chapter includes:
•Setting the default tray and paper  
Setting the default tray and paper
You can select the tray and paper you would like to keep using for printing 
job.
From your computer
Windows
1.Click the Windows Start menu. 
2.For...

Media and tray_ 28
4.media and tray
This chapter provides information on how  to load print media into your machine.
This chapter includes:
•Selecting print media
• Changing the tray size
• Loading paper in the tray •
Printing on special media
• Changing the tray size
  
Selecting print media
You can print on a variety of print me dia, such as plain paper, envelopes, 
labels, and transparencies. Always use print media that meets the 
guidelines for use with your machi ne and from the appropriate tray....

Media and tray_ 29
1.Open front cover and pinch the paper length guide and pull it out to 
extend the tray.
 Because the machine is very light, it can move when you open and 
close the tray or install and remo ve the toner cartridge. Be careful 
not to move the machine when performing these tasks.
2. Fle
x or fan the edge of the paper  stack to separate the pages before 
loading the paper. Insert the paper into the tray.
3. Load paper with the print side facing up. Make sure that all four corners 
are...

Media and tray_ 30
•Always load the use recommended print media to avoid paper jams 
and print quality problems. (See  Print media specifications on 
page  62.)
• Fl
atten any curl on postcards, envelopes, and labels before loading 
them into the tray.
1. Loa
d the paper in the tray.
 •When printing on special media, you must follow the 
loading guideline. (See  Printing on special media on 
page  30 .)
• W
hen paper does not feed well while printing, gently push 
the paper in manually until it  starts...