Samsung LCD TV Ltn406w User Manual

English-24
3
Press the ENTER
button. 
The TV will begin 
memorizing all of the
available channels.
OPERATION
Storing Channels in Memory 
(Automatic Method)
The TV automatically cycles
through all of the available
channels and stores them in
memory. This takes about one to
two minutes. 
Press 
ENTERat any time to
interrupt the memorization process
and return to the CHANNEL menu.
2
Press the DOWN
button to select
“Auto program”.
1
First, select the correct
signal source (Air, STD,
HRC, IRC). See steps
1~2...

English-25
OPERATION
To Select TV/Input
Use to select TV or other external input source connected to the TV.
Use to select the screen of your choice.
1
Press the MENUbutton
to display the on-
screen menu.
press the ENTER
button.
2
Press the ENTER
button to select
“TV”, then press the 
ENTERbutton.
2
Press the ADD/ERASEbutton.
Repeatedly pressing this button will alternate between “Added” and “Erased.”
You can view any channel (including an erased channel) by using the number 
buttons on the remote...

English-26
OPERATION
To Edit the Input Source Name
Name the input device connected to the input jacks to make your input source selection easier.
1
Press the MENUbutton
to display the on-
screen menu.
Press the DOWN
button to select “Input”,
then press the
ENTERbutton.
2
Press the DOWN
buttons to select
“Edit Name”, then
press the ENTER
button.
3
Press the UP/DOWNbuttons repeatedly until
the correct vcr appears.
After the vcr is entered,
press the
ENTERbutton.
 venus-04-en  6/3/03 3:07 PM  Page 26 

English-27
OPERATION
Using Automatic Picture Settings
Your TV has two automatic picture settings (“Custom”, “Dynamic”, “Standard”, and
“Movie”) that are preset at the factory.  You can activate either Custom, Dynamic,
Standard, or Movie by pressing P.MODE (or by making a selection from the menu). Or,
you can select “Custom” which automatically recalls your personalized picture settings. 
• Choose Dynamicto increase the clarity and sharpness of the picture.
• Choose Standardfor the standard factory...

English-28
OPERATION
1
Press the MENUbutton
to display the menu. 
Press the DOWN
button to select
“Picture”, then press
the ENTERbutton.
Customizing the Picture
You can use the on-screen menus to change the contrast, brightness, sharpness,
color and tint according to personal preference.
(Alternatively, you can use one of the “automatic” settings. See before page.)
2
Press the
ENTER
buttons to select a
particular item.
3
Press the 
LEFT/RIGHT
buttons to increase or
decrease the value of
a particular...

English-29
Using Automatic Sound Settings
Your TV has four automatic sound settings (“Custom”, “Standard”, “Music”, “Movie” and
“Speech”) that are preset at the factory. You can activate any of them by pressing the
S.MODE button (or by making a selection from the on-screen menu). Or, you can select
“Equalizer”, which automatically recalls your personalized sound settings. 
• Choose Standardfor the standard factory settings.
• Choose Musicwhen watching music videos or concerts.
• Choose Moviewhen watching...

English-30
OPERATION
2
Press the DOWN
button to select
“Custom Sound”, then
press the ENTER
button.
1
Press the MENUbutton
to display the menu. 
Press the DOWN
button to select
“Sound”, then press the
ENTERbutton.
Customizing the Sound
The sound settings can be adjusted to suit your personal preference.
(Alternatively, you can use one of the “automatic” settings. See before page.)
3
Press the 
UP/DOWN
buttons to select a 
particular item to be
changed.
Press the 
LEFT/RIGHT
buttons to increase or...

English-31
OPERATION
Selecting a Menu Language
2
Press the DOWN
button to select 
Language.
Press the ENTER
button.
1
Press the MENUbutton
to display the menu.
Press the DOWN
button to select 
“Setup”, then press the
ENTERbutton.
3
Press the DOWN
button to select 
“English”, “Français”,
“Español” or
“Português”.
Press the ENTER
button.
 venus-04-en  6/3/03 3:07 PM  Page 31 

English-32
OPERATION
Setting the Blue Screen Mode
If no signal is being received or the signal is very weak, a blue screen automatical-
ly replaces the noisy picture background.
If you wish to continue viewing the poor picture, you must set the “Blue screen”
mode to “Off”.
1
Press the MENUbutton
to display the menu.
Press the DOWN
button to select
Setup, then press
the ENTERbutton.
2
Press the DOWN
button to select
Blue Screen, then
press the
ENTERbutton.
3
Press the
UP/DOWN
buttons to set Blue
Screen...

English-33
OPERATION
To Select an External Output Device
You can select one from TV, Input1 (Component1), Input2 (Component2), and S-Video
to send the signals to a device connected to the output jacks.
2
Press the DOWN
button to select 
“Video Out” then press
the ENTERbutton.
1
Press the MENUbutton
to display the menu.
Press the DOWN
button to select 
“Setup”, then press the
ENTERbutton.
3
Press the DOWN
button to select.
• If a VCR is connected to the output jacks, you can record the signals   
coming...