Samsung LCD TV Lt-P468w User Manual
Have a look at the manual Samsung LCD TV Lt-P468w User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
9 Rear Panel Jacks Getting started Your TV and Accessories 1OPTICAL DIGITAL AUDIO OUTPUT 2HDMI INPUT 3DVI INPUT 4DVI AUDIO INPUT 5PC AUDIO INPUT 6PC INPUT 7COMPONENT1 VIDEO INPUT 8COMPONENT2 VIDEO INPUT 9COMPONENT1 AUDIO INPUT 10COMPONENT2 AUDIO INPUT11S-VIDEO INPUT1 12SUBWOOFER OUTPUT 13VIDEO INPUT1 14VIDEO OUTPUT 15ANTENNA INPUT 16AUDIO INPUT 17AUDIO OUTPUT 18ANYNET 19POWER INPUT 20VIDEO INPUT2 21AUDIO INPUT 22S-VIDEO INPUT2 23HEADPHONE JACK BN68-00665D-01_02~21 9/15/04 2:58 AM Page 9
Remote Control Buttons 10 Getting started Your TV and Accessories Your TV and Accessories Remote Control and Accessories Œ˝ Ò Ú Æ ı ˜ Ô ´ ˇ ¨ ˆ Ø ∏ ” ’ 1POWER 2P.SIZE √See page 69Press to change the screen size. 3Numbers√See pages 43~45Press to select channels. 4+100√See page 43Press to select channels over 100. 5MUTEPress to temporarily cut off the sound. 6Volume ControlPress to increase or decrease the volume. 7AnynetPlease refer to the Anynet Owner’s Instructions. 8MENUPress to display the on-screen menu. 9Move & ENTER√See page 12Press to select or move to menu values. 10LCD DisplayShows the battery status and selected input source device. 11P.MODE√See page 52Adjust the TV picture by selecting one of the preset factory settings (or select your personal, customized picture settings). 12MODE√See page 13 13PRE-CH Press to return to the previous viewing channel. 14SOURCE√See pages 28~35Press to select or check the status of the TV, AV1, AV2, S-Video1, S-Video2, Component1, Component2, HDMI, DVI or PC. 15Channel Buttons√See pages 43~45Press to change channels. 16INFODisplays current channel’s receiving sensitivity, input signal, picture standard, sound standard, and time. Signal Strength ( ) displayThe < > (Signal Strength) symbol is displayed by pressing the [INFO] button. This symbol displays signal strength for your watching TV channel. The more signal bar is the better TV gets sensitivity on current channel. 17EXITPress to exit from the menu. BN68-00665D-01_02~21 9/15/04 2:58 AM Page 10
11 Getting started Your TV and Accessories – 18STILL√See page 73Press to stop the action during a particular scene. Press again to resume normal video. 19PIP√See page 56Press this button to control the PIP window. 20ADD/DEL√See pages 44~45Press to add or erase channels. 21AUTO PROG.√See page 42Press to automatically store selected channels. 22DNIe√See page 55Press to improve picture quality. 23PCPress to check the status of the PC connection or select PC mode. 24VIDEO/DVD Buttons 25SET √See page 13Press to set to VIDEO, Cable TV or DVD. 26MTS√See page 78Press to choose stereo, mono or Secondary Audio Program (SAP broadcast). 27SRS TSXT√See page 80Press to enjoy simulated 5.1 Channel surround sound with 2.1 channel speakers. 28SIZE (PIP)√See page 59Press to make PIP window small, double1. double2. 29Channel (PIP)√See page 61Displays the available channels in sequence (These buttons change channels in the PIP window only). 30RESETIf your Remote Control does not work, change the batteries and press the RESET button for 2-3 seconds before use. ¯ ¿ ˛ ◊ ≠ ˘ ¸ ± ÷ — ® ∑ Accessories Remote Control (BN59-00435B) Batteries (1.5V, AAA type) (4301-000103) Power Cable (3903-000085)Anynet Cable (BN39-00518A)Antenna Cable (AA39-00039A)Owner’s Instructions/Anynet AV Owner’s Instructions/ Safety Guide Manual/ Warranty Card ; 2EA/Registration Card BN68-00665D-01_02~21 9/15/04 2:58 AM Page 11
12 Getting started Using Your Remote Control Using the Move and ENTER Buttons Your TV and Accessories Using Your Remote Control Inserting Batteries in the Remote Control Moves to an upper menu item.Moves to a lower menu item. Adjusts the selected item (to the left)Press to select the chosen item. Adjusts the selected item (to the right) 1. Hold down the area and slide the cover out. 2. Install two AAA size 1.5V batteries ensuring that the “+” and “-“ ends of the batteries are correctly aligned. 3. Replace the cover. Remote Control Operation Angle The remote control operation angle lies within a 30˚ angle to the right or left of the TV and up to a distance of about 23 feet from the TV. Caution • Properly dispose of the expired batteries. Contact your local government or community disposal service for disposal practices in your area. Keep them away from small children. • Do not mix old and new batteries. When replacing the batteries, replace them both. • If the Remote Control will not be in use for a while, remove the batteries. BN68-00665D-01_02~21 9/15/04 2:58 AM Page 12
13 Getting started Setting Up Your Remote Control Your TV and Accessories Setting Up Your Remote Control This TVs remote control can operate almost any VCR, cable box or DVD. It can also operate Samsung set-top boxes. After it has been set up properly, your remote control can operate in five different modes: TV, VCR, CATV, DVD or STB. Pressing the corresponding button on the remote control allows you to switch between these modes, and control whichever piece of equipment you choose. Note •The remote control may not be compatible with all DVD Players, VCRs, Cable boxes. •The remote control can only operate STB made by Samsung. •When your remote control is in the VCR, CATV, DVD or STB mode, the volume buttons still control your TV’s volume. •When your remote control is in the TV mode, the VCR or DVD control buttons (rewind, stop, play/pause and fast forward) still operate your VCR or DVD. Setting Up the Remote to Operate Your VCR, Cable box or DVD player 3 Press the [SET] button on your TVs remote control. 4 Enter 3 digits of the VCR (Cable box or DVD) code listed on next page for your VCR (Cable box or DVD). 1Turn off your VCR. (or Cable box, DVD player) 2 Press the [MODE] button. The Mode is changed whenever [MODE] button is pressed. 5 Press the [POWER] button. Your VCR (Cable box or DVD) should turn on. If it turns on, your remote control is now set correctly. If it does not turn on, repeat steps above, but try one of the other codes listed for the brand of particular yours. 6 Once your remote control is set up, press the [MODE] button any time you want to use the remote control to operate VCR (Cable box or DVD). BN68-00665D-01_02~21 9/15/04 2:58 AM Page 13
14 Getting started Programming the Remote Control for Other Components Your TV and Accessories Programming the Remote Control for Other Components VCR Remote Control Codes BN68-00665D-01_02~21 9/15/04 2:58 AM Page 14
15 Getting started Programming the Remote Control for Other Components Cable Box (CATV) Remote Control Codes DVD Remote Control Codes BN68-00665D-01_02~21 9/15/04 2:58 AM Page 15
Wall Installation Instructions Notes & Checking Parts 16 List of Contents (Sold Separately) Installation Notes Getting started Notes & Checking Parts 1. The Wall Attachment Panel is sold separately. 2. Do not install the product in any location other than a vertical wall. 3. To protect the performance of your product and prevent problems, avoid the following locations:•Any place vulnerable to vibration or impact: The product may come off and break. •Near smoke and fire detectors: The sprinkler may be activated upon detecting heat from the product. •Near high voltage: The reception for your product may be interrupted. •Near heat sources: The product may get overheated. Wall Mount BracketScrewsPlastic Screw Anchors [VMTL-4600] BN68-00665D-01_02~21 9/15/04 2:58 AM Page 16
Wall Installation Instructions Attaching Your TV to the Wall Attachment Panel Bracket 17 How to Attach the TV to the Bracket (sold separately) Getting started Attaching Your TV to the Wall Attachment Panel Bracket 1. Remove the 6 screws from the back of the TV. 2. Separate the stand from the monitor. Remove 6 screws BN68-00665D-01_02~21 9/15/04 2:58 AM Page 17
Wall Installation Instructions Attaching Your TV to the Wall Attachment Panel Bracket 18 Getting started Attaching Your TV to the Wall Attachment Panel Bracket 3. Assemble the plastic screw anchors and the screws. (See the picture below.) 4. Tighten the screw assemblies (as shown in Picture 3) to the back of the TV. 6 Screw Assemblies BN68-00665D-01_02~21 9/15/04 2:58 AM Page 18