Samsung Ht Z510 User Manual

							
1
ENg

●  CONNECTIONS

Front / rear & Center Speakers Cradle Stand and Wall Mount Installation
Installing the Cradle Stand 
1.   Insert the stand so that it fi ts into the hole 
as described in the fi gure.
2.   Turn the stand clockwise to lock it.
(Turning it counter-clockwise will loosen
from the hole.)
3.  This is the completion of the stand
      installation.
 
33

11
Speaker Components
HT-Z510
Front
L (aH81-03845e)
R (aH81-03845L)
SubWooFer
(aH81-03845D)
rear
L (aH81-03845G)
R (aH81-03845M)
Center
(aH81-03845F)
FRONT/REAR
(aH81-03465a)
CENTER
(aH81-03469a)
CRADLE STAND/
WALL MOUNT
HoLe CoVer
FRONT/REAR
(aH81-03852a)
CENTER
(aH81-03853a)
(L)(r)
(L)(r)

Ht-Z510_XAA_0124.indd   192008-01-24   �� 6:36:47 
						

							
0

connections

Front / rear & Center Speakers Cradle Stand and Wall Mount Installation
3.   Put the hole cover on the hole of the 
speaker.
4.   Use a coin turn the hole cover clock wise 
to fi x it. (Turning it count-clock wise will 
loosen from the hole.)
5.  Use the wall mount hole (bracket) to install
     the speaker on the wall.55
33

Installing the Wall Mount
 
1.   Insert the wall mount so that it fi  ts into the 
rear hole of the speaker as in the fi gure.
2.   Turn the wall mount counter clockwise to 
fi x it. (This is the reverse direction to the 
cradle stand.)

11
 To avoid accident fall and consequent damage to the customer and speaker, make sure 
the speaker is hung safely.
M`

Ht-Z510_XAA_0124.indd   202008-01-24   �� 6:36:51 
						

							
1
ENg

●  CONNECTIONS

Speaker Components
 Turn the STAND upside-down and connect 
it to the STAND BASE.
Insert three small SCrEWS into three holes 
marked with arrows using a screwdriver as 
shown in the illustration.
Insert a large SCrEW into the hole on the 
rear of the Speaker STAND.
Connect the assembled stand to the 
SPEAKEr.
Insert another large SCrEW into the hole 
on the rear of the speaker using a 
screwdriver as shown in the illustration.
This is the successfully assembled speaker. 
Make sure that the speaker is installed on a 
fl at and stable area. Otherwise it may be 
easily knocked over.
1.
.
3.
.
5.
.
1
5
How to Install the Speaker on the Stand (HT-TZ512 only)
STANDBASE
3
STAND
SPEAKER
STAND
How to Install the Speaker on the Stand Base (HT-TZ512 only)
Connect the SPEAKEr with the 
STAND BASE.
Insert the SCrEW into the hole on the rear 
of the speaker using a screwdriver as shown 
in the illustration.
This is the SPEAKEr successfully 
assembled with the Stand Base.
1.
.
3.
1
3
SPEAKER
STANDBASE
SubWooFer
(aH81-04171D)
StanD baSe
(aH81-03846p)
StanD
(aH81-03846n)
Front
L (aH81-04171e)
R (aH81-03848H)
SCREW (Large): 4EA
(aH81-03943a)
SCREW (Small): 6EA
(aH81-03944a)
HT-TZ512
rear
L (aH81-04171G)
R (aH81-03848J)
Center
(aH81-04171F)
CRADLE STAND/
WALL MOUNT
FRONT/REAR
(aH81-03465a)
CENTER
(aH81-03469a)
FRONT/REAR
(aH81-03852a)
CENTER
(aH81-03853a)
HoLe CoVer
(L)(r)
(L)(r)

Ht-Z510_XAA_0124.indd   212008-01-24   �� 6:36:58 
						

							
22

connections

Connecting the Front, Center and Subwoofer Speakers
   Press down the terminal tab on the back of the speaker. 
  Insert the black wire into the black terminal (–) and the red wire into    
  the red (+) terminal, and then release the tab.
  Connect the connecting plugs to the back of the Home Theater.
Make sure the colors of the speaker terminals match the colors of 
the connecting plugs.
1.
2.
3.
•
BlackRed
  If you place a speaker near your TV set, screen color may be distorted because of the 
magnetic  eld generated by the speaker. If this occurs, place the speaker away from your 
TV set.
M
Do not let children play with or near the speakers. They could get hurt if a speaker falls.
When connecting the speaker wires to the speakers, make sure that the polarity (+/ –) is correct.
  Keep the subwoofer speaker out of reach of children so as to prevent children from 
inserting their hands or alien substances into the duct (hole) of the subwoofer speaker.
  Do not hang the subwoofer on a wall through the duct (hole).




Subwoofer
Center Speaker
Front Speaker (R)
Front Speaker (L)
Speaker
Stand
Subwoofer
Center SpeakerFront Speaker (R)
Front Speaker (L)
HT-Z510HT-TZ512
* To connect the rear speakers, refer to page 23.

HT-Z510_XAA_0125.indd   222008-01-25   �� 11:28:31 
						

							
3
ENg

●  CONNECTIONS

CONNECTINg THE rEAr SPEAKErS TO THE WIrELESS rECEIVINg AMPLIFIEr
 Wireless receiving Module (SWA-4000)  
Front Speaker (R)
Rear Speaker (L)Subwoofer
Center Speaker
Rear Speaker (R)
WIRELESS RECEIVER MODULE
Front Speaker (L)
HT-Z510
Front Speaker (R)
Rear Speaker (L)
Subwoofer
Center Speaker
Rear Speaker (R)
WIRELESS RECEIVER MODULE
Front Speaker (L)
HT-TZ512

HT-Z510_XAA_0124.indd   232008-01-24   �� 6:37:04 
						

							


connections

CONNECTINg THE WIrELESS rECEIVINg AMPLIFIEr
  
  
Connect the front, center and Subwoofer speakers to the  
DVD Player, refering to page 21.
    
With the DVD Player turned off, insert the TX card into the 
 
TX Card Connection(WIRELESS) on the back of the main unit.
Hold the TX card so that the slanted side faces to the left  
and insert the card into the port. 
The TX card enables communication between the main  
unit and the wireless receiver. 
Connect the left and right rear speakers to the wireless  
receiving module. 
Plug the power cord of the wireless receiving module  
in the wall outlet and switch the power switch ON.  
 
 
1.
.
~
~
3.
.
Slanted side face lefttX card
Do not insert any other card except the TX card dedicated to the product.   If a different TX card is used, the product may be damaged or the card may not be removed easily.Do not insert the TX card upside down or in the reverse direction.
   Insert the TX card when the DVD Player is turned off. Inserting the card when it is turned  on may cause a problem.
If the TX Card is inserted and wireless receiving module setting is complete, sound is not output from the Rear Speaker connectors on the main unit.
  The wireless receiving antenna is built into the wireless receiver module. Keep the unit 
away from water and moisture.For optimal listening performance, make sure that the area around the wireless receiver module location is clear of any obstructions.If no sound is heard from the wireless rear speakers, switch the mode to DVD 5.1 channel or Dolby ProLogic II .In 2-CH mode, no sound will be heard from the wireless rear speakers.
`
``
`
`
`
`
`
 Place the wireless receiver module at the rear of the listening position. If the wireless receiver module is too close to the main unit, some sound interruption may be heard due to interference.If you use a device such as a microwave oven, wireless LAN Card, Bluetooth equipment, or any other device that uses the same frequency (5.8GHz) near the system, some sound interruption may be heard due to interference.The transmission distance from the main unit to the wireless receiving module is about 33 feet (10m), but may vary depending on your operating environment. If a steel-concrete wall or metallic wall is between the main unit and the wireless receiver module, the system may not operate at all, because the radio wave cannot penetrate metal.This product(HT-Z510/HT-TZ512) is also compatible with the wireless receiver module SWA-3000.If the main unit doesn't make wireless connection, the system needs ID Setting between main unit and wireless receiver module. With the main unit turned off, press remote control's number button "0""1""3""5" and unit turned on. With the wireless receiver module turned on, press "ID SET" button on the back of the unit for 5 seconds.
M`
`
`
`
`
RESET

Ht-Z510_XAA_0124.indd   242008-01-24   �� 6:37:05 
						

							
5
ENg

●  CONNECTIONS

CONNECTINg THE VIDEO OUT TO YOUr TV
Choose one of the three methods for connecting to a TV.
METHOD3(supplied)METHOD2METHOD1
METHOD 1 : HDMI
Connect the HDMI cable from the HDMI OUT jack on the back of the DVD Home Theater to the HDMI 
IN jack on your TV.
METHOD 2 : Component Video
If your television is equipped with Component Video inputs, connect a component video cable(not 
supplied) from the Component Video Output (Pr, Pb and Y) Connectors on the back of the main unit to 
the Component Video Input Connectors on your TV.
METHOD 3 : Composite Video
Connect the supplied video cable from the VIDEO OUT jack on the back of the main unit to the VIDEO 
IN jack on your TV.
Resolutions available for the HDMI output are 480p, 720p,1080i/1080p.
This product operates in Interlace scan mode (480i) for Component Output.
After making the video connection, set the Video input source on your TV to match the 
corresponding Video output (HDMI, Component or Composite) on your Home theater. 
See your TV owner's manual for more information on how to select the TV's Video Input source.
If you use an HDMI cable to connect a Samsung TV to the main unit, you can operate the Home 
Theater using the TV's remote control. (This is only available with SAMSUNG TVs that support 
Anynet+(HDMI-CEC).)
Please check the logo (If your TV has an logo, then it supports Anynet+ 
function.)
M`
`
`
`
`

Ht-Z510_XAA_0124.indd   252008-01-24   �� 6:37:10 
						

							


connections

HDMI Auto Detection Function
The player's video output will automatically change to HDMI mode when connecting an HDMI cable 
while power is on. For possible HDMI resolutions, see page 27.
HDMI (High Definition Multimedia Interface)
HDMI is an interface that enables the digital transmission of video and audio data with just a single connector. Using HDMI, the DVD Home Theater transmits a digital video and audio signal and displays a vivid picture on a TV having an HDMI input jack.
HDMI connection description
HDMI connector - Supports video and digital audio data.
- HDMI outputs only a pure digital signal to the TV.
-   If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the 
screen.
Why does Samsung use HDMI?
Analog TVs require an analog video/audio signal. However, when playing a DVD, the data transmitted to a TV is digital. Therefore either a digital-to-analog converter (in the DVD Home Theater) or an analog-to-digital converter (in the TV) is required. During this conversion, the picture quality is degraded due to noise and signal loss. HDMI technology is superior because it requires no D/A conversion and is a pure digital signal from the player to your TV.
What is the HDCP?
HDCP (High-band width Digital Content Protection) is a system for protecting DVD content outputted via HDMI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a display device  (TV, projector. etc). Content is encrypted at the source device to prevent unauthorized copies from being made.
What is Anynet+?
Anynet+ is a convenient function that offers linked operation of this unit through Samsung TVs with the Anynet+ feature.
-   If your Samsung TV has an
 logo, then it supports the Anynet+ function.
-     
  
If you turn on the player and insert a disc, the player will start playing the disc, and the TV will turn on 
automatically and switch to HDMI mode.
-   
If you turn on the player and press the Play button with a disc already inserted, the TV will immediately turn on 
and switch to HDMI mode.
~
~
~
~
~

HT-Z510_XAA_0124.indd   262008-01-24   �� 6:37:10 
						

							

ENg

●  CONNECTIONS

HDMI FUNCTION
resolution Selection
This function allows the user to select the screen resolution for 
HDMI output.
In Stop mode, press and hold the SD/HD (Standard 
Defi nition/High Defi nition) button on the remote control.
Resolutions available for the HDMI output are 480p, 720p, 
1080i/1080p.
SD(Standard Defi nition) resolution is 480p and HD
(High Defi nition) resolution is 720p, 1080i/1080p.
If the TV does not support the confi gured 
resolution, you will not be able to see the picture 
properly.
When an HDMI cable is connected, composite and 
component video signals are not output.
See your TV owner's manual for more information on 
how to select the TV's Video Input source.
Using Anynet+(HDMI-CEC)
Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote 
control, Anynet + can be used by connecting this Home Theater to a SAMSUNG TV using an HDMI Cable. 
This is only available with SAMSUNG TVs that support Anynet+.
Connect the main unit of the Home Theater to a Samsung 
TV with an HDMI cable. (See page 25)
Set the Anynet+ function on your TV.
(See the TV instruction manual for more information.)
You can operate the Home Theater by using the TV 
remote control. (Available TV buttons : , , , , 
, and , buttons,~button)
If you select the TV
Set the Anynet+(HDMI-CEC) to On by pressing the Anynet+ 
button on your TV remote control.
• receiver : On : You can listen to audio through the Home Theater.
• receiver : Off : You can listen to audio through the TV.
If you select the THEATEr
Select THEATEr to connect and set the option of each item below.
• View TV : If anynet+(HDMI CEC) is set to on and you select View TV, the
                     home theater will automatically switch to digital in mode.
• Theater Menu : you can access and control the Home theater menu.
• Theater Operation : The Home Theater disc playback 
                                     information will be displayed. You can
                                     control the Disc operation of the 
                                     Home Theater such as title, chapter 
                                     and subtitle change.
• receiver : On : You can listen to audio through the Home Theater.
• receiver : Off : You can listen to audio through the TV.
In case that you chose 'View TV', if you want to listen to TV sound through Digital In, you 
have to connect the optical cable between the TV and the Home Theater.
~
~
M`
`
`
1.
.
~
M`
Why use HDMI (High Defi nition Multimedia Interface)? 
This device transmits a DVD video signal digitally without the process of converting to analog. You will get sharper digital pictures when using an HDMI connection.
MoveEnterExit
SetupConnected to PlayerOff  On   
View TVTHEATER
THEATER Menu
MOVEENTEREXIT
MOVEENTEREXITMoveEnterExit
SetupConnected to PlayerOff  On   
View TVTHEATER
THEATER Menu
MOVEENTEREXIT
With Anynet+
You can operate this unit, power on your TV, or watch a movie by pressing the Play button on your Samsung TV's remote control.

HT-Z510_XAA_0124.indd   272008-01-24   �� 6:37:15 
						

							


connections

CONNECTINg AN iPod
You can listen to the audio from an iPod through the main unit. For iPod operation with this Home Theater, see 
pages 29 and 49.
Connect the iPod dock connector to the iPod jack on the DVD home theater.
Press the POrT button on the remote control to select iPod input.
You can also use the FUNCTION button on the main unit. 
The mode switches as follows :  
DVD/CD ➞ D.IN ➞ AUX 1 ➞ AUX 2 ➞ USB ➞ OSD iPOD ➞ FM ➞ XM.
 As the cable ports are close together, be sure to remove the wireless adaptor before 
disconnecting the ipod docking cable.
Depending on the type of iPod. You may need to insert one of the dock slots into the dock 
before you station your iPod (see next page).
Adjust the volume to a moderate level before you connect your iPod and DVD home 
theater.
When the unit is powered on and you connect an iPod, the unit will charge your iPod's 
battery.
Make sure to connect the dock connector so that the 
label “ SAMSUN g” faces upward.
1.
.
~
M`
`
`
`
`

Ht-Z510_XAA_0124.indd   282008-01-24   �� 6:37:18