Samsung Ht Z510 User Manual

1
ENg

●  CONNECTIONS

Front / rear & Center Speakers Cradle Stand and Wall Mount Installation
Installing the Cradle Stand 
1.   Insert the stand so that it fi ts into the hole 
as described in the fi gure.
2.   Turn the stand clockwise to lock it.
(Turning it counter-clockwise will loosen
from the hole.)
3.  This is the completion of the stand
      installation.
 
33

11
Speaker Components
HT-Z510
Front
L (aH81-03845e)
R (aH81-03845L)
SubWooFer
(aH81-03845D)
rear
L (aH81-03845G)
R...

0

connections

Front / rear & Center Speakers Cradle Stand and Wall Mount Installation
3.   Put the hole cover on the hole of the 
speaker.
4.   Use a coin turn the hole cover clock wise 
to fi x it. (Turning it count-clock wise will 
loosen from the hole.)
5.  Use the wall mount hole (bracket) to install
     the speaker on the wall.55
33

Installing the Wall Mount
 
1.   Insert the wall mount so that it fi  ts into the 
rear hole of the speaker as in the fi gure.
2.   Turn the wall...

1
ENg

●  CONNECTIONS

Speaker Components
 Turn the STAND upside-down and connect 
it to the STAND BASE.
Insert three small SCrEWS into three holes 
marked with arrows using a screwdriver as 
shown in the illustration.
Insert a large SCrEW into the hole on the 
rear of the Speaker STAND.
Connect the assembled stand to the 
SPEAKEr.
Insert another large SCrEW into the hole 
on the rear of the speaker using a 
screwdriver as shown in the illustration.
This is the successfully assembled speaker. 
Make...

22

connections

Connecting the Front, Center and Subwoofer Speakers
   Press down the terminal tab on the back of the speaker. 
  Insert the black wire into the black terminal (–) and the red wire into    
  the red (+) terminal, and then release the tab.
  Connect the connecting plugs to the back of the Home Theater.
Make sure the colors of the speaker terminals match the colors of 
the connecting plugs.
1.
2.
3.
•
BlackRed
  If you place a speaker near your TV set, screen color may be distorted...

3
ENg

●  CONNECTIONS

CONNECTINg THE rEAr SPEAKErS TO THE WIrELESS rECEIVINg AMPLIFIEr
 Wireless receiving Module (SWA-4000)  
Front Speaker (R)
Rear Speaker (L)Subwoofer
Center Speaker
Rear Speaker (R)
WIRELESS RECEIVER MODULE
Front Speaker (L)
HT-Z510
Front Speaker (R)
Rear Speaker (L)
Subwoofer
Center Speaker
Rear Speaker (R)
WIRELESS RECEIVER MODULE
Front Speaker (L)
HT-TZ512

HT-Z510_XAA_0124.indd   232008-01-24   �� 6:37:04 



connections

CONNECTINg THE WIrELESS rECEIVINg AMPLIFIEr
  
  
Connect the front, center and Subwoofer speakers to the  
DVD Player, refering to page 21.
    
With the DVD Player turned off, insert the TX card into the 
 
TX Card Connection(WIRELESS) on the back of the main unit.
Hold the TX card so that the slanted side faces to the left  
and insert the card into the port. 
The TX card enables communication between the main  
unit and the wireless receiver. 
Connect the left and right rear...

5
ENg

●  CONNECTIONS

CONNECTINg THE VIDEO OUT TO YOUr TV
Choose one of the three methods for connecting to a TV.
METHOD3(supplied)METHOD2METHOD1
METHOD 1 : HDMI
Connect the HDMI cable from the HDMI OUT jack on the back of the DVD Home Theater to the HDMI 
IN jack on your TV.
METHOD 2 : Component Video
If your television is equipped with Component Video inputs, connect a component video cable(not 
supplied) from the Component Video Output (Pr, Pb and Y) Connectors on the back of the main unit to...



connections

HDMI Auto Detection Function
The player's video output will automatically change to HDMI mode when connecting an HDMI cable 
while power is on. For possible HDMI resolutions, see page 27.
HDMI (High Definition Multimedia Interface)
HDMI is an interface that enables the digital transmission of video and audio data with just a single connector. Using HDMI, the DVD Home Theater transmits a digital video and audio signal and displays a vivid picture on a TV having an HDMI input...


ENg

●  CONNECTIONS

HDMI FUNCTION
resolution Selection
This function allows the user to select the screen resolution for 
HDMI output.
In Stop mode, press and hold the SD/HD (Standard 
Defi nition/High Defi nition) button on the remote control.
Resolutions available for the HDMI output are 480p, 720p, 
1080i/1080p.
SD(Standard Defi nition) resolution is 480p and HD
(High Defi nition) resolution is 720p, 1080i/1080p.
If the TV does not support the confi gured 
resolution, you will not be able...



connections

CONNECTINg AN iPod
You can listen to the audio from an iPod through the main unit. For iPod operation with this Home Theater, see 
pages 29 and 49.
Connect the iPod dock connector to the iPod jack on the DVD home theater.
Press the POrT button on the remote control to select iPod input.
You can also use the FUNCTION button on the main unit. 
The mode switches as follows :  
DVD/CD ➞ D.IN ➞ AUX 1 ➞ AUX 2 ➞ USB ➞ OSD iPOD ➞ FM ➞ XM.
 As the cable ports are close together, be sure...