Samsung Ht Z120t User Manual

							40
System setup
SeTTING THe TV SCreeN TYPe 
Depending on your TV type (Widescreen or conventional 4:3), you can select the TV's aspect ratio. 
In Stop mode, press the 
1.  MeNU button.
Press the Cursor 
2. 
% button to move to Setup and then press the   
eNTer button.
Press the Cursor 
3. 
% button to move to TV DISPLAY and then   
press the eNTer button.
Press the Cursor 
4. 
$,% button to select the desired item   
and then press the eNTer button.
Once the setup is complete, you will be taken to the   
•	
previous screen.
d Press the reTUrN button to return to the previous level.  
d Press the eXIT button to exit the setup screen.
Adjusting the TV Aspect ratio (Screen Size)
The horizontal to vertical screen size ratio of conventional TV's is 4:3, while that of widescreen and high 
definition TV's is 16:9. This ratio is called the aspect ratio. When p\
laying DVDs recorded in different 
screen sizes, you should adjust the aspect ratio to fit your TV or monito\
r.  
 
For a standard TV, select either 4:3PS or 4:3LB option according to personal preference.   
Select WIDe/HDTV if you have a widescreen TV.
4:3PS (4:3 Pan&Scan)   
Select this to play a 16:9 picture in the pan & scan mode on a conventional 
T V.
You can see the central portion of the screen only (with the sides of the 16:9 
•	
picture cut off).
4:3LB (4:3 Letterbox)   
Select this to play a 16:9 picture in the letter box mode on a conventional TV.
Black bars will appear at the top and bottom of the screen.
•	
WIDe/HDTV   
Select this to view a 16:9 picture in the full-screen mode on your widescreen 
T V.
You can enjoy the widescreen aspect.  
•	
 
 
 
MIf a DVD is in the 4:3 ratio, you cannot view it in widescreen. 
`
Since DVD discs are recorded in various image formats, they will look different depending  
`
on the software, the type of TV, and the TV aspect ratio setting.
DIVX(R) REGISTRATION
MOVE ENTER EXIT
RETURN
MOVE SELECT EXIT
RETURN
 
						

							41
eNG
●  SYSTeM SeTUP
SeTTING PAreNTAL CONTrOLS (rATING LeVeL)
Use this to restrict playback of adult or violent DVDs you do not want 
children to view.
In Stop mode, press the 
1.  MeNU button.
Press the Cursor 
2. 
% button to move to Setup and then press the 
eNTer button.
Press the Cursor 
3. 
% button to move to PAreNTAL and then press 
the eNTer button.
Press the Cursor 
4. 
$,% button to select the desired rating level and 
then press the eNTer button.
If you have selected Level 6, you cannot view DVDs with Level 7 
•	
or higher.
The higher the level, the closer the content is to violent or adult 
•	
material.
5.    Enter the password and then press the eNTer button.
The password is set to "7890" by default.
•	
Once the setup is complete, you will be taken to the previous screen.  
•	
d Press the reTUrN button to return to the previous level.
d 
Press the eXIT button to exit the setup screen.
 
MThis function works only if a DVD disc contains the rating level informa\
tion.   
`
SeTTING THe P ASSWOrD
You can set the password for the Parental (rating level) setting.
In Stop mode, press the 
1.  MeNU button.
Press the Cursor 
2. 
% button to move to Setup and then press the   
eNTer button.
Press the Cursor 
3. 
% button to move to PASSWOrD and then   
press the eNTer button.
Press the 
4.  eNTer button.
Enter the password and then press the 
5.  eNTer button.
Enter the old password, a new password, and confirm new password.
•	
The setting is complete. 
•	
 
MThe password is set to "7890" by default. 
`
If you have forgotten the rating level password, do the following
While the player is in No Disc mode, hold the main unit's 
•	 STOP (    ) button for longer than   
5 seconds. INITIAL appears on the display and all settings will return to the default values.
Press the 
•	 POWer button.
Using the RESET function will erase all stored settings. 
Do not use this unless necessary.
MOVE SELECT EXIT
RETURN
DIVX(R) REGISTRATION
MOVE ENTER EXIT
RETURN
DIVX(R) REGISTRATION
MOVE ENTER EXIT
RETURN
MOVE SELECT EXIT
RETURN
 
						

							42
System setup
SeTTING THe WALLPAPer
 dG
While watching a DVD or JPEG CD, you can set the image you like as backg\
round wallpaper.  
During playback, press the 
1.  PAUSe button when  
an image you like appears.
Press the 
2.  LOGO button.
COPY LOGO DATA
•	  will be displayed on the TV screen.
The power will turn off and then back on.
3. 
The selected wallpaper will be displayed. 
•	
You can select up to 3 wallpaper settings. 
•	
TO SeLeCT ONe OF THe 3 W ALLPAPer SeTTINGS YOU'Ve MADe
In Stop mode, press the 
1.  MeNU button.
Press the Cursor 
2. 
% button to move to Setup and then press the eNTer button.
Press the Cursor 
3. 
% button to move to LOGO and then press the eNTer button.
Press the Cursor 
4. 
$,% button to select the desired USer, 
and then press the eNTer button.
This selects one of the 3 wallpaper screens.
•	
5.    Press the eXIT button to exit the setup screen.
OrIGINAL 
•	 : Select this to set the Samsung Logo image as   
                     your wallpaper.
USer 
•	 : Select this to set the desired image as your  
             wallpaper.  
 
d Press the reTUrN button to return to the previous level.
d Press the eXIT button to exit the setup screen.
COPY LOGO DATA
MOVEENTER EXIT
RETURN
MOVE SELECT EXIT
RETURN
  
						

							43
eNG
●  SYSTeM SeTUP
SeTTING THe SPeAKer MODe
 
Signal outputs and frequency responses from the speakers will 
automatically be adjusted according to your speaker configuration and 
whether certain speakers are used or not.In Stop mode, press the 
1.  MeNU button.
Press the Cursor 
2. 
% button to move to Audio and then press the 
eNTer button.
In the 
3.  SPeAKer SeTUP, press the eNTer button again.
Press the Cursor 
4.  , , ,  button to move to the desired speaker 
and then press the eNTer button.
For C, 
•	SL, and SR, each time the button is pressed, the mode switches 
alternately as follows : SMALL 
➞ NONE.
For L and R, the mode is set to SMALL.
•	
SMALL 
•	 :  Select this when using the speakers.
NONe 
•	 : Select this when no speaker is connected.
d Press the reTUrN button to return to the previous level.
d Press the eXIT button to exit the setup screen.
 
MDepending on PRO LOGIC and STEREO settings, the speaker mode may vary (\
see page 51).   
`
 
SeTTING THe DeLAY TIMe
 
If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay 
time of the audio signals from the centre and rear speakers.
In Stop mode, press the 
1.  MeNU button.
Press the Cursor 
2. 
% button to move to Audio and then press the eNTer button.
Press the Cursor 
3. 
% button to move to DeLAY TIMe and then press the eNTer button.
Press the Cursor  
4.  , , ,  button to move to the desired speaker and then press the eNTer button.
5.    Press the Cursor   ,  to set the Delay time.
You can set the delay time for C between 00 and 05mSEC and for SL and SR \
between 00 and 15mSEC.
•	
d Press the reTUrN button to return to the previous level.
d Press the eXIT button to exit the setup screen.
MOVE ENTER EXIT
RETURN
MOVE CHANGE EXIT
RETURN
DivX (r) registration
Please use the Registration code to register this player with the DivX (R) video on demand format. 
To learn more, go to www.divx.com/vod.
 
						

							44
System setup
When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance betwe\
en you and each 
speaker is the same.  
Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can 
adjust this difference by adding a delay effect to the sound of the Centre and Rear Speakers.
Setting Centre SPeAKer
If the distance of Dc is equal to or longer than the   
distance of Df in the figure, set the mode as 0ms.   
Otherwise, change the setting according to the table.
Distance  between   
Df and Dc 0.00 m 0.34 m0.68 m1.06 m1.40 m1.76 m
Delay Time0 ms 1 ms2 ms3 ms4 ms5 ms
Setting reAr SPeAKer
If the distance of Dc is equal to or longer than the distance of Dr 
in the figure, set the mode as 0ms.   
Otherwise, change the setting according to the table.
Distance  between 
Df and Dc 0.00 m 1.06 m2.11 m3.16 m3.62 m5.29 m
Delay Time0 ms 3 ms6 ms9 ms12 ms 15 ms
 
MWith  
`  PL II (Dolby Pro Logic II), the delay time may be different for each mode.
With AC-3 , the delay time can be set between 00 and 15mSEC. 
`
The Centre channel is only adjustable on 5.1 channel discs. 
`
Ideal Centre SPEAKER 
placement
Df: The distance from FRONT SPEAKER
Dc: The distance from Centre SPEAKER
Dr: The distance from REAR SPEAKER It is desirable to place all speakers within this circle. Ideal 
 
REAR   
SPEAKER 
placement
Setting up the Speaker Delay Time
 
						

							45
eNG
●  SYSTeM SeTUP
SeTTING THe TeST TONe
Use the Test Tone feature to check the speaker connections.In Stop mode, press the 
1.  MeNU button.
Press the Cursor 
2. 
% button to move to Audio and then press the 
eNTer button.
Press the Cursor 
3. 
% button to move to TeST TONe and then press 
the eNTer button.
The test tone will be sent to 
•	 L ➞ C ➞  r ➞ Sr ➞  SL ➞ SW in 
order.   
If the eNTer button is pressed again at this time, the test tone 
will stop.
d Press the reTUrN button to return to the previous level.
d Press the eXIT button to exit the setup screen.
 
SeTTING THe AUDIO
You can adjust the balance and level for each speaker. In Stop mode, press the 
1.  MeNU button.
Press the Cursor 
2. 
% button to move to Audio and then press the 
eNTer button.
Press the Cursor 
3. 
% button to move to SOUND eDIT and then press 
the eNTer button.
Press the Cursor 
4. 
 , button to select and adjust the desired item.  
Press the Cursor 
 , button to adjust the settings.  
d Press the reTUrN button to return to the previous level.
d Press the eXIT button to exit the setup screen.
MOVE ENTER EXIT
RETURN
MOVE CHANGE EXIT
RETURN
MOVE ENTER EXIT
RETURN
STOP EXIT
 
						

							46
System setup
SeTTING THe AUDIO
Press the SOUND eDIT button and then press the Cursor , button.
Adjusting Front/rear Speaker Balance
You can select between 0, -6, and OFF. 
`
The volume decreases as you move closer to –6.   
`
Adjusting Centre/rear/Subwoofer Speaker Level
The volume level can be adjusted in steps from +6dB to –6dB. 
`
The sound gets louder as you move closer to +6dB and quieter as you get \
closer to -6dB. 
`
SeTTING THe DrC (DYNAMIC rANGe COMPreSSION)
This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby 
Digital sound when watching movies at low volume at night.
In Stop mode, press the 
1.  MeNU button.
Press the Cursor 
2. 
% button to move to  Audio and then press the 
eNTer button.
Press the Cursor 
3. 
% button to move to DrC and then press the 
eNTer button.
Press the Cursor 
4. 
 , to adjust the DrC.
When the Cursor 
•	
 button is pressed, the effect is greater, 
and when the Cursor 
 button is pressed, the effect is 
smaller.  
d Press the reTUrN button to return to the previous level.
d Press the eXIT button to exit the setup screen.
Manually Adjusting the Speaker Volume and Balance with the SOUND eDIT Button.
RETURN
MOVE ENTER EXIT
CHANGE EXIT
RETURN
 
						

							47
eNG
●  SYSTeM SeTUP
SeTTING THe AV SYNC
Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to 
match the video.In Stop mode, press the 
1.  MeNU button.
Press the Cursor 
2. 
% button to move to Audio and then press the 
eNTer button.
Press the Cursor 
3. 
% button to move to AV-SYNC and then press 
the eNTer button.
Press the Cursor 
4. 
 , button to select the AV-SYNC Delay Time  
and then press the eNTer button.
You can set the audio delay time between 0 ms and 300 ms. Set 
•	
it to the optimal status.  
d Press the reTUrN button to return to the previous level.
d Press the eXIT button to exit the setup screen.  
 
 MOVE ENTER EXIT
RETURN
MOVE SELECT EXIT
RETURN
 
						

							48
System setup
SOUND FIeLD (DSP)/eQ FUNCTION
DSP(Digital Signal Processor) : DSP modes have been designed to simulate different acoustic environments. 
EQ : You can select ROCK, POPS  to optimize the sound for the genre of music you are playing
Press the DSP/EQ button.
DSP
•	  appears on the display panel.
Each time the button is pressed, the selection changes as follows:
POPS  ➞ JAZZ   ➞ rOCK  ➞ STUDIO  ➞ CLUB  ➞ HALL  ➞ MOVIe  ➞ CHUrCH  ➞ PASS  
POPS, JAZZ, rOCK 
•	 : Depending on the genre of music, you can select POPS, JAZZ, and ROCK.
STUDIO 
•	 : Provides a sense of presence as if in a studio.
CLUB 
•	 : Simulates the sound of a dance club with a 
throbbing bass beat.
HALL 
•	 : Provides a clear vocal as if listening in a concert hall.
MOVIe 
•	 : Provides the feeling of a movie theater.
CHUrCH 
•	 : Gives the feel of being in a grand church. 
PASS 
•	 : Select this for normal listening.
 
MThe DSP/EQ function is only available in STEREO mode.   
`
Press thePL II mode button to show STEREO on the display.
This feature works with CDs, MP3-CDs,  DivX, tuner and Dolby Digital discs. 
`
When playing a DVD disc encoded with two or more channels, multi-channel mode will be  
`
selected automatically and DSP/EQ function does not work.
DOLBY PrO LOGIC II MODe
You can select the desired Dolby Pro Logic II audio mode.
Press the PL II MODe button.
Each time the button is pressed, the mode changes as follows.
•	 
MUSIC  ➞ CINeMA  ➞ PrO LOGIC  ➞  MATrIX  ➞  
STereO  ➞  MUSIC
PrO LOGIC II
MUSIC 
•	 : When listening to music, you can experience  
               sound effects as if you are listening to the actual 
performance.
CINeMA
•	  : Adds realism to the movie soundtrack.
PrO LOGIC
•	  :  You will experience a realistic multi-channel effect, as if using five speakers, while using 
just the front left and right speakers.
MATrIX 
•	 : You will hear 5.1 channel surround sound.
STereO 
•	 : Select this to listen to sound from the front left and right speakers and the subwoofer only.
 
MWhen selecting Pro Logic II mode, connect your external device to the AUDIO INPUT jacks    
`
(L and R) on the player. If you connect to only one of the inputs (L or R), you cannot listen\
 
to surround sound.
PRO LOGIC II function is only available in STEREO mode.
 
`
   
						

							49
eNG
●  SYSTeM SeTUP
DOLBY PrO LOGIC II eFFeCT
This function works only in Dolby Pro Logic MUSIC mode.
Press the 
1. PL II MODe button to select MUSIC mode.
Press the 
2. 
PL II eFFeCT button.
Press the 
3. 
 , buttons to select the desired effect setting.
PANORAMA : You can select either 0 or 1.
•	
C- WIDTH : You can select between 0 and 7.
•	
DIMENS : You can select between 0 and 6.
•	
P.BASS 
The P.BASS function provides a bass boost to reinforce the low frequencies.
Press the 
1.  P.BASS button to select P.BASS mode.
Press the P.Bass button again to turn off the P.Bass 
2. 
mode.  
 
 
 
 
 
 
 
MThe P.BASS function is only available with 2 channel LPCM sources such as mp3,Divx,cd   
`
and wma. Press P.BASS button and "POWER BASS ON" will be displayed on the screen.
The P.bass does not work with DSP/EQ or DOLBY PRO LOGIC ll modes.  
 
`
If you press P.BASS in the DSP/EQ mode, the DSP/EQ mode is automatically shut off and 
the P. BASS function comes on.
CONNeCTING MICrOPHONe
 
You can enjoy the feeling of a karaoke bar in the comfort of your home.   
Watch the video and sing along the lyrics displayed on  the TV screen against the accompaniment.
Connect the microphone to the MIC jack on the front panel.
1. 
You can connect up to two microphones.
•	
Press the 
2.  MIC VOL button to adjust the voice volume of the microphone.
Press the 
3.  eCHO button to adjust the echo level of the microphone.
STANDBYFUNC.MIC 2
MIC 1MIC VOL
MIN MAX