Samsung LE 32A456 User Manual

							English - 9
You can use the TOOLS button to select your frequently used 
functions quickly and easily. The “Tools” menu change depending on 
which external input mode you are viewing.
1.
	 	Press the  TOOLS button. 
The “Tools” menu will appear.
.	 	Press the ▲ or ▼ button to select a menu.
.		Press the ▲/▼/◄/►/ ENTER buttons to display, change, or 
use the selected items. For a more detailed description of each 
function, refer to the corresponding page.
• Anynet+ (HDMI-CEC), see page 47
• Picture Mode, see page 16
• Sound Mode, see page 21
• Sleep Timer, see page 23
• SRS TS XT, see page 21
• Energy Saving, see page 26
• Dual l-ll, see page 22
• Auto Adjustment, see page 45  
1.	 	With the power on, press the  MENU button. The main menu appears on the screen. The menu’ s left side 
has icons: Picture, Sound, Channel, Setup, Input, Digital Menu.
.	Press the ▲ or ▼ button to select one of the icons.       Then press the ENTER button to access the icon’s sub-
menu.
.	 Press the  EXIT button to exit.
  The on-screen menus disappear from the screen after about 
one minute. 
Viewing the Menus
Using the TOOLS button
PictureMode  : Standard   backlight       7Contrast      95brightness      5Sharpness      50 Colour      50Tint                      G  50      R 50Detailed Settings       Picture Options       Reset : OK   
TV
 Move   Enter Return
Anynet+ (hDMI-CEC)Picture Mode  : StandardSound Mode : CustomSleep Timer : OffSRS TS XT : OffEnergy Saving : OffDual l-ll : Mono
 Move   Enter Exit
Tools
BN68-01424D-Eng.indd   92008-03-03   ¿ÀÈÄ 5:21:40 
						

							English - 10
When the TV is initially powered on, several basic settings  
proceed automatically and subsequently. The following   
settings are available.
      Any functions related to Digital TV (DVB) will only work in countries or areas where DVB-T (MPEG2) digital terrestrial 
signals are broadcasted. Please confirm with your local 
dealer if you can receive DVB-T signals. Although this TV set 
follows the DVB-T specification, maintaining compatibility with 
the future coming DVB-T digital terrestrial broadcasts is not 
guaranteed. Several functions may not be available in some countries.
1.
  Press the POWER button on the remote control.   The message "Start Plug & Play." is displayed with "OK" selected.
. Select the appropriate language by pressing the ▲ or ▼ button.   Press the ENTER button to confirm your choice.
. Press the ◄ or ► button to select “ Store Demo” or “Home Use”, then the  ENTER button.     We recommend setting the TV to "Home Use" mode for the best picture in your home 
environment.
    "Store Demo" mode is only intended for use in retail environments.      If the unit is accidentally set to “Store Demo” mode and you want to return to “Home Use” (Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and 
hold the  MENU button on the TV for 5 seconds
. The message "Check antenna input." is displayed with "OK" selected.   Press the ENTER button.    Please check that the antenna cable is connected correctly.
5.  Select the appropriate country by pressing the ▲ or ▼ button.   Press the ENTER button to confirm your choice.
6.
    The message “Some DTV functions may not be available. Digital Scan?” is displayed.  
Press the ◄ or ► button to select “Yes” or “No”, then press the  ENTER button.
 Yes:  First an  Analogue TV  search is performed and then a  Digital TV ch. auto search is per-
formed.

 No: Only an  Analogue TV  search is performed.
    This function is supported for all countries except for the following countries: France, Germany, Italy, Netherlands, Spain, Switzerland, United Kingdom, Austria.
7.
 The "Auto Store" menu is displayed with the "Start" selected. Press the ENTER button.     The channel search will start and end automatically.     The DTV channel scan menu appears and the DTV channel is automatically updated.   If the DTV channel is updated, the Source in the source list of the Input menu is automatically      changed to DTV.    After all the available channels are stored, the "Clock Set" menu appears.      Press the ENTER button at any time to interrupt the memorization process.     For detailed descriptions about DTV channel update, refer to page  29 of this manual.    After all the available digital channels are stored, the screen to select a time zone is displayed    depending on the country.
. Press the ENTER button.   Select the "Month", "Day", "Year", "Hour", or "Min" by pressing the ◄ or ► button.    Set the "Month", "Day", "Year", "Hour", or "Min" by pressing the ▲ or ▼ button.       You can also set the “Month”, “Day”, “Year”, “Hour” and "Min" by pressing the number buttons on 
the remote control.
Plug & Play
Plug & Play
Start Plug & Play.
 Enter
OK
BN68-01424D-Eng.indd   102008-03-03   ¿ÀÈÄ 5:21:40 
						

							English - 11
9.   Press the ENTER button to confirm your setting. The message “Enjoy your viewing” is displayed. 
When you have finished, press the  ENTER button.    Even if the ENTER button is not pressed, the message will automatically disappear after 
several seconds.
 Language: Select your language.   Country: Select your country.   Auto Store:  
Automatically scans for and stores channels available in the local area. Clock Set: Sets the current time for the TV clock.
If you want to reset this feature...
1.
  Press the MENU button to display the menu.     Press the ▲ or ▼ button to select "Setup" then press the    ENTER button.
.   Press the ENTER button again, to select "Plug & Play".  
For further details on setting up options, refer to the page 10.
 The “Plug & Play” feature is only available in the TV mode.➣
You can scan for the frequency ranges available to you (and 
availability depends on your country).   
Automatically allocated programme numbers may not correspond 
to actual or desired programme numbers.  however, you can sort numbers manually and clear any channels you do not wish to 
watch.
1. Press the MENU button to display the menu.      Press the ▲ or ▼ button to select " Channel", then press the 
ENTER
 button.
.  Press the ENTER button to select "Country".
. Select the appropriate country by pressing the ▲ or ▼ button.   Press the ENTER button to confirm your choice.
Even though you have changed the country setting in this menu, the count\
ry setting for DTV is 
not changed. (Refer to page  29)
. Press the ▲ or ▼ button to select "Auto Store", then press the  ENTER button.
5.
  Press the ENTER button.
The TV will begin memorizing all of the available channels.
Press the ENTER
 button at any time to interrupt the memorization process and return to t\
he  "Channel " menu.
6.
  After all the available channels are stored, the "Sort" menu appears. (refer to page 14)
➣
➣
➣
Storing Channels Automatically
TV SetupPlug & Play   Language 
: English Time  Melody : Off Entertainment : Off Energy Saving : Off 
 Move   Enter Return
TV ChannelCountry 
: United Kingdom  Auto Store       Manual Store      Channel Manager      Sort      Name      Fine Tune      LNA  : Off  
 Move   Enter Return
BN68-01424D-Eng.indd   112008-03-03   ¿ÀÈÄ 5:21:41 
						

							English - 1
Storing Channels Manually
 Not available in DTV or external input mode.
You can store television channels, including those received 
via cable networks.  
When storing channels manually, you can choose:  
♦ Whether or not to store each of the channels found.  
♦
    The programme number of each stored channel which you wish to identify.
1.
    Press the MENU button to display the menu.    
Press the ▲ or ▼ button to select "Channel", then press the 
ENTER
 button.
.    Press the ▲ or ▼ button to select "Manual Store", then press the  ENTER button.
.   Select the required option by pressing the ▲ or ▼ button, then press the  ENTER button.
.   When you are satisfied with your setting, press the  
ENTER
 button.
5.
 Press the  EXIT button to exit.
♦		Programme  (Programme number to be assigned to a channel)  
− Press the ▲ or ▼ button until you find the correct number.  
 You can also select the channel number directly by pressing the numeric buttons (0~9).
♦	
 
Colour System: Auto/PAL/SECAM/NTSC. 
− Press the ▲ or ▼ button to select the required colour standard.
♦	
 
Sound System:  bG/DK/I/L 
− Press the ▲ or ▼ button to select the required sound standard.
♦
	 	Channel  (When you know the number of the channel to be stored) 
− Press the ▲ or ▼ button to select  C (Air channel) or S (Cable channel).  
− Press the ► button, then press the ▲ or ▼ button to select the required number.  
 You can also select the channel number directly by pressing the numeric buttons (0~9).   If there is abnormal sound or no sound, re-select the sound standard required.
♦
	 	Search  (When you do not know the channel numbers)  
− Press the ▲ or ▼ button to start the search. 
−   
The tuner scans the frequency range until the first channel or the channel that you selected is received on the screen.
♦	
 
Store (When you store the channel and associated programme number) 
− Set to "OK" by pressing the  ENTER
 button.
 Channel mode−   	P (Programme mode): When completing tuning, the broadcasting stations in your area have been 
assigned to position numbers from P00 to P99. You can select a channel by entering the position 
number in this mode.
−  	C (Air channel mode): You can select a channel by entering the assigned number to each air 
broadcasting station in this mode.
−  	S (Cable channel mode): You can select a channel by entering the assigned number for each 
cable channel in this mode.
ChannelCountry  : United Kingdom  Auto Store       Manual Store      Channel Manager      Sort      Name      Fine Tune      LNA  : Off  
 Move   Enter Return
TV
Manual StoreProgramme   : P 1Colour System  : Auto   Sound System  : bG   Channel  : S 6Search  : 10 MhzStore  : ?
 Move   Enter Return
TV
BN68-01424D-Eng.indd   122008-03-03   ¿ÀÈÄ 5:21:42 
						

							English - 1
Not available in DTV or external input mode.
Using the Channel Manager, you can conveniently lock or add 
channels.
1.
  Press the MENU button to display the menu.       Press the ▲ or ▼ button to select " Channel", then press the 
ENTER
 button.
.  Press the ▲ or ▼ button to select "Channel Manager",    then press the ENTER button.
♦    Adding channels  Using the Channel List, you can add channels.
. Select "Channel List" by pressing the  ENTER button.
.   Move to the () field by pressing the ▲, ▼, ◄ or ►  
button, select a channel to be added, and press the   
ENTER
 button to add the channel.
If you press the ENTER
 button again, the () symbol 
next to the channel disappears and the channel is not 
added.
"
" is active when "Child Lock" is selected to "On".
♦     Locking channels    This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmes by muting 
out video and audio.
5.
  Press the ▲ or ▼ button to select "Child Lock", then press    the ENTER button.
6.
    Select "On" by pressing the ▲ or ▼ button, then press the ENTER button.
7.
  Press the ▲ or ▼ button to select "Channel List",    then press the ENTER button.
.   Move to the "" field by pressing the ▲, ▼, ◄ or ► button, 
select a channel to be locked, and press the  ENTER
   
button.
If you press the ENTER
 button again, the () symbol 
next to the channel disappears and the channel lock is 
cancelled.
A blue screen is displayed when "Child Lock" is activated.
9.
  Press the EXIT button to exit.
 Select "On" or "Off" in "Child Lock" to easily turn the 
channels which selected on  "" to be active or inactive. 
   You can select these options by simply pressing the Ch LIST  button on the remote control.
➣
➣
➣
➣
➣
➣
Adding / Locking Channels
P   1   C
Channel List
Move               Enter
Page              Return
Add            Lock
1 / 10
Prog.
0    C--
1    C    bbC 1   C7   C755   C766   S7   S   S6
9   S7
ChannelCountry  : United Kingdom  Auto Store       Manual Store      Channel Manager      Sort      Name      Fine Tune      LNA  : Off  
 Move   Enter Return
TV
TV Channel ManagerChannel List     
 Child Lock : Off   
 Move   Enter Return
BN68-01424D-Eng.indd   132008-03-03   ¿ÀÈÄ 5:21:43 
						

							English - 1
This operation allows you to change the programme numbers 
of the stored channels. 
This operation may be necessary after using the auto store.Not available in DTV or external input mode.
1.
    Press the MENU button to display the menu.    
Press the ▲ or ▼ button to select " Channel", then press the 
ENTER
 button.
.  Press the ▲ or ▼ button to select "Sort", then press the    ENTER button.
.   Select the channel number that you wish to change by pressing the ▲ or ▼ button repeatedly.   
Press the  ENTER
 button.
The selected channel number and name are moved to 
right side.
.    Press the ▲ or ▼ button to move to the position in which you 
would like to change and then press the  ENTER
 button.
The selected channel is exchanged with the one 
previously stored to the chosen number.
5.
  Repeat steps  to  for another channel to be sorted.
6.
  Press the EXIT button to exit.
➣
➣
➣
Sorting the Stored Channels
Assigning Channels Names
Channel names will be assigned automatically when channel  
information is broadcast. These names can be changed,   
allowing you to assign new names.
Not available in DTV or external input mode.
1.
  Press the MENU button to display the menu.       Press the ▲ or ▼ button to select " Channel", then press the 
ENTER
 button.
.  Press the ▲ or ▼ button to select "Name", then press the    ENTER button.
. If necessary, select the channel to be assigned to a new    name by pressing the ▲ or ▼ button. Press the  ENTER   button.The selection bar is displayed around the name box.
.  
 
The following characters are available: Letters of the alphabet (A~Z) \
/ Numbers 
(0~9) / Special characters (+, -, *, /, space)
5.
  Repeat steps  to  for each channel to be assigned to a new name.
6.
  Press the EXIT button to exit.
➣
➣
➣
To...
Select a letter, number or symbol
Move on the next letter
Move back the previous letter
Confirm the name
Then...
Press the ▲ or ▼ button
Press the ► button
Press the ◄ button
Press the  ENTER
 button
ChannelCountry  : United Kingdom  Auto Store       Manual Store      Channel Manager      Sort      Name      Fine Tune      LNA  : Off  
TV
 Move   Enter Return
SortProg.  Ch. Name      0  C-- ----- 1  C  -----     S06 -----    S07 -----    S09 ----- 5  S1  ----- 6  S1  ----- 7  S1  -----    S17 ----- 9  C1  -----    
TV
 Move    Enter Return
ChannelCountry  : United Kingdom  Auto Store       Manual Store      Channel Manager      Sort      Name      Fine Tune      LNA  : Off  
 Move   Enter Return
TV
Name
 Move   Enter Return
Prog.  Ch. Name      0  C-- ----- 1  C  -----     S06 -----    S07 -----    S09 ----- 5  S1  ----- 6  S1  ----- 7  S1  -----    S17 ----- 9  C1  -----    
TV
BN68-01424D-Eng.indd   142008-03-03   ¿ÀÈÄ 5:21:44 
						

							English - 15
Use fine tuning to manually adjust a particular channel for 
optimal reception.Not available in DTV or external input mode.
1.
  Use the number buttons to directly select the channel that    you want to fine tune.
. Press the MENU button to display the menu.      Press the ▲ or ▼ button to select " Channel", then press the 
ENTER button.
.  Press the ▲ or ▼ button to select "Fine Tune", then press    the ENTER button.
. Press the ◄ or ► button to adjust the fine tuning.    Press the ENTER button.
5.
  Press the EXIT button to exit.
Fine tuned channels that have been saved are marked 
with an asterisk "
*" on the right-hand side of the channel 
number in the channel banner.  And the channel number 
turns red.
To reset the fine-tuning, select "Reset" by pressing the   
▲ or ▼ button and then press the ENTER button.
➣
➣
➣
Fine Tuning Channel Reception
ChannelCountry  : United Kingdom  Auto Store       Manual Store      Channel Manager      Sort      Name      Fine Tune      LNA  : Off  
TV
 Move   Enter Return
Fine Tune
P 1
0
Reset
 Adjust    Save Return
If the TV is operating in a weak-signal area, the LNA function 
can improve the reception (a low-noise preamplifier boosts 
the incoming signal).
Not available in DTV or external input mode.
1.
  Press the MENU button to display the menu.      Press the ▲ or ▼ button to select " Channel", then press the 
ENTER
 button.
.  Press the ▲ or ▼ button to select "LNA", then press the    ENTER button.
. Press the ▲ or ▼ button to select  "Off" or "On".   Press the ENTER button.
. Press the EXIT button to exit.
➣
LNA (Low Noise Amplifier)
ChannelCountry  : United Kingdom  Auto Store       Manual Store      Channel Manager      Sort      Name      Fine Tune      LNA  : Off  
TV
 Move   Enter Return
ChannelCountry  : United Kingdom  Auto Store       Manual Store      Channel Manager      Sort      Name     Fine Tune     LNA  : Off  
TV
 Move   Enter Return
Off
On
BN68-01424D-Eng.indd   152008-03-03   ¿ÀÈÄ 5:21:45 
						

							English - 16
You can select the type of picture which best corresponds to 
your viewing requirements.
1.
 Press the MENU button to display the menu.    Press the ENTER button, to select "Picture".
. Press the ENTER button again, to select "Mode".
. Press the ▲ or ▼ button to select the desired picture effect.    Press the ENTER button.
. Press the EXIT button to exit.
♦ Dynamic:   Selects the picture for high-definition in a bright    
room.
♦  Standard:
  
Selects the picture for optimum display in a normal environment.
♦  Movie:
  
Selects the picture for comfortable display in a dark room.
  The Picture mode must be adjusted separately for each 
input source.
Changing the Picture Standard
PictureMode  : Standard   backlight       7Contrast      95brightness      5Sharpness      50 Colour      50Tint                      G  50      R 50Detailed Settings       Picture Options       Reset : OK   
TV
 Move   Enter Return
PictureMode  : Standard   backlight       7Contrast      95brightness      5Sharpness      50 Colour      50Tint                      G  50      R 50Detailed Settings       Picture Options        Reset : OK    
TV
 Move   Enter Return
Dynamic
Standard Movie
Easy Setting
1.
   Press the TOOLS  button on the remote control.
.   Press the ▲ or ▼ button to select "Picture Mode".
.   Press the ◄ or ► button to select the required option.
.   Press the EXIT or  TOOLS button to exit. 
Anynet+ (hDMI-CEC)Picture Mode  ◄ Standard  ►Sound Mode   :  CustomSleep Timer   :   OffSRS TS XT   :   OffEnergy Saving    : OffDual l-ll   :  Mono
Tools
 Move    Adjust Exit
BN68-01424D-Eng.indd   162008-03-03   ¿ÀÈÄ 5:21:46 
						

							English - 17
Your set has several settings which allow you to control 
picture quality.
1.
 To select the desired picture effect, follow the      "Changing the Picture Standard" instructions number 1 to 3. (On page  16)
.   Press the ▲ or ▼ button to select a particular item. Press the 
ENTER
 button.
.    Press the ◄ or ► button to decrease or increase the value of 
a particular item. Press the  ENTER
 button.
. Press the EXIT button to exit.
♦ backlight:   Adjusts the screen brightness by adjusting the LCD backlight brightness. (0~10)
♦  Contrast:  
Adjusts the lightness and darkness between objects and the background.
♦ brightness: Adjusts the brightness of the whole screen.
♦  Sharpness:  
Adjusts the outline of objects to either sharpen them or make them more dull.
♦ Colour:   Adjusts the colours, making them lighter or darker. ♦ Tint:  Adjusts the colour of objects, making them more red or 
green for a more natural look.
  The adjusted values are stored according to the selected Picture mode.   In PC mode, you can only make changes to "Backlight", "Contrast" and "Brightness". (26, 32, 37 inch) 
In PC mode, you can only make changes to "Contrast" and "Brightness". (40 inch)  
    In Analogue TV, Ext., AV, S-Video modes of the PAL system, you cannot use the "Tint" Function.  You can return to the factory defaults picture settings by selecting the "Reset".    (Refer to "Resetting the Picture Settings to the Factory Defaults" on page 18)
Adjusting the Custom Picture
PictureMode  : Standard   backlight       7Contrast      95brightness      5Sharpness      50 Colour      50Tint                      G  50      R 50Detailed Settings       Picture Options       Reset : OK   
TV
 Move   Enter Return
7
▲backlight 
▼
 Move  Adjust    Return
You can set detailed picture settings.
1.    Press the  MENU button to display the menu. 
Press the  ENTER button, to select "Picture".
.     Press the ENTER button to select “Mode”. 
Press the ▲ or ▼ button to select “Standard” or “Movie”, then 
press the  ENTER
 button.
.  Press the ▲ or ▼ button to select "Detailed Settings", then    press the ENTER button.
.  Select the required option by pressing the ▲ or ▼ button,    then press the ENTER button.
5. 
 When you are satisfied with your setting, press the    ENTER button.
6.
   Press the  EXIT button to exit.
"Detailed Settings" is available in "Standard" or "Movie" 
mode. 
In PC mode, you can only make changes to   
“Dynamic Contrast”, “Gamma” and “White Balance” from 
among the “Detailed Settings” items.
➣
➣
Configuring Detailed Settings on the Picture
Detailed Settingsblack Adjust  : Off Dynamic Contrast  : Medium Gamma  :    0 Colour Space  : Native White balance     
Flesh Tone  :    0 Edge Enhancement  : On 
 Move    Enter Return
TV
PictureMode  : Standard   backlight       7Contrast      95brightness      5Sharpness      50 Colour      50Tint                      G  50      R 50Detailed Settings       Picture Options       Reset : OK   
TV
 Move   Enter Return
BN68-01424D-Eng.indd   172008-03-03   ¿ÀÈÄ 5:21:47 
						

							English - 1
♦   black Adjust: Off/Low/Medium/high    You can directly select the black level on the screen to adjust the screen depth.
♦  Dynamic Contrast: Off/Low/Medium/high   You can adjust the screen contrast so that the optimal contrast is provided.
♦  Gamma: - ~ +   You can adjust the Primary Colour  (Red, Green, Blue) Intensity.   Press the ◄ or ► button until you reach the optimal setting.
♦  Colour Space: Auto/Native/Custom  
Colour space is a Colour matrix composed of red, green and blue colours. 
Select your favourite Colour space to experience the most natural Colour.
♦ Auto:   Auto Color Space automatically adjusts to the most natural color tone based on program 
sources. 
♦  Native:  Native Color Space offers deep and rich color tone. 
♦  Custom:  Adjusts the color range to suit your preference. 
  Customizing the Colour SpaceColour: Red/Green/blue/Yellow/Cyan/Magenta Adjusts the Colour range to suit your preference. 
“Colour” is available when “Colour Space” is set to “Custom”. 
Press the ▲ or ▼ button to select “Red”, “Green”, “Blue”, “Yellow”, “Cyan” or “Magenta”.   
Press the  ENTER
 button.Red/Green/blue: In "Colour", you can adjust the RGB values for the selected colour.  
Press the ▲ or ▼ button to select "Red", "Green" or "Blue" to change it. Press the  ENTER button. 
Press the ◄ or ► button to decrease or increase the value of a particular item.  
Press the  ENTER
 button.Reset: Resets the colour space to the default values.
♦  White  balance: R-Offset/G-Offset/b-Offset/R-Gain/G-Gain/b-Gain/Reset  You can adjust the colour temperature for more natural picture colours.  R-Offset/G-Offset/b-Offset/R-Gain/G-Gain/b-Gain: Changing the adjustment value will refresh the  adjusted screen.  Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.    Press the ◄ or ► button until you reach the optimal setting.  Reset:  The previously adjusted white balance will be reset to the factory defaults.
♦ 
 Flesh Tone: -15 ~ +15    You can emphasize the pink 'flesh tone' in the picture.  
Press the ◄ or ► button until you reach the optimal setting. 
 Changing the adjustment value will refresh the adjusted screen.
♦ 
  Edge Enhancement: Off/On   You can emphasize object boundaries in the picture. 
Resetting the Picture Settings to the Factory Defaults
You can return to the factory defaults picture settings.
1.
   To select the desired picture effect, follow the  "Changing the Picture Standard" instructions number 1 to 3     on page 16.
.   Press the ▲ or ▼ button to select "Reset", then press the     ENTER button.
. Press the ▲ or ▼ button to select "OK" or "Cancel".   Press the ENTER button.
. Press the EXIT button to exit.
   The "Reset" will be set for each Picture mode.
PictureMode  : Standard   backlight       7Contrast      95brightness      5Sharpness      50 Colour      50Tint                      G  50      R 50Detailed Settings       Picture Options        Reset : OK    
TV
 Move   Enter Return
OK
Cancel
BN68-01424D-Eng.indd   182008-03-03   ¿ÀÈÄ 5:21:47