Samsung Led Tv Series 5 Manual

164165
Using the Timers
Using the Sleep Timer
System > Time > Sleep Timer  Try Now
This automatically shuts off the TV after a preconfigured period of time. Select  System > Time > Sleep 
Timer. You can set the timer up to 180 minutes in 30-minute increments.
Turning On the TV using  On Timer
System > Time > On Timer  Try Now Timer - On
Set the On Timer so that the TV turns on automatically at a chosen time. Select  System > Time > On 
Timer. The timer configuration window appears. Configure the...

166
 
●Aerial
Set the Source  to TV to select a broadcast signal.
 
●Channel
Set the Source  to TV to select a channel.
 
●Music  / Photo
Set the Source  to USB to choose a USB folder that contains music or photo files. Selecting both 
music and image files plays the music files and displays the images at the same time.
Restrictions:
 
●This feature will not function properly if the selected USB device does not contain media files or 
a folder has not been specified.
 
●The slideshow will not start if...

166167
Using the Screen Burn Protection and Energy Saving 
Features
Preventing Screen Burn
System > Auto Protection Time  Try Now
Still images can leave burned-in after-images on the screen if left for a long time. Use Screen Burn 
Protection to protect the screen. Select  System > Auto Protection Time  and then choose a time 
setting from the list. If a still image is shown on the screen for longer than the time you selected, the 
TV will automatically activate Screen Burn Protection to prevent...

168
Using Anynet+ (HDMI-CEC)
Use Anynet+ (HDMI-CEC)  to control all external devices that support HDMI-CEC using just the TV's 
remote control. Note that  Anynet+ (HDMI-CEC) only works with the TV's remote control and not with 
the panel keys.
You can configure the TV's universal remote function to control third-party cable boxes, Blu-ray 
players, and home theatres that do not support HDMI-CEC using the TV's remote control.
Anynet+ Requirements:
 
●Anynet+ cannot be used to control...

168169
Using Anynet+ (HDMI-CEC)
Selecting an External Device
11 Select  TOOLS . The Tools  list appears.
21 Select Anynet+ (HDMI-CEC)  from the list. The Select Device screen appears.
31 Select a device and wait for the switch to take place. This process may take up to 2 minutes to 
complete and cannot be cancelled once started.
Accessing the External Device's Menu
Once the TV has switched over to the selected device, you can access the device's menu using the 
TV's remote control.
Select...

170
Using the e-Manual
Launching the  e-Manual
Support > e-Manual
The embedded e-Manual  contains information.
 
"
You can also download a copy of the e-Manual  from Samsung's website, and read it on your computer or 
print it out.
 
"Yellow words indicate a menu item; white bold words indicate remote control buttons. Arrows are used to 
indicate the menu path. (Example:  Picture > Picture Mode )
11 Select e-Manual. The e-Manual  loads.
21 Select a category from the side of the screen. Once a...

170171
Loading Pages from the Index Page
Select Index from the side of the screen to bring up the index screen. Select a keyword from the list to 
navigate to the relevant page.
Using  History to Load Previously Read Pages
Select  Recent pages from the side of the screen. A list of previously read pages is shown. Select a 
page. The e-Manual jumps to the selected page.
Accessing the Menu from the  e-Manual (Try Now)
Select  (Try Now) on a feature-description to directly move to the corresponding menu and...

172
Updating the Software
Support > Software Update Try Now
Check your TV's software version and upgrade it if necessary.
If the TV is connected to the Internet, TV is set to update software automatically. If you don’t want to 
update it automatically, set  Auto update (Software Update >  Auto update) to Off.
Updating Software over the Internet
Support > Software Update >  Update now Update now - Software
Select  Support >  Software Update >  Update now. An online upgrade downloads and installs the...

172173
Enabling Automatic Software Updates
Support > Software Update >  Auto update Try Now
If the TV is connected to the Internet, the Auto update  option upgrades the TV’s software while it is in 
Standby Mode. In Standby Mode, the TV appears to be turned off, but still has access to the Internet. 
This allows the TV to upgrade itself automatically while it is not in use.
 
"
This option requires an Internet connection.
Because the TV’s internal processes are operating, the screen may emit a faint...

174
Protecting the TV from Hacking and malicious code
System > Smart Security  Try Now
When the TV is connected to the Internet, it is vulnerable to hacks and malicious code.  Smart Security 
protects the TV and storage media connected to the TV from such threats.
Navigate to System >  Smart Security and set Smart Security  to On. 
Try Now
Checking the TV and Connected Storage Media
System >  Smart Security  > Scan
Navigate to System >  Smart Security and select Scan. This scans the TV and connected...