Samsung LE 32A456 User Manual

							English - 19
1. Press the MENU button to display the menu.    Press the ENTER button, to select "Picture".
.   Press the ▲ or ▼ button to select “Picture Options”, then 
press the  ENTER button.
.  Select the required option by pressing the ▲ or ▼ button,    then press the ENTER button.
.  When you are satisfied with your setting, press the    ENTER button.
5.
  Press the EXIT button to exit.
 In PC mode, you can only make changes to the   
“Colour Tone” and “Size” from among the items in “Picture 
Options”.
♦ 
  Colour Tone: Cool/Cool1/Normal/Warm1/Warm     You can select the most comfortable colour tone to your eyes.
  The adjusted values are stored according to the selected Picture mode.
“Warm1” or “Warm2” is only activated when the picture mode is "Movie".
♦ 
 Size: Auto Wide/16:9/Wide Zoom/Zoom/:/Just Scan  You can select the picture size which best corresponds to your viewing requirements.
♦  Auto Wide:  
Automatically adjusts the picture size to the "16:9" aspect ratio.♦  16:9:  
Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.♦  Wide Zoom: Magnify the size of the picture more than 4:3.
♦  Zoom:  
Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.♦ ::   
This is the default setting for a video movie or normal broadcasting.♦  Just Scan:  Use the function to see the full image without any cutoff when HDMI (720p/1080i) or 
Component (1080i) signals are input.
"Auto Wide" function is available only in "TV", "DTV", "Ext.1", "Ext.2",\
 "AV", and "S-Video" mode.
In PC Mode, only "16:9" and "4:3" mode can be adjusted.
Settings can be adjusted and stored for each external device you have co\
nnected to an input of 
the TV.
Temporary image retention may occur when viewing a static image on the se\
t for more than two 
hours.
Wide Zoom
:   Move the screen up/down using the ▲ or ▼ button after selecting the  by pressing the ► or ENTER button.
Zoom:   Select  by pressing the ◄ or ►button. 
Use the ▲ or ▼button to move the picture up and down. After selecting ,  
use the ▲ or ▼ button to magnify or reduce the picture size in the vertical directio n.
After selecting “Just Scan” in hDMI (100i) or Component (100i) mode: 
Select  by pressing the ◄ or ►button. Use the ▲, ▼, ◄ or ► button to move the picture .  
Reset:  Press the ◄ or ► button to select “Reset”, then press the  ENTER button.  
You can initialize the setting.
O   You can select these options by simply pressing the  P.SIZE 
button on the remote control.
➣
➣
➣
➣
➣
➣
➣
➣
➣ ➣
Changing the Picture Options
Picture OptionsColour Tone   : Normal Size  : Auto Wide Screen Mode  : 16:9 Digital NR  : Auto DNle  : Off hDMI black Level  : Normal blue Only Mode  : Off 
 Move   Enter Return
TV
PictureMode  : Standard   backlight       7Contrast      95brightness      5Sharpness      50 Colour      50Tint                      G  50      R 50Detailed Settings       Picture Options       Reset : OK   
TV
 Move   Enter Return
BN68-01424D-Eng.indd   192008-03-03   ¿ÀÈÄ 5:21:48 
						

							English - 0
♦  Screen Mode: 16:9/ Wide Zoom/Zoom/:     When setting the picture size to "Auto Wide" in a 16:9 wide TV, you can determine the picture size you want to see the 4:3 WSS (Wide Screen Service) image or nothing. Each individual European 
country requires different picture size so this function is intended for users to select it.
♦ 16:9:   Sets the picture to 16:9 wide mode♦  Wide Zoom: Magnify the size of the picture more than 4:3.
♦  Zoom:  
Magnify the size of the picture vertically on screen.♦ ::   
Sets the picture to 4:3 normal mode.  This function is available in "Auto Wide" mode.   This function is not available in "Component" or "HDMI" mode.
♦   Digital NR: Off/Low/Medium/high/Auto    If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction 
feature to help reduce any static and ghosting that may appear on the screen. 
 When the signal is weak, select one of the other options until the best picture is displayed.
♦  DNIe:  Off/Demo/On     This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you 
can view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the 
applied DNIe and normal pictures on the screen, for demonstration purposes. Using this function, 
you can view the difference in the visual quality.
  DNIe ™
 (Digital Natural Image engine)        This feature brings you more detailed image with 3D noise reduction, detail enhancement,  
contrast enhancement and white enhancement. New image compensation Algorithm gives 
brighter, clearer, more detailed image to you. DNIe ™
 technology will fit every signal into your eyes.
  “DNIe” is only available in “Dynamic” mode.
♦   hDMI  black Level: Normal/Low    You can select the black level on the screen to adjust the screen depth.  This function is active only when the external input connects to HDMI(RGB signals).
♦  blue Only Mode: Off/On    This function is for AV device measurement experts. This function displays the blue signal only by 
removing the red and green signals from the video signal so as to provide a Blue Filter effect that is 
used to adjust the Colour and Tint of video equipment such as DVD players, Home Theaters, etc.
   Using this function, you can adjust the Colour and Tint to preferred values appropriate to the signal level of each video device using the Red/Green/Blue/Cyan/Magenta/Yellow Colour Bar Patterns, 
without using an additional Blue Filter. 
  “Blue Only Mode” is available when the picture mode is set to “Movie” or “Standard”.
BN68-01424D-Eng.indd   202008-03-03   ¿ÀÈÄ 5:21:48 
						

							English - 1
1.   Press the MENU button to display the menu.   
Press the ▲ or ▼ button to select "Sound", then press the 
ENTER
 button.
.    Select the required option by pressing the ▲ or ▼ button, then press the  ENTER button.
.   When you are satisfied with your setting, press the ENTER button.
.   Press the EXIT button to exit.
♦  Mode: Standard/Music/Movie/Speech/Custom   You can select the type of special sound effect to be used when watching a given broadcast.
Easy Setting
1. Press the  TOOLS button on the remote control.
. Press the ▲ or ▼ button to select "Sound Mode".. Press the ◄ or ► button to select the desired sound mode.. Press the  EXIT or TOOLS button to exit.
♦ Equalizer: Balance/100Hz/300Hz/1kHz/3kHz/10kHz   The sound settings can be adjusted to suit your personal preferences.
If you make any changes to these settings, the sound 
mode is automatically switched to "Custom".
♦  SRS  TS XT: Off/On   TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience 
through any two-speaker playback system, including internal television speakers. It is fully 
compatible with all multichannel formats.
Easy Setting
1.
   Press the TOOLS  button on the remote control..  
Press the ▲ or ▼ button to select "SRS TS XT"..  
Press the ◄ or ► button to select the "Off" or "On".. Press the  EXIT or TOOLS button to exit.
TruSurround XT, SRS and  Symbol are trademarks of SRS Labs, Inc.TruSurround XT technology is incorporated under license from 
SRS Labs, Inc.
➣
Sound Features
Equalizer
balance   100hz   00hz  1khz    khz   10khz
 Move    Adjust Return
TV
R
L
SoundMode  : Custom   Equalizer      SRS TS XT  : Off   Auto Volume  : Off   TV Speaker  : On   
 Move    Enter Return
TV
Anynet+ (hDMI-CEC)Picture Mode    : StandardSound Mode  : CustomSleep Timer   : OffSRS TS XT  ◄ Off         ►Energy Saving    : OffDual l-ll  : Mono
 Move    Adjust Exit
Tools
Anynet+ (hDMI-CEC)Picture Mode   :  StandardSound Mode  ◄ Custom  ►Sleep Timer   :   OffSRS TS XT   :   OffEnergy Saving    : OffDual l-ll   :  Mono
Tools
 Move    Adjust Exit
BN68-01424D-Eng.indd   212008-03-03   ¿ÀÈÄ 5:21:49 
						

							English - 
You can connect a set of headphones to your set if you wish to 
watch a TV programme without disturbing the other people in the 
room.When you insert the head set jack into the corresponding port, you 
can operate only "Auto Volume" in Sound menu.
Prolonged use of headphones at a high volume may damage your 
hearing.
You will not receive sound from the speakers when you connect headphones \
to the system.
The headphone volume and TV volume  are adjusted differently.
➣
➣
➣
➣
Connecting headphones (Sold separately)
TV Side Panel
You can set the sound mode in the "Tools" menu.  
When you set to "Dual I-II", the current sound mode is 
displayed on the screen.
1.
  Press the TOOLS  button on the remote control.. Press the ▲ or ▼ button to select “Dual I-II".. Press the ◄ or ► button to select required option.. Press the ENTER button.
Audio Type Dual 1/2Default
A2 
Stereo Mono
MONO
Automatic 
change
Stereo STEREO
 ↔ MONO
Dual DUAL 1 ↔ DUAL 2DUAL 1
NICAM  Stereo Mono
MONO
Automatic 
change
Stereo MONO
 ↔ STEREO
Dual MONO ↔ DUAL 1 DUAL 2DUAL 1
 
   If the stereo signal is weak and an automatic switching occurs, 
then switch to the Mono.
    This function is only activated in stereo sound signal. It is 
deactivated in mono sound signal.
    This function is only available in Analogue TV mode.
Selecting the Sound Mode
Anynet+ (hDMI-CEC)Picture Mode    : StandardSound Mode  : CustomSleep Timer   : OffSRS TS XT   : OffEnergy Saving    : OffDual l-ll ◄ Mono       ►
 Move    Adjust Exit
Tools
♦ Auto Volume:  Off/On   Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the 
desired channel by lowering the sound output when the modulation signal is high or by raising the 
sound output when the modulation signal is low.
♦ TV Speaker: Off/On If you want to hear the sound through separate speakers, cancel the internal amplifier.
The   +,  - and MUTE buttons do not operate when the " TV Speaker" is set to "Off".
When "TV Speaker" is set to "Off", the Sound menus cannot be adjusted.
Manufactured under license from Dolby Laboratories. Dolby and the  
double-D symbol are trademarks of Dolby Laboratories.
➣
➣
BN68-01424D-Eng.indd   222008-03-03   ¿ÀÈÄ 5:21:50 
						

							English - 
You can select a time period of between 0 and 10 minutes after which the television automatically switches to standby 
mode.
1.
 Press the MENU button to display the menu.    Press the ▲ or ▼ button to select "Setup", then press the    ENTER button.
. Press the ▲ or ▼ button to select "Time", then press the    ENTER button.
. Press the ▲ or ▼ button to select "Sleep Timer", then press    the ENTER button.
. Press the ▲ or ▼ button repeatedly until the desired time    appears (Off, 30, 60, 90, 120, 150, 180).   Press the ENTER button.
5.
  Press the EXIT button to exit.
  The TV automatically switches to standby mode when the    timer reaches 0. 
Setting the Sleep Timer
TV
SetupPlug & Play   Language : English Time  Melody : Off Entertainment : Off Energy Saving : Off 
 Move   Enter Return
TimeClock Set  : 00 : 00Sleep Timer :Timer 1 :Timer  : Timer  : 
 Move   Enter Return
TV
Off060
90
1015010
You can set the TV’s clock so that the current time is   
displayed when you press the INFO button. You must also set 
the time if you wish to use the automatic On/Off timers.
1.
  Press the MENU button to display the menu.    Press the ▲ or ▼ button to select "Setup", then press the    ENTER button.
. Press the ▲ or ▼ button to select "Time", then press the    ENTER button.
. Press the ENTER button to select "Clock Set".
. To... Press the...
Move to  "Month", "Day", "Year", "Hour" or 
"Minute" ◄ or ► button.
Set the  "Month", "Day", "Year", "Hour" or 
"Minute" ▲ or 
▼ button.
Confirm the setting
ENTER button.
5.   Press the  EXIT button to exit.
  If you disconnect the power cord, you have to set the clock again.  You can also set "Year", "Month", "Day", "Hour" and "Minute"  by pressing the number buttons on 
the remote control.
Setting and Displaying the Current Time
TV SetupPlug & Play   Language 
: English Time  Melody : Off Entertainment : Off Energy Saving : Off 
 Move   Enter Return
TV Clock SetMonth
01
Dayp
q0100
Year
00hour00Minute
 Move  
 Adjust Return
Anynet+ (hDMI-CEC)Picture Mode    : StandardSound Mode  : CustomSleep Timer  ◄ Off         ►SRS TS XT   : OffEnergy Saving    : OffDual l-ll  : Mono
 Move    Adjust Exit
ToolsEasy Setting
1.
 Press the TOOLS  button on the remote control.
.   Press the ▲ or ▼ button to select “Sleep Timer”.
.   Press the ◄ or ► button to select the minute.
. Press the EXIT or  TOOLS button to exit.
BN68-01424D-Eng.indd   232008-03-03   ¿ÀÈÄ 5:21:51 
						

							English - 
When you start using your set for the first time, you must 
select the language which will be used for displaying menus 
and indications.
1.
 Press the MENU button to display the on-screen menu.   Press the ▲ or ▼ button to select "Setup", then press the    ENTER button.
. Press the ▲ or ▼ button to select "Language", then press    the ENTER button.
. Select a particular language by pressing the ▲ or ▼ button    repeatedly.  Press the ENTER button.
. Press the EXIT button to exit.
Choosing Your Language
TV SetupPlug & Play   Language 
: English Time  Melody : Off Entertainment : Off Energy Saving : Off 
 Move   Enter Return
1. Press the MENU button to display the menu.    Press the ▲ or ▼ button to select "Setup", then press the    ENTER button.
. Press the ▲ or ▼ button to select "Time", then press the    ENTER button.
.   Press the ▲ or ▼ button to select "Timer 1", "Timer 2", 
"Timer 3", then press the  ENTER
 button. 
Three different On/Off Timer Settings can be made.
You must set the clock first.
.   Press the ◄ or ► button to select the required item below.Press the ▲ or ▼ button to adjust to the setting satisfied.
♦  On  Time:   Select hour, minute, and "On"/"Off". (To activate 
timer with the setting satisfied, set to " On".)
♦  Off  Time:  
Select hour, minute, and "On"/"Off". (To activate 
timer with the setting satisfied, set to " On".)
♦  Repeat:  
Select "Once", "Everyday", "Mon~Fri", "Mon~Sat", or "Sat~Sun".
♦  Volume:  Select the desired turn on volume level. 
     You can set the hour and minute directly by pressing the number buttons on the remote control.
   
Auto Power Off 
When you set the timer On, the TV will eventually turn off, if no controls are operated for 3 hours 
after the TV was turned on by timer. This function is only available in timer On mode and prevents 
overheating, which may occur if a TV is on for too long time.
➣
Switching the Television On and Off Automatically
TV SetupPlug & Play   Language 
: English Time  Melody : Off Entertainment : Off Energy Saving : Off 
 Move   Enter Return
TV Timer 1On Time
Repeat
OnceVolume10
0000Off:Off Time0000Off:
 ► Move    Adjust Return
6 5
BN68-01424D-Eng.indd   242008-03-03   ¿ÀÈÄ 5:21:52 
						

							English - 5
Melody / Entertainment / Energy Saving 
1. Press the MENU button to display the menu.      Press the ▲ or ▼ button to select "Setup", then press the    ENTER button.
.   Select the required option by pressing the ▲ or ▼ button, then press the  ENTER button.
.   When you are satisfied with your setting, press the  
ENTER
 button.
.    Press the EXIT button to exit.
♦   Melody: Off/Low/Medium/high   The TV power on/off melody sound can be adjusted.
The Melody does not play  
- When no sound is output from the TV because the  MUTE button has been pressed. 
- When no sound is output from the TV because the 
 (Volume) button has been pressed.  
- When the TV is turned off by Sleep Timer function.
♦    Entertainment: Off/Sports/Cinema/Game     The “Entertainment” mode enables you to select the optimal display and sound for sports, cinema and games.
  - Off: Switch the "Entertainment" function off.
 - Sports:  
Provides the optimal picture and sound quality for sports. You can enjoy more thrilling Colour and sound.
  - Cinema:  
Provides the optimal picture and sound quality for cinema. You can experience a richer picture and enhanced sound.
  - Game:  
Provides the optimal picture and sound quality for games. This mode accelerates the playing speed when using an external game console connected to the TV.  
If you set any of the three “Entertainment” modes to On, the settings will be locked  and can not 
be adjusted. If you want to make Picture and Sound mode adjustments, the “Entert ainment” 
mode must be turned off.
The “Entertainment” settings are saved for each input source.
If you set any of the three “Entertainment” modes to On, “SRS TS XT ” function is not available.
O  You can press the  E.MODE button on the remote control 
repeatedly to change the “Entertainment” setting.
➣
➣
➣
➣
TV SetupPlug & Play   Language : English Time  Melody : Off Entertainment : Off Energy Saving : Off 
 Move   Enter Return
BN68-01424D-Eng.indd   252008-03-03   ¿ÀÈÄ 5:21:53 
						

							English - 6
♦   Energy Saving:  Off/Low/Medium/high/Auto  
This feature adjusts the screen brightness depending on the surrounding lighting conditions. − Off: Turns off the energy saving function. − Low : Sets the TV to low energy saving mode. − Medium: Sets the TV to medium energy saving mode.  − high: Sets the TV to high energy saving mode.   − Auto:  
Automatically adjusts the brightness of the TV screen in accordance with the scenes. 
Easy Setting
1.   Press the  TOOLS button on the remote control.
.    Press the ▲ or ▼ button to select “Energy Saving”.
.   Press the ◄ or ► button to select the "Off","Low", 
"Medium", "High" or "Auto".
.  Press the  EXIT or TOOLS button to exit.   This function is not available in "PC" mode. (40 inch)
Anynet+ (hDMI-CEC)Picture Mode    : StandardSound Mode  : CustomSleep Timer   : OffSRS TS XT   : OffEnergy Saving  ◄ Off         ►Dual l-ll   : Mono
 Move    Adjust Exit
Tools
You can select among external sources connected to your 
TV’s input jacks.
1.
 Press the MENU button to display the menu.   Press the ▲ or ▼ button to select "Input", then press the    ENTER button.
. Press the ENTER button again, to select "Source List".     Available signal sources:  TV, Ext.1, Ext.2, AV, S-Video, 
Component, PC, HDMI1, HDMI2, HDMI3, DTV.
     You can choose only those external devices that are 
connected to the TV.
.  Select the required device by pressing the ▲ or ▼ button.    Press the ENTER button.
O
     Press the SOURCE button on the remote control to toggle 
between all the available source. 
TV mode can be selected by pressing the  TV/DTV button, 
number buttons(0~9), and the  P
/ button on the remote 
control. 
O
    You can also watch HDMI mode simply by pressing the hDMI 
button on the remote control. 
Selecting the Source
TV InputSource List 
: TV   Edit Name      Anynet+(hDMI-CEC)       
 Move   Enter Return
TV Source ListTV 
    Ext.1  : ----Ext.  : ----AV  : ----S-Video  : ----Component  : ----PC  : ----hDMI1  : ----hDMI  : ----hDMI  : ----DTV 
 Move    Enter Return
BN68-01424D-Eng.indd   262008-03-03   ¿ÀÈÄ 5:21:54 
						

							English - 7
Name the device connected to the input jacks to make your 
input source selection easier.
1.
 Press the MENU button to display the menu.    Press the ▲ or ▼ button to select "Input", then press the    ENTER button.
. Press the ▲ or ▼ button to select "Edit Name", then press    the ENTER button.
. Press the ▲ or ▼ button to select the device that you wish to    edit.   Press the ENTER button.   . Press the ▲ or ▼ button to select the required device.   Press the ENTER button. 
5.
  Press the EXIT button to exit.
Editing the Input Source Names
TV InputSource List 
: TV   Edit Name      Anynet+(hDMI-CEC)       
 Move   Enter Return
TV Edit NameExt.1 
: ----Ext.  : ----AV  : ----S-Video  : ----Component  : ----PC  : ----hDMI1  : ----hDMI  : ----hDMI  : ----
 Move    Enter Return
----VCR
DVD
Cable STbSatellite STbPVR STbAV Receiver
Game
q
BN68-01424D-Eng.indd   272008-03-03   ¿ÀÈÄ 5:21:55 
						

							English - 
♦  
The company does not guarantee the normal operation of the DTV menu for countries other than the supported countries 
(France, Germany, Italy, Netherlands, Spain, Switzerland, United 
Kingdom, Austria) because only these country standards are 
supported.  
In addition, when the country of the broadcast stream differs from 
the country selected by the current user, the string appearing in 
the channel banner, Info, Guide, Channel Manager, etc. may not 
be displayed properly.
♦
     Available in DTV mode. Preset to the DTV mode by using the TV/DTV button on your remote control. To help you navigate 
around the on-screen menu system and adjust the various 
settings available, refer to the following illustration.
Press the  MENU button to display the menu. 
Press the ▲ or ▼ button to select "Digital Menu", then press the 
ENTER
 button.
The sub-items of the CI Menu may vary depending on the CAM model.➣
Language
Audio Language  
Subtitle Language  
Teletext Language  
Preference
Now/Next, Full Guide
Guide
Now & Next Guide 
Full Guide 
Scheduled List 
Default Guide
Channel
Country 
Auto Store 
Manual Store 
Edit Favourite Channels  
Channel List
Setup
Menu Transparency  
Change PIN 
Parental Lock 
Subtitle 
Subtitle Mode 
Audio Format 
Audio Description  
 
Digital Text 
Time Zone 
Common Interface 
System
Product Information 
Signal Information  
Software Upgrade  
Reset High, Medium, Low, Opaque
Off, On
Normal, Hard of hearing
Primary Audio Language  
Secondary Audio Language  
Primary Subtitle Language  
Secondary Subtitle Language  
Primary Teletext Language  
Secondary Teletext Language  (depending on the country)
Disable, Enable
PCM, Dolby Digital
All, Favourites, Default
Previewing the DTV Menu System
Audio Description  Off, On 
Volume
Application Info, CI Menu
GuideNow & Next Guide     Full Guide           Scheduled List       Default Guide  : Full Guide  
 Move    Enter Return
DTV
ChannelCountry   :United Kingdom Auto Store       Manual Store       Edit Favourite Channels   Channel List       
 Move   Enter Return
DTV
SetupMenu Transparency :  Medium   Change PIN       Parental Lock       Subtitle   : Off   Subtitle  Mode       

 Move    Enter Return
DTV
LanguageAudio Language       Subtitle Language     Teletext Language     Preference       
 Move   Enter Return
DTV
TV
Guide
Digital Channel
Setup
Language
 Move    Enter Return
Digital Menu
BN68-01424D-Eng.indd   282008-03-03   ¿ÀÈÄ 5:21:56