Samsung Led Tv Series 5 Manual

							164165
Using the Timers
Using the Sleep Timer
System > Time > Sleep Timer  Try Now
This automatically shuts off the TV after a preconfigured period of time. Select  System > Time > Sleep 
Timer. You can set the timer up to 180 minutes in 30-minute increments.
Turning On the TV using  On Timer
System > Time > On Timer  Try Now Timer - On
Set the On Timer so that the TV turns on automatically at a chosen time. Select  System > Time > On 
Timer. The timer configuration window appears. Configure the following settings:
 
"
The On Timer  is only available if the Clock  has been set.
 
●
Setup
Specify the dates and the duration. Use Manual to specify the days of the week.
 
●Time
Set the time that the TV turns on automatically.
 
●Volume
Specify the volume when the TV turns on.
 
●Source
Select the signal source from the list. Specify the channel or source to be displayed when the 
TV turns on. To specify a USB device, a USB device must first be connected to the TV. To play 
media from an HDMI or Component source such as a DVD player or Blu-ray player, the device 
must already be turned on, and playing the media when the TV is turned on. 
						

							166
 
●Aerial
Set the Source  to TV to select a broadcast signal.
 
●Channel
Set the Source  to TV to select a channel.
 
●Music  / Photo
Set the Source  to USB to choose a USB folder that contains music or photo files. Selecting both 
music and image files plays the music files and displays the images at the same time.
Restrictions:
 
●This feature will not function properly if the selected USB device does not contain media files or 
a folder has not been specified.
 
●The slideshow will not start if there is only one image file on the USB device.
 
●Folders with long names cannot be selected.
 
●Always use different folder names for multiple USB devices.
 
●Use a USB memory stick or multi-card reader. The On Timer  may not work with certain battery-
powered USB devices, MP3 players, or PMPs because the TV may take too long to recognise the 
device.
Turning Off the TV Using  Off Timer
System > Time > Off Timer  Try Now Timer - Off
Set the Off Timer to turn the TV off automatically at a specific time. Select  System > Time > Off 
Timer. The timer configuration window appears. Configure the following settings:
 
"
The Off Timer is only available if the Clock   has been set.
 
●
Setup
Specify the dates and the duration. Use Manual to specify the days of the week.
 
●Time
Set the time that the TV turns off automatically. 
						

							166167
Using the Screen Burn Protection and Energy Saving 
Features
Preventing Screen Burn
System > Auto Protection Time  Try Now
Still images can leave burned-in after-images on the screen if left for a long time. Use Screen Burn 
Protection to protect the screen. Select  System > Auto Protection Time  and then choose a time 
setting from the list. If a still image is shown on the screen for longer than the time you selected, the 
TV will automatically activate Screen Burn Protection to prevent burned-in after- images that may 
damage the screen.
Using Energy Saving Features
System >  Eco Solution  Try Now
Eco Solution adjusts the TV's brightness level and prevents overheating to reduce overall power 
consumption.
 
●Energy Saving  Try Now
Select a brightness setting from the list to reduce the TV's power consumption.
 
●Eco Sensor
 
"
Availability depends on the specific model and area.
Automatically adjusts the TV's brightness level based on the ambient light level to reduce the 
TV's power consumption. If the Eco Sensor has adjusted the screen's brightness level, you can 
manually adjust the screen's minimum brightness level by adjusting the Min. Backlight. Changing 
the Picture menu's  Backlight setting while Eco Sensor is running automatically disables  Eco 
Sensor.
 
●No Signal Power Off Try Now
Select a time from the list. If no signal is received for the specified duration, the TV automatically 
cuts off the power to reduce power consumption.
 
●Auto Power Off Try Now
If the TV remains turned on for four hours without any user input, the TV will automatically turn 
off to prevent overheating. 
						

							168
Using Anynet+ (HDMI-CEC)
Use Anynet+ (HDMI-CEC)  to control all external devices that support HDMI-CEC using just the TV's 
remote control. Note that  Anynet+ (HDMI-CEC) only works with the TV's remote control and not with 
the panel keys.
You can configure the TV's universal remote function to control third-party cable boxes, Blu-ray 
players, and home theatres that do not support HDMI-CEC using the TV's remote control.
Anynet+ Requirements:
 
●Anynet+ cannot be used to control external devices that do not support HDMI-CEC.
 
●Anynet+ devices must be connected to the TV using an HDMI cable. Some HDMI cables may not 
support  Anynet+ (HDMI-CEC) . In this case, you will need to replace the HDMI cable.
 
●The TV remote control may not function under certain circumstances. If this occurs select the 
Anynet+ device again.
 
●Anynet+ (HDMI-CEC)  only works with external devices that support HDMI-CEC and only when 
those devices are either in standby mode or turned on.
 
●Anynet+ (HDMI-CEC) can control up to 12 compatible external devices (up to 3 of the same type). 
With home theatre systems, however, the number of systems that can be controlled is limited to 
one.
 
●To listen to 5.1-channel audio from an external device, connect the device to the TV via an HDMI 
cable and the device's digital audio output connector directly to the home theatre system.
 
●A home theatre system that has been connected to the TV using an HDMI cable and an 
optical cable supports 2-channel audio only. 5.1-channel audio is, however, available for digital 
broadcasts with 5.1-channel audio.
Setting Up  Anynet+ (HDMI-CEC)
System > Anynet+ (HDMI-CEC)  Try Now
 
●
Anynet+ (HDMI-CEC)  Try Now
Enables/disables Anynet+ (HDMI-CEC) . Set to Off to disable all Anynet+ related features. Set to 
On  to enable all Anynet+ (HDMI-CEC)  related features.
 
●Auto Turn Off  Try Now
When set to Ye s . turns off Anynet+ (HDMI-CEC)  compatible external devices when the TV is 
turned off.
 
"
Some Anynet+ (HDMI-CEC)  compatible devices do not support this feature.
 
●
Search for Devices  Try Now
Search for Anynet+ (HDMI-CEC)  compatible devices. 
						

							168169
Using Anynet+ (HDMI-CEC)
Selecting an External Device
11 Select  TOOLS . The Tools  list appears.
21 Select Anynet+ (HDMI-CEC)  from the list. The Select Device screen appears.
31 Select a device and wait for the switch to take place. This process may take up to 2 minutes to 
complete and cannot be cancelled once started.
Accessing the External Device's Menu
Once the TV has switched over to the selected device, you can access the device's menu using the 
TV's remote control.
Select TOOLS . The following list appears, though it may differ based on the external device:
 
●Anynet+ (HDMI-CEC)
Displays a list of HDMI-CEC-compliant devices connected to the TV. Select  View TV to exit 
Anynet+ (HDMI-CEC) , and start watching TV. To switch to the screen of an external device, 
simply select that respective device.
 
●(Connected Device) Menu
Display the menu of the connected device. If the target device is a DVD player, the DVD menu is 
shown.
 
●(Connected Device) Tools
Displays a list of frequently-used functions available for the device. If the target device is a DVD 
player, the DVD playback menu is shown.
 
"
Some external devices may not support this option.
 
●
(Connected Device) Title Menu
Display the connected device's title menu. If the target device is a DVD player, the DVD title menu 
is shown.
 
"
Some external devices may not support this option. 
						

							170
Using the e-Manual
Launching the  e-Manual
Support > e-Manual
The embedded e-Manual  contains information.
 
"
You can also download a copy of the e-Manual  from Samsung's website, and read it on your computer or 
print it out.
 
"Yellow words indicate a menu item; white bold words indicate remote control buttons. Arrows are used to 
indicate the menu path. (Example:  Picture > Picture Mode )
11 Select e-Manual. The e-Manual  loads.
21 Select a category from the side of the screen. Once a selection has been made, the contents of 
the selected category appear.
31 Select an item from the list. This opens the e-Manual  on the corresponding page.
If a description doesn't fit on a single screen...
You can scroll pages in one of the following ways.
 
●Position the focus on the page to display  /  on the screen. Press 
  button.
Additional 
e-Manual Features
Loading Pages using Keywords
Select Search from the side of the screen to bring up the search screen. Enter a search term and then 
select Done. Select an item from the search results to load the corresponding page. 
						

							170171
Loading Pages from the Index Page
Select Index from the side of the screen to bring up the index screen. Select a keyword from the list to 
navigate to the relevant page.
Using  History to Load Previously Read Pages
Select  Recent pages from the side of the screen. A list of previously read pages is shown. Select a 
page. The e-Manual jumps to the selected page.
Accessing the Menu from the  e-Manual (Try Now)
Select  (Try Now) on a feature-description to directly move to the corresponding menu and try out 
the feature.
If you want to read an e-Manual entry on a specific screen menu feature,
Using  Samsung Smart Control: press the KEYPAD button and select  e-Manual.
Using the remote control: Press the E-MANUAL button.  
"
Certain menu options cannot be used.
Loading Reference Pages
Select  (Link) from the side of a feature-description page to access the corresponding reference 
page.
Updating the  e-Manual to the Latest Version
You can update the e-Manual in the same way as updating apps.
11 Select the e-Manual item in the SAMSUNG APPS  screen.
21 Press and hold the Enter button. The Options menu appears.
31 From the Options menu on the screen, select Update apps. A pop-up window appears.
 
"
Update apps  is shown on the screen only when an update is required.
41 Select e-Manual in the pop-up window and then select  Update. You can update the e-Manual to 
the latest version. 
						

							172
Updating the Software
Support > Software Update Try Now
Check your TV's software version and upgrade it if necessary.
If the TV is connected to the Internet, TV is set to update software automatically. If you don’t want to 
update it automatically, set  Auto update (Software Update >  Auto update) to Off.
Updating Software over the Internet
Support > Software Update >  Update now Update now - Software
Select  Support >  Software Update >  Update now. An online upgrade downloads and installs the 
upgrade software directly from the Internet.
 
"
This option requires an Internet connection.
 
[DO NOT turn off the TV’s power until the upgrade is complete. The TV will turn off and on 
automatically after completing the software upgrade. All video and audio settings return to the 
default settings after a software upgrade.
Updating Software using a USB connection
Support >  Software Update >  Update now
11 Visit Samsung's website on a computer and download the update package to a USB device.
 
"
Save the update package in the USB device's top-level folder. Otherwise, the TV will not be able to 
locate the update package.
21 Connect the USB device with the update package to the TV.
31 Select  Support >  Software Update >  Update now. The software is updated using the update 
package on the USB device.
 
[DO NOT turn off the TV’s power until the upgrade is complete. The TV will turn off and on 
automatically after completing the software upgrade. All video and audio settings return to the 
default settings after a software upgrade. 
						

							172173
Enabling Automatic Software Updates
Support > Software Update >  Auto update Try Now
If the TV is connected to the Internet, the Auto update  option upgrades the TV’s software while it is in 
Standby Mode. In Standby Mode, the TV appears to be turned off, but still has access to the Internet. 
This allows the TV to upgrade itself automatically while it is not in use.
 
"
This option requires an Internet connection.
Because the TV’s internal processes are operating, the screen may emit a faint glow, and this may 
continue for more than 1 hour until the software download is complete.
If you agree to the Smart Hub  terms and conditions, Auto update will be set to On , If you don't want 
the TV's software updated automatically, set  Auto update (Support > Software Update >  Auto update) 
to  Off.
11 Select  Support >  Software Update >  Auto update.
21 Specify when you want the upgrade to take place. The TV will connect to the server at the 
specified time, download the update package, and upgrade its own software.
Software update via satellite channel
 
"Availability depends on the specific model and area.
Support >  Software Update >  Manage Satellite Channels
(When the Aerial  was set to Satellite ) Manage software downloads via a satellite channel. 
						

							174
Protecting the TV from Hacking and malicious code
System > Smart Security  Try Now
When the TV is connected to the Internet, it is vulnerable to hacks and malicious code.  Smart Security 
protects the TV and storage media connected to the TV from such threats.
Navigate to System >  Smart Security and set Smart Security  to On. 
Try Now
Checking the TV and Connected Storage Media
System >  Smart Security  > Scan
Navigate to System >  Smart Security and select Scan. This scans the TV and connected media for the 
presence of malicious code. If no malicious code is detected, a notification window appears on the 
screen.
If malicious code is detected...
If malicious code was found, the results of the scan will appear on the screen. This result window 
displays all malicious code found, and provides options to either quarantine the code or allow them to 
continue.
11 Select all malicious code to quarantine or allow.
21 Select  Block or Allow. This moves the selected malicious code to the Isolated List or  Allowed 
List.
 
"
The Isolated List displays all blocked malicious code. You can also relocate codes from this list to the 
Allowed List.
 
"The Allowed List displays all allowed malicious code. You can also relocate codes from this list to the 
Isolated List.
Automatically Scanning when the TV is Powered On
System >  Smart Security  > Settings  > Auto Scan
Navigate to System >  Smart Security > Settings  and then set  Auto Scan to On. This automatically 
scans the TV and connected storage media when the TV is powered on.
Automatically Adding malicious code to the Blocked List
System >  Smart Security  > Settings  > Move to Isolated List automatically
Navigate to System >  Smart Security > Settings  and set  Move to Isolated List automatically  to On. 
Malicious code found during the scanning process is automatically added to the Blocked List.