Samsung LCD TV Lt-P468w User Manual

							29
Connection & Input Source Setup
Connecting & Viewing Satellite TV
13
24
Connecting & Viewing Satellite TV
Connect the Satellite cable to the Antenna Input
terminal on the back of the Satellite box.Connect the Audio cable between the [Left
(white) -Audio- Right (red)] terminals on the side
or back of the TV and [Audio Out (white/red)]
terminals on the back of the Satellite box.
Connect the video cable between the [Video 1In
(yellow)] terminal on the back of the TV or the
[Video2 In (yellow)] terminal on the side of the
TV and the [Video Out (yellow)] on the back of
the Satellite box.Supply power to your TV and the Satellite box
after making all the connections.
OR
S-Video
Cable
Satellite boxRear Panel of LCD TV
Video Cable
Audio Cable Coaxial CableSatellite Antenna
œ1œ3 2√
Note
For a Satellite box with an S-VIDEO terminal, connect
the S-Video cable between the [S-Video In] on the TV
and [S-Video Out] terminal on the Satellite box.
For connection of the audio cables please follow the
instructions above.
Viewing Satellite TV
Turn your TV on, then press the [SOURCE] button
to select  or .
• If  or  is unavailable, please check that the
video cable is connected correctly.
Turn on the Satellite TV and select the channel of
your choice using the Satellite remote control.
1
2
Note
• If you have connected the TV and the VCR using the S-Video cable, press the
[SOURCE] button to select  or .
• If you have connected the video cable to the [AV2] terminal, select .
• Audio and video cables are sold separately.
AV 1
1
SOURCE
BN68-00665D-01_22~51  9/1/04  2:34 AM  Page 29  
						

							30
Connection & Input Source Setup
Connecting a DVD Player
Connecting a DVD Player
Viewing a DVD Title
To Connect Using Component Cable
1
Connect the component cable between the
[Component In1 (Y/Pb/Pr)] or [Component In 2
(Y/Pb/Pr)] terminals on the back of the TV and
the [Component Out] terminals on the back of
the DVD player.
3
Supply power to the TV and the DVD player
after making all the connections.
2
Connect the audio cable between the [Left
(white) -Audio- Right (red)] terminals on the
back of the TV and [Audio Out (white/red)]
terminals on the DVD player.
Turn on your TV, then press the [SOURCE] button
to select  or . 
• If  or  is unavailable
please check that the component cables are connected
correctly.
Turn on the DVD player and press the [PLAY]
button.
1
2
DVD Rear Panel of LCD TV
Component CableAudio Cable
œ2 1√
Caution
If Y, Pb, or Pr cables are not connected properly, the
picture will be red or blue or not appear at all. 
Note
Depending on the manufacturer, the DVD terminals
may be identified as “Y, PB, PR” or “Y, B-Y, R-Y” or “Y,
CB, CR”.
Note
• If you have connected the video cable to the [Component2] terminal instead of
[Component1], press the [SOURCE] button to select .
• Component and audio cables are sold separately.
Component1
1
SOURCE
BN68-00665D-01_22~51  9/1/04  2:34 AM  Page 30  
						

							31
Connection & Input Source Setup
Connecting a DVD Player
To Connect Using Regular Audio and Video Cables
1
Connect the video cable between the [Video 1
In (yellow)] terminal on the back of the TV or the
[Video2 In (yellow)] terminal on the side of the
TV and the [Video Out (yellow)] terminal on the
back of the DVD.
3
Supply power to the TV and the DVD player
after making all the connections.
2
Connect the audio cable between the [Left
(white) -Audio- Right (red)] terminals on the side
or back of the TV and the [Audio (white/red)
Out] terminals on the DVD.
DVD Rear Panel of LCD TV
Video Cable Audio Cable
œ2 1√
Viewing VCR Playback
Turn your TV on, then press the [SOURCE] button
to select  or .
• If  or  is unavailable, please check that the
video cable is connected correctly.
Turn on your DVD, then press the [PLAY] button.
1
2
AV 1
1
SOURCE
BN68-00665D-01_22~51  9/1/04  2:34 AM  Page 31  
						

							Connecting a Digital Set-Top Box (STB)
32
Connection & Input Source Setup
Connecting a Digital Set-Top Box (STB)
1
Connect the antenna cable to the antenna input
terminal on the back of the Set Top Box.
3
Connect the audio cable between the [Left
(white) -Audio- Right (red)] terminals on the
back of the TV and the [Audio Out (white/red)]
terminals on the back of the Set Top Box.
2
Connect the component cable between the
[Component In1 (Y/Pb/Pr)] or the [Component
In2 (Y/Pb/Pr)] terminals on the back of the TV
and the [Component Out] terminals on the back
of the Set Top Box.
4
Supply power to the TV and the Set Top Box
after making all the connections.
DVI-D Cable
(sold separately)If the STB has a DVI
OUTPUT, you can connect
using an audio cable and a
DVI-D cable.
Set Top Box Rear Panel of LCD TV
Component CableAudio CableCoaxial Cable
œ1œ3 2√
Caution
If the Y, Pb, or Pr cables  are cross wired when connecting the
component cables, the picture will be red or blue.
Viewing a Digital Broadcasting Program
Turn your TV on, then press the [SOURCE] button to
select  or . 
• If  or  is unavailable, 
please check that the component cables are connected
correctly.
Turn on the STB and select the mode of your choice.
1
2
Note
• If you have connected the video cable to the [Component2] terminals instead of
the [Component1] terminals, press the [SOURCE] button to select
.
• If you have connected using a DVI-D cable, press the [SOURCE] button to select
. In this case connect the audio cable to the [Left-Audio-Right] terminals
below the DVI terminal.
• Component and audio cables are sold separately.
Component1
1
SOURCE
BN68-00665D-01_22~51  9/1/04  2:34 AM  Page 32  
						

							This applies to all external input devices connected using the video and audio terminals.
33
Connection & Input Source Setup
Connecting a Camcorder/Gaming Device
Connecting a Camcorder/Gaming Device
1
Connect the video cable between the [Video 1In
(yellow)] terminal on the back of the TV or the
[Video2 In (yellow)] terminal on the side of the
TV and the [Video Out (yellow)] terminal on the
back of the Camcorder.
3
Supply power to your TV and the Camcorder
after making all the connections.
2
Connect the Audio cable between the [Left
(white) -Audio- Right (red)] terminals on the side
or back of the TV and [Audio Out (white/red)]
terminals on the back of the Camcorder.
Viewing a Camcorder Recording
Turn your TV on, then press the [SOURCE] button
to select  or .
• If  or  is unavailable, please check that the
video cable is connected correctly.
Turn on the Camcorder and press the [PLAY]
button.
• Please refer to the Camcorder User’s Manual.
1
2
Camcorder Gaming Device Rear Panel of LCD TV
Audio
CableVideo
Cable
œ1 2√
Note
•Connect all other external input devices in the same manner as
listed above.
•Connecting to the [AV2 IN] terminal on the side of the TV will
make it easy to use the camcorder or a gaming device.
Note
• If you have connected the video cable to the [AV1] or [AV2] terminal, press the
[SOURCE] button to select [AV1] or [AV2].  
• Set the Gaming Device or other external input devices in the same way listed
above.
• Audio and video cables are sold separately.
AV 2
1
SOURCE
BN68-00665D-01_22~51  9/1/04  2:34 AM  Page 33  
						

							34
Connection & Input Source Setup
Connecting an Amplifier/Home Theater (Variable Audio Output)
Connecting an Amplifier/Home Theater (Variable Audio Output)
Use the Monitor Out Audio terminal.
1
Connect the audio cable between the AUDIO
OUT [Left (white) -Audio- Right (red)] terminals
and the DVD Home Theater (or AV Amp) [Audio
In] terminals.
2
Press the [MUTE] button on the remote control
to cut off the sound, then adjust the volume
using the Home Theater (or AV Amp) volume
button.
Amp. DVD Home TheaterAudio Cable Rear Panel of LCD TV
œ1
Note
• For connecting speakers to the DVD Home Theater
(or AV Amp) please refer to the instructions provided
by the Amplifier/Home Theater manufacturer. 
• In order to enjoy the sound from the Home Theater
(or AV Amp), press the [MUTE] button on the TV
remote control, or press the [Volume] button to
minimize the volume or to cut off the sound from the
TV. 
• Once you minimize the volume you can hear the
sound from the Home Theater (or AV Amp).
BN68-00665D-01_22~51  9/1/04  2:34 AM  Page 34  
						

							35
Connection & Input Source Setup
Connecting an HDMI Corresponding Device
Connecting an HDMI Corresponding Device
Viewing a HDMI Device
HDMI Corresponding Device Output Terminal 
1
Connect the HDMI cable between the [HDMI
IN] on the back of the TV and the [HDMI OUT] of
the DVD player (or the HDMI Corresponding
Device). 
Turn your TV on, then press the [SOURCE] button
to select .
• If  is unavailable, please check that the HDMI
cable is connected correctly.
1
Rear Panel of LCD TV
DVD PlayerHDMI Cable
œ1
Note
HDMI cable is sold separately.
HDMI
1
SOURCE
BN68-00665D-01_22~51  9/1/04  2:34 AM  Page 35  
						

							There are many types of audio systems on the market today.
A simplified illustration of an audio system is shown below. For more information, see your audio system
owner’s manual.
36
Connection & Input Source Setup
1
Connect the Optical cable between the [Optical
Audio Out] terminal on the back of the TV and
the [Optical Audio In] terminal on the Digital
Audio.
For better sound quality, use an optical cable for an
audio device that corresponds to the optical digital audio
input. 
Connecting to a Digital Audio System
Connecting to a Digital Audio System
Rear Panel of LCD TV
Digital AudioOptical Cable
1√
Note
•The optical cable is sold separately.• The optical out is available only when you use the
HDMI digital in.
1
Connect the audio cable between the [SUB
WOOFER OUT] on the back of the TV and the [SUB
WOOFER in] of the Sub Woofer Speaker.
Connecting a Sub Woofer Speaker
Rear Panel of LCD TV
Sub Woofer SpeakerAudio Cable
1√
Note
The audio cable is sold separately.
BN68-00665D-01_22~51  9/1/04  2:34 AM  Page 36  
						

							Use the remote control to switch between viewing signals from connected equipment, such as a VCR, DVD, Set-
Top box and the TV source (broadcast or cable).
InputTV
AV1 : - - - -
AV2 : - - - -
S-Video1 : - - - -
S-Video2 : - - - -
Component1 : - - - -
Component2 : - - - -
† More
Move Enter Return
37
Connection & Input Source Setup
Source List Setup
Source List Setup
1Press the [MENU] button.The menu will be displayed
2Press the [ENTER] button to select .The  menu will be displayed.
3Press the [ENTER] button to select .The input source list will be displayed.
4
Press the […/†] buttons to move to the source of your
choice, then press the [ENTER] button.
The selected source will be displayed.
Please check the connections if the source of your choice is
unavailable.
Press the [SOURCE] button.Each press of the [SOURCE] button cycles through  ➔ ➔ ➔ ➔ ➔ ➔ ➔ ➔ ➔.
You can only select a source if it is connected to your TV.
1
MENU
2,3,4
ENTER
4
…/†
Input
Source List : TV√
Edit Name√
Anynet√
Move Enter Return
BN68-00665D-01_22~51  9/1/04  2:35 AM  Page 37  
						

							You can edit the name of the input devices connected.
38
Connection & Input Source Setup
Editing Input Source Names
Input
AV1 : - - - -√
AV2 : - - - -√
S-Video1 : - - - -√
S-Video2 : - - - -√
Component1 : - - - -√
Component2 : - - - -√
† More
Move Enter Return
Input
AV1 : - - - -√
AV2 : - - - -√
S-Video1 : - - - -√
S-Video2 : - - - -√
Component1 : - - - -√
Component2 : - - - -√
† More
Move Enter Return
Editing Input Source Names
1Press the [MENU] button.The menu will be displayed
2Press the [ENTER] button to select .The  menu will be displayed.
3
Press the […/†] buttons to move to , then
press the [ENTER] button.
The  screen will be displayed.
5
Press the […/†] buttons to move to the device of your
choice, then press the [ENTER] button.
Setup is switched to the selected device.
6Press the [EXIT] button to finish.
4Press the […/†] buttons to move to the source list to edit,
then press the [ENTER] button.
1
MENU
2,3,4,5
ENTER
3,4,5
…/†
6
EXIT
Input
Source List : TV√
Edit Name√
Anynet√
Move Enter Return
- - - -VCR
DVD
Cable STB
HD STB
Satellite STB
AV Receiver
†
Note
DHR: DVD HDD
Recorder.
BN68-00665D-01_22~51  9/1/04  2:35 AM  Page 38