Samsung Ht Tz325r User Manual

11
ENG
●  DESCrIPTION●  DESCrIPTION
rEAr PANEL
TX CARD CONNECTION (WIRELESS)  The TX card enables communication between the main unit and the 
wireless receiver amplifier.(The wireless module is not provided for 
HT-Z320/TZ322/TZ325 )
HDMI OUT JACK  
  Use the HDMI cable, connect this HDMI output terminal to the HDMI input 
terminal on your TV for the best quality picture.
External Digital Optical Input Jack
Use this to connect external equipment capable of digital output.
VIDEO OUTPUT JACKConnect your...

12
Remote control
TOUr OF THE rEMOTE CONTrOL
2
1
36
35
34
33
32
31
30
29
28
27
26
25
23
24
22
21
20
19
17
16 15 14
13 12 11 10 98
7
6
5 4 337
18
38
39
40
Downloaded from TheatreSystem-Manual.com Manuals 

13
ENG
●  rEMOTE CONTrOL●  rEMOTE CONTrOL
Insert Remote batteries
1. Remove the battery 
cover in the direction 
of the arrow. 2. 
  Insert two 1.5v AAA batteries, paying 
attention to the correct polarities  
(+ and –). 3. 
Replace the battery 
cover. 
 
MFollow these precautions to avoid leaking or cracking cells:
Place batteries in the remote control so they match the polarity : (+) to (+) and (–) to (–).\
 
`
    Use the correct type of batteries. Batteries that look similar may differ in voltage....

14
Operation range of the remote Control
The remote control can be used up to approximately 7 meters in a 
straight line. 
It can also be operated at a horizontal angle of up to 30° from the 
remote control sensor.
When operating a TV with the remote control
1.    Press the TV button to set the remote to TV mode. 
2.    Press the POWEr button to turn on the TV.
3.  While holding down the POWEr button, enter the       
     code corresponding to your brand of TV.
If there is more than one code listed for...

15
ENG
●  rEMOTE CONTrOL●  rEMOTE CONTrOL
TV Brand Code List
Admiral (M.Wards)A MarkAnam
AOC
Bell & Howell (M.Wards)
Brocsonic Candle
Cetronic Citizen
Cinema Classic
Concerto Contec
Coronado Craig
Croslex Crown
Curtis Mates CXC
Daewoo
Daytron
Dynasty
Emerson FisherFunai
Futuretech
General Electric (GE) Hall MarkHitachi
Inkel
JC Penny JVC
KTV
KEC
KMC
LG (Goldstar) Luxman
LXI (Sears)
Magnavox MarantzMatsui MGA
Mitsubishi/MGA
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30...

16
Connections
CONNECTING THE SPEAKErS
Position of the DVD Player
Place it on a stand or cabinet shelf.
Selecting the Listening PositionThe listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV.  
Example :   
For 32" TV's 2~2.4m (6~8feet)       
For 55" TV's 3.5~4m (11~13feet)
Front SpeakerseiPlace these speakers in front of your listening position, facing inwards (about 45°) toward you.
Place the speakers so that their...

17
ENG
●  CONNECTIONS●  CONNECTIONS
Speaker Components
HT-Z320
SUBWOOFER CENTRE 
CENTRE SPEAKER CABLE 
SPEAKER CABLE  
CENTRE 
REAR 
(L)(R)
FRONT 
(L)(R)
SUBWOOFER
 STAND BASE STAND FRONT 
SCREW (Large): 2EA 
SCREW (Small): 10EA 
HT-TZ322
(L)(L)
(R)
(R)
SUBWOOFER STAND BASE 
FRONT 
SCREW (Large): 4EA SCREW (Small): 20EA 
(L)(R)
STAND
 
REAR 
HT-TZ325
REAR 
(L)(R)
 

18
Connections
HT-Z420
SUBWOOFER 
CENTRE 
CENTRE 
(AH81-04973A)
SUBWOOFER STAND BASE STAND FRONT 
SCREW (Large): 2EA 
SCREW (Small): 10EA 
HT-TZ422
(L)(L)
(R)
(R)
SUBWOOFER STAND BASE 
FRONT 
SCREW (Large): 4EA SCREW (Small): 20EA 
(L)(R)
STAND
 
REAR 
HT-TZ425
REAR 
(L)(R)
Speaker Components
CENTRE 
FRONT  
CRADLE STAND/  
WALL MOUNT
FRONT 
(L) (R)
REAR 
(L)(R)
SPEAKER CABLE  
SPEAKER CABLE 
SPEAKER CABLE 
 

19
ENG
●  CONNECTIONS●  CONNECTIONS
Installing the Cradle Stand 
1.   Insert the stand so that it fits into the hole  
     as described in the figure.
2.    Turn the stand clockwise to lock it.  
     (Turning it counter-clockwise will loosen it.)
3.  This is the completion of the stand  
    installation.
 
3 2 1
HT-Z420   - Front Speakers
Front/rear Tallboy Stand
 
Turn the 
1.  STAND upside-down and connect 
it to the STAND BASE.
Insert five small 
2.  SCrEWS into the five holes 
marked with arrows...

20
Connections
Front Speakers Wall Mount Installation
3.  Use the wall mount hole (bracket) to install
     the speaker on the wall.3
Installing the Wall Mount
 
1.   Insert the wall mount so that it fits into the 
rear hole of the speaker as in the figure.
2.    Turn the wall mount counter clockwise to   
fix it. (This is in the reverse direction of the 
cradle stand installation.)
2 1
 
 
MMake sure the speaker is hung properly to avoid accidents or injury. 
`
HT-Z420   - Front Speakers
Connecting the...