Samsung Ht Z120t User Manual

40
System setup
SeTTING THe TV SCreeN TYPe 
Depending on your TV type (Widescreen or conventional 4:3), you can select the TV's aspect ratio. 
In Stop mode, press the 
1.  MeNU button.
Press the Cursor 
2. 
% button to move to Setup and then press the   
eNTer button.
Press the Cursor 
3. 
% button to move to TV DISPLAY and then   
press the eNTer button.
Press the Cursor 
4. 
$,% button to select the desired item   
and then press the eNTer button.
Once the setup is complete, you will be taken to...

41
eNG
●  SYSTeM SeTUP
SeTTING PAreNTAL CONTrOLS (rATING LeVeL)
Use this to restrict playback of adult or violent DVDs you do not want 
children to view.
In Stop mode, press the 
1.  MeNU button.
Press the Cursor 
2. 
% button to move to Setup and then press the 
eNTer button.
Press the Cursor 
3. 
% button to move to PAreNTAL and then press 
the eNTer button.
Press the Cursor 
4. 
$,% button to select the desired rating level and 
then press the eNTer button.
If you have selected Level 6, you cannot...

42
System setup
SeTTING THe WALLPAPer
 dG
While watching a DVD or JPEG CD, you can set the image you like as backg\
round wallpaper.  
During playback, press the 
1.  PAUSe button when  
an image you like appears.
Press the 
2.  LOGO button.
COPY LOGO DATA
•	  will be displayed on the TV screen.
The power will turn off and then back on.
3. 
The selected wallpaper will be displayed. 
•	
You can select up to 3 wallpaper settings. 
•	
TO SeLeCT ONe OF THe 3 W ALLPAPer SeTTINGS YOU'Ve MADe
In Stop mode,...

43
eNG
●  SYSTeM SeTUP
SeTTING THe SPeAKer MODe
 
Signal outputs and frequency responses from the speakers will 
automatically be adjusted according to your speaker configuration and 
whether certain speakers are used or not.In Stop mode, press the 
1.  MeNU button.
Press the Cursor 
2. 
% button to move to Audio and then press the 
eNTer button.
In the 
3.  SPeAKer SeTUP, press the eNTer button again.
Press the Cursor 
4.  , , ,  button to move to the desired speaker 
and then press the eNTer...

44
System setup
When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance betwe\
en you and each 
speaker is the same.  
Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can 
adjust this difference by adding a delay effect to the sound of the Centre and Rear Speakers.
Setting Centre SPeAKer
If the distance of Dc is equal to or longer than the   
distance of Df in the figure, set the mode as 0ms.   
Otherwise, change...

45
eNG
●  SYSTeM SeTUP
SeTTING THe TeST TONe
Use the Test Tone feature to check the speaker connections.In Stop mode, press the 
1.  MeNU button.
Press the Cursor 
2. 
% button to move to Audio and then press the 
eNTer button.
Press the Cursor 
3. 
% button to move to TeST TONe and then press 
the eNTer button.
The test tone will be sent to 
•	 L ➞ C ➞  r ➞ Sr ➞  SL ➞ SW in 
order.   
If the eNTer button is pressed again at this time, the test tone 
will stop.
d Press the reTUrN button to return to the...

46
System setup
SeTTING THe AUDIO
Press the SOUND eDIT button and then press the Cursor , button.
Adjusting Front/rear Speaker Balance
You can select between 0, -6, and OFF. 
`
The volume decreases as you move closer to –6.   
`
Adjusting Centre/rear/Subwoofer Speaker Level
The volume level can be adjusted in steps from +6dB to –6dB. 
`
The sound gets louder as you move closer to +6dB and quieter as you get \
closer to -6dB. 
`
SeTTING THe DrC (DYNAMIC rANGe COMPreSSION)
This feature balances the range...

47
eNG
●  SYSTeM SeTUP
SeTTING THe AV SYNC
Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to 
match the video.In Stop mode, press the 
1.  MeNU button.
Press the Cursor 
2. 
% button to move to Audio and then press the 
eNTer button.
Press the Cursor 
3. 
% button to move to AV-SYNC and then press 
the eNTer button.
Press the Cursor 
4. 
 , button to select the AV-SYNC Delay Time  
and then press the eNTer button.
You can set the...

48
System setup
SOUND FIeLD (DSP)/eQ FUNCTION
DSP(Digital Signal Processor) : DSP modes have been designed to simulate different acoustic environments. 
EQ : You can select ROCK, POPS  to optimize the sound for the genre of music you are playing
Press the DSP/EQ button.
DSP
•	  appears on the display panel.
Each time the button is pressed, the selection changes as follows:
POPS  ➞ JAZZ   ➞ rOCK  ➞ STUDIO  ➞ CLUB  ➞ HALL  ➞ MOVIe  ➞ CHUrCH  ➞ PASS  
POPS, JAZZ, rOCK 
•	 : Depending on the genre of music,...

49
eNG
●  SYSTeM SeTUP
DOLBY PrO LOGIC II eFFeCT
This function works only in Dolby Pro Logic MUSIC mode.
Press the 
1. PL II MODe button to select MUSIC mode.
Press the 
2. 
PL II eFFeCT button.
Press the 
3. 
 , buttons to select the desired effect setting.
PANORAMA : You can select either 0 or 1.
•	
C- WIDTH : You can select between 0 and 7.
•	
DIMENS : You can select between 0 and 6.
•	
P.BASS 
The P.BASS function provides a bass boost to reinforce the low frequencies.
Press the 
1.  P.BASS button...