Samsung ML 1630W User Manual
Have a look at the manual Samsung ML 1630W User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
1 SOFTWARE SECTION C ONTENTS Chapter 1: INSTALLING PRINTER SOFTWARE IN WINDOWS Installing Printer Software ........................................................................................................ 4 Installing Software for Local Printing ................................................................................. 4 Installing Software for Network Printing ............................................................................. 7 Reinstalling Printer Software ................................................................................................... 11 Removing Printer Software ..................................................................................................... 11 Chapter 2: BASIC PRINTING Printing a Document .............................................................................................................. 12 Printing to a file (PRN) .......................................................................................................... 13 Printer Settings ..................................................................................................................... 13 Layout Tab .................................................................................................................. 14 Paper Tab .................................................................................................................... 14 Graphics Tab ............................................................................................................... 15 Extras Tab ................................................................................................................... 16 About Tab ................................................................................................................... 16 Printer Tab .................................................................................................................. 16 Using a Favorite Setting ................................................................................................ 17 Using Help ................................................................................................................... 17 Downloaded From ManualsPrinter.com Manuals
2 Chapter 3: ADVANCED PRINTING Printing Multiple Pages on One Sheet of Paper (N-Up Printing) ..................................................... 18 Printing Posters ..................................................................................................................... 19 Printing a Reduced or Enlarged Document ................................................................................ 19 Fitting Your Document to a Selected Paper Size ......................................................................... 19 Using Watermarks ................................................................................................................. 20 Using an Existing Watermark ......................................................................................... 20 Creating a Watermark ................................................................................................... 20 Editing a Watermark ..................................................................................................... 20 Deleting a Watermark ................................................................................................... 20 Using Overlays ...................................................................................................................... 21 What is an Overlay? ...................................................................................................... 21 Creating a New Page Overlay ......................................................................................... 21 Using a Page Overlay .................................................................................................... 21 Deleting a Page Overlay ................................................................................................ 21 Chapter 4: SHARING THE PRINTER LOCALLY Setting Up a Host Computer ................................................................................................... 22 Setting Up a Client Computer .................................................................................................. 22 Chapter 5: USING SMART PANEL Understanding Smart Panel .................................................................................................... 23 Opening the Troubleshooting Guide ......................................................................................... 24 Using Printer Settings Utility ................................................................................................... 24 Using Onscreen Help File ............................................................................................... 24 Changing the Smart Panel Program Settings ............................................................................. 24 Downloaded From ManualsPrinter.com Manuals
3 Chapter 6: USING YOUR PRINTER IN LINUX Getting Started ..................................................................................................................... 25 Installing the Unified Linux Driver ............................................................................................ 25 Installing the Unified Linux Driver ................................................................................... 25 Uninstalling the Unified Linux Driver ............................................................................... 26 Using SetIP program .............................................................................................................. 27 Starting the program .................................................................................................... 27 Using the Unified Driver Configurator ....................................................................................... 27 Opening the Unified Driver Configurator .......................................................................... 27 Printers Configuration ................................................................................................... 28 Ports Configuration ....................................................................................................... 28 Configuring Printer Properties ................................................................................................. 29 Printing a Document .............................................................................................................. 29 Printing from Applications .............................................................................................. 29 Printing Files ................................................................................................................ 30 Chapter 7: USING YOUR PRINTER WITH A MACINTOSH Installing Software ................................................................................................................ 31 Uninstalling software ............................................................................................................. 31 Using SetIP program .............................................................................................................. 32 Setting Up the Printer ............................................................................................................ 32 For a Network-connected ............................................................................................... 32 For a USB-connected .................................................................................................... 33 Printing ................................................................................................................................ 34 Printing a Document ..................................................................................................... 34 Changing Printer Settings .............................................................................................. 34 Printing Multiple Pages on One Sheet of Paper .................................................................. 35 Downloaded From ManualsPrinter.com Manuals
Installing Printer Software in Windows 4 1Installing Printer Software in Windows This chapter includes: • Installing Printer Software • Reinstalling Printer Software •Removing Printer Software NOTE: The following procedure is based on Windows XP, for other operating systems, refer to the corresponding Windows users guide or online help. Installing Printer Software You can install the printer software for local printing or network printing. To install the printer software on the computer, perform the appropriate installation procedure depending on the printer in use. A printer driver is software that lets your computer communicate with your printer. The procedure to install drivers may differ depending on the operating system you are using. All applications should be closed on your PC before beginning installation. Installing Software for Local Printing A local printer is a printer directly attached to your computer using the printer cable supplied with your printer, such as a USB or parallel cable. If your printer is attached to a network, skip this step and go to “Installing Software for Network Printing” on page 7. You can install the printer software using the typical or custom method. NOTE: If the “New Hardware Wizard” window appears during the installation procedure, click in the upper right corner of the box to close the window, or click Cancel. Typical Installation This is recommended for most users. All components necessary for printer operations will be installed. 1Make sure that the printer is connected to your computer and powered on. 2Insert the supplied CD-ROM into your CD-ROM drive. The CD-ROM should automatically run, and an installation window appears. If the installation window does not appear, click Start and then Run. Type X:\Setup.exe, replacing “X” with the letter which represents your drive and click OK. If you use Windows Vista, Windows 7 and Windows Server 2008 R2, click Start → All programs → Accessories → Run, and type X:\Setup.exe. If the AutoPlay window appears in Windows Vista, Windows 7 and Windows Server 2008 R2, click Run Setup.exe in Install or run program field, and click Continue in the User Account Control window. 3Click Next. • If necessary, select a language from the drop-down list. • View User’s Guide: Allows you to view the User’s Guide. If your computer doesn’t have Adobe Acrobat, click on this option and it will automatically install Adobe Acrobat Reader for you. Downloaded From ManualsPrinter.com Manuals
Installing Printer Software in Windows 5 4Select Typical installation for a local printer. Click Next. NOTE: If your printer is not already connected to the computer, the following window will appear. • After connecting the printer, click Next. • If you don’t want to connect the printer at this time, click Next, and No on the following screen. Then the installation will start and a test page will not be printed at the end of the installation. • The installation window that appears in this User’s Guide may differ depending on the printer and interface in use. 5After the installation is finished, a window asking you to print a test page appears. If you choose to print a test page, select the checkbox and click Next. Otherwise, just click Next and skip to step 7. 6If the test page prints out correctly, click Yes. If not, click No to reprint it. 7To register yourself as a user of Samsung Printers in order to receive information from Samsung, select the checkbox and click Finish. You are now sent to the Samsung web site. Otherwise, just click Finish. NOTE: After setup is complete, if your printer driver doesn’t work properly, reinstall the printer driver. See “Reinstalling Printer Software” on page 11. Custom Installation You can choose individual components to install. 1Make sure that the printer is connected to your computer and powered on. 2Insert the supplied CD-ROM into your CD-ROM drive. The CD-ROM should automatically run, and an installation window appears. If the installation window does not appear, click Start and then Run. Type X:\Setup.exe, replacing “X” with the letter which represents your drive and click OK. If you use Windows Vista, Windows 7 and Windows Server 2008 R2, click Start → All programs → Accessories → Run, and type X:\Setup.exe. If the AutoPlay window appears in Windows Vista, Windows 7 and Windows Server 2008 R2, click Run Setup.exe in Install or run program field, and click Continue in the User Account Control window. Downloaded From ManualsPrinter.com Manuals
Installing Printer Software in Windows 6 3Click Next. • If necessary, select a language from the drop-down list. • View User’s Guide: Allows you to view the User’s Guide. If your computer doesn’t have Adobe Acrobat, click on this option and it will automatically install Adobe Acrobat Reader for you. 4Select Custom installation. Click Next. 5Select your printer and click Next. NOTE: If your printer is not already connected to the computer, the following window will appear. • After connecting the printer, click Next. • If you don’t want to connect the printer at this time, click Next, and No on the following screen. Then the installation will start and a test page will not be printed at the end of the installation. • The installation window that appears in this User’s Guide may differ depending on the printer and interface in use. 6Select the components to be installed and click Next. NOTE: You can change the desired installation folder by clicking [Browse]. 7After the installation is finished, a window asking you to print a test page appears. If you choose to print a test page, select the checkbox and click Next. Otherwise, just click Next and skip to step 9. 8If the test page prints out correctly, click Yes. If not, click No to reprint it. Downloaded From ManualsPrinter.com Manuals
Installing Printer Software in Windows 7 9To register yourself as a user of Samsung Printers in order to receive information from Samsung, select the checkbox and click Finish. You are now sent to the Samsung web site. Otherwise, just click Finish. Installing Software for Network Printing When you connect your printer to a network, you must first configure the TCP/IP settings for the printer. After you have assigned and verified the TCP/IP settings, you are ready to install the software on each computer on the network. You can install the printer software using the typical or custom method. Typical Installation This is recommended for most users. All components necessary for printer operations will be installed. 1Make sure that the printer is connected to your network and powered on. For details about connecting to the network, see the supplied printer’s User’s Guide. 2Insert the supplied CD-ROM into your CD-ROM drive. The CD-ROM should automatically run, and an installation window appears. If the installation window does not appear, click Start and then Run. Type X:\Setup.exe, replacing “X” with the letter which represents your drive and click OK. If you use Windows Vista, Windows 7 and Windows Server 2008 R2, click Start → All programs → Accessories → Run, and type X:\Setup.exe. If the AutoPlay window appears in Windows Vista, Windows 7 and Windows Server 2008 R2, click Run Setup.exe in Install or run program field, and click Continue in the User Account Control window. 3Click Next. • If necessary, select a language from the drop-down list. • View User’s Guide: Allows you to view the User’s Guide. If your computer doesn’t have Adobe Acrobat, click on this option and it will automatically install Adobe Acrobat Reader for you. Downloaded From ManualsPrinter.com Manuals
Installing Printer Software in Windows 8 4Select Typical installation for a network printer. Click Next. NOTE: If your printer is not connected to the network, the following window will appear. Select a setup option you want, click Next. Then the Set IP Address window appears. Do as follows: 1.Select a printer to be set with a specific IP address from the list. 2.Configure an IP address, subnet mask, and gateway for the printer manually and click Configure to set the specific IP address for the network printer. 3.Click Next, and go to step 6. • You can also set the network printer via SyncThruTM Web Service, an embedded web server. Click Launch SWS on Set IP Address window. Your machine’s embedded website opens. 5The list of printers available on the network appears. Select the printer you want to install from the list and then click Next. • If you do not see your printer on the list, click Update to refresh the list, or select Add TCP/IP Port to add your printer to the network. To add the printer to the network, enter the port name and the IP address for the printer. To verify your printer’s IP address or the MAC address, print a Network Configuration page. • To find a shared network printer (UNC Path), select Shared Printer [UNC] and enter the shared name manually or find a shared printer by clicking the Browse button. NOTE: If you cannot find your machine in network, please turn off the firewall and click Update. For Windows operating system, click Start → Control Panel and start windows firewall, and set this option unactivated. For other operating system, refer to its on-line guide. 6After the installation is finished, a window appears asking you to print a test page and to register yourself as a user of Samsung Printers in order to receive information from Samsung. If you so desire, select the corresponding checkbox(es) and click Finish. Downloaded From ManualsPrinter.com Manuals
Installing Printer Software in Windows 9 Otherwise, just click Finish. NOTE: After setup is complete, if your printer driver doesn’t work properly, reinstall the printer driver. See “Reinstalling Printer Software” on page 11. Custom Installation You can choose individual components to install and set a specific IP address. 1Make sure that the printer is connected to your network and powered on. For details about connecting to the network, see the supplied printer’s User’s Guide. 2Insert the supplied CD-ROM into your CD-ROM drive. The CD-ROM should automatically run, and an installation window appears. If the installation window does not appear, click Start and then Run. Type X:\Setup.exe, replacing “X” with the letter which represents your drive and click OK. If you use Windows Vista, Windows 7 and Windows Server 2008 R2, click Start → All programs → Accessories → Run, and type X:\Setup.exe. If the AutoPlay window appears in Windows Vista, Windows 7 and Windows Server 2008 R2, click Run Setup.exe in Install or run program field, and click Continue in the User Account Control window. 3Click Next. • If necessary, select a language from the drop-down list. • View User’s Guide: Allows you to view the User’s Guide. If your computer doesn’t have Adobe Acrobat, click on this option and it will automatically install Adobe Acrobat Reader for you. 4Select Custom installation. Click Next. 5The list of printers available on the network appears. Select the printer you want to install from the list and then click Next. Downloaded From ManualsPrinter.com Manuals
Installing Printer Software in Windows 10 • If you do not see your printer on the list, click Update to refresh the list, or select Add TCP/IP Port to add your printer to the network. To add the printer to the network, enter the port name and the IP address for the printer. To verify your printer’s IP address or the MAC address, print a Network Configuration page. • To find a shared network printer (UNC Path), select Shared Printer [UNC] and enter the shared name manually or find a shared printer by clicking the Browse button. NOTE: If you cannot find your machine in network, please turn off the firewall and click Update. For Windows operating system, click Start → Control Panel and start windows firewall, and set this option unactivated. For other operating system, refer to its on-line guide. TIP: If you want to set a specific IP address on a specific network printer, click the Set IP Address button. The Set IP Address window appears. Do as follows: a. Select a printer to be set with a specific IP address from the list. b. Configure an IP address, subnet mask, and gateway for the printer manually and click Configure to set the specific IP address for the network printer. c. Click Next. • You can also set the network printer via SyncThruTM Web Service, an embedded web server. Click Launch SWS on Set IP Address window. Your machine’s embedded website opens. 6Select the components to be installed. After selecting the components, the following window appears. You can also change the printer name, set the printer to be shared on the network, set the printer as the default printer, and change the port name of each printer. Click Next. To install this software on a server, select the Setting up this printer on a server checkbox. 7After the installation is finished, a window appears asking you to print a test page and to register yourself as a user of Samsung Printers in order to receive information from Samsung. If you so desire, select the corresponding checkbox(es) and click Finish. Otherwise, just click Finish. NOTE: After setup is complete, if your printer driver doesn’t work properly, reinstall the printer driver. See “Reinstalling Printer Software” on page 11. Downloaded From ManualsPrinter.com Manuals