Samsung Ht Z120t User Manual

20
Connections
P.SCAN(PrOGreSSIVe SCAN) FUNCTION
Unlike regular Interlace Scan, in which two fields of picture information alternate to create the entire picture 
(odd  scan  lines,  then  even  scan  lines),  Progressive  Scan  uses  one  field  of  information  (all  lines  displayed  in 
one pass) to create a clear and detailed picture without visible scan lines. 
Press STOP button.
1. 
  
•	
 If playing a disc, press the STOP button twice so that “STOP”, appears on the display. 
  Press and hold...

21
eNG
●  CONNeCTIONS
CONNeCTING eXTerNAL COMPONeNTS
 Connecting an external Analogue Component
Analogue signal components such as a VCR.
 Connect AUX IN  (Audio) on the Home Cinema to the Audio Out of the ext\
ernal Analogue      
1. 
           component.
   Be sure to match connector colours.  
•	
 
Press the 
2.  AUX button on the remote control to select AUX  input. 
You can also use the
•	  FUNCTION button on the main unit.  
           The mode switches as follows :   
           USB➞ FM➞ DVD/CD...

22
Connections
CONNeCTING THe FM ANTeNNA
      Connect the FM antenna supplied to the FM 75
1.  Ω COAXIAL Jack.
     Slowly move the antenna wire around until you find a location where reception is good, then fasten    
2. 
   it to a wall or other rigid surface.  
 
M   This unit does not receive AM broadcasts.   
`
 
Cooling Fan
The cooling fan supplies cool air to the unit to  prevent overheating.
Please observe the following cautions for your safety.
Make sure the unit is well-ventilated. If the unit...

23
eNG
The DVD Home Theater's remote can be used to control Samsung TV's.
Plug the main unit's power cord into the AC power supply.
1. 
Press the 
2.  DVD reCeIVer button to operate the DVD Home Theater. 
 
Press the 
3.  FUNCTION button on the main unit or DVD button  
on the remote to enable DVD/CD playback. 
Press the 
4.  TV button to set the remote to TV mode. 
Press the 
5.  POWer button to turn on your Samsung TV 
 with this remote.  
Press the 
6.  SOUrCes button to select VIDEO mode...

Playback
24
DISC PLAYBACK
dB
 
Press the 
1.  OPeN/CLOSe (    )  button to open the disc tray.
Load a disc.
2. 
Place a disc gently into the tray with the disc’s label 
•	
facing up.
Close the compartment by pressing the 
3.  OPeN/CLOSe (    ) 
button again.
Playback starts automatically.
•	
 
To stop playback, press the STOP (
)  button during playback.
 
If pressed once, 
•	 PreSS PLAY is displayed and the stop position will be stored in memory.    
If the PLAY (
) button or eNTer button is pressed,...

25
eNG
●  PLAYBACK
MP3/WMA-CD PLAYBACK
Data CDs (CD-R, CD-RW) encoded in MP3/WMA format can be played.
A
Place the MP3/WMA disc on the disc tray.
1. 
The MP3/WMA menu screen will appear and  
•	
playback will start.
The appearance of the menu depends on the  
•	
MP3/WMA disc.
  WMA-DRM files cannot be played.
•	
In Stop mode, use the Cursor 
2.  , , ,  button   
to select the album, and then press the eNTer button.
Use the Cursor 
•	 ,  button to select the track.
To change the album, use the...

Playback
26
JPeG FILe PLAYBACK
Images captured with a digital camera or camcorder, or JPEG files on a PC can be stored on a CD and then played back 
with this Home Theater.
Slide Mode G
Place the JPEG disc on the disc tray. 
Playback starts automatically. Each image is displayed  
•	
for 5 seconds and then the next image is displayed.
Press the [,]  button to skip to the next slide. 
Each time the button is pressed, the slide moves backward or forward.
•	
rotate/Flip Function G
Press the Cursor  , ,...

27
eNG
●  PLAYBACK
DIVX PLAYBACK
The functions on this page apply to DivX disc playback.
Skip Forward/Back D
During playback, press the [,] button. 
Goes to the next file whenever you press the 
•	 ] 
button,   
if there are over 2 files in the disc. 
Goes to the previous file whenever you press the   
•	
[  button, if there are over 2 files in the disc.
Fast Playback D
During playback, press the ( ,) button.  
To play back the disc at a faster speed, press the (  or ) button during playback. 
Each time...

Playback
28
If the Disc has more than One Subtitle File D
If the disc has more than one subtitle file, the default 
subtitle may not match the movie and you will have to 
select your subtitle language as follows:
In Stop mode, press the Cursor 
1.  ,  button, select the 
desired subtitle (
) from the TV screen, and then press 
the eNTer button.
When you select the desired DivX file from the TV screen, 
2. 
the movie will be played normally.
DivX(Digital internet video eXpress) 
DivX is a video file...

29
eNG
●  PLAYBACK
USING THe PLAYBACK FUNCTION
Displaying Disc Information dBAGD
You can view disc playback information  on the TV screen. 
 
Press the INFO button.
 
MDepending on the disc, the disc information display  
`
may appear different.
Depending on the disc, you can also select  DOLBY DIGITAL, or PRO LOGIC.
 
`
 
  appears on the TV screen! 
If this symbol appears on the TV screen when pressing   
a button, that operation is not possible with the disc   
currently being played.
Checking the...