Samsung Ht Tz325r User Manual

61
ENG
●  SYSTEM SETUP●  SYSTEM SETUP
ASC (Auto Sound Calibration) SETUP
By setting the ASC function just once when you relocate or install the unit, you can have the unit 
automatically recognize the distance between speakers, levels between channels, and frequency 
characteristics to create a 5.1-channel sound field optimized for your environment.
 
M     ASC SETUP can be made when there is no disc in the unit. 
`
Because the volume level of the tone is fixed during the ASC setup, yo\
u cannot adjust...

62
ASC (Auto Sound Calibration) SETUP 
Plug the ASC microphone into the ASC input jack.
1. 
Place the ASC microphone at the listening position.
2. 
Press 
3.  ASC button.
To create the optimal 5.1 channel sound field, the 
•	
selections are in the following sequence:   
L  ➞  C  ➞ r  ➞  Sr  ➞ SL  ➞ SW  
When the message "REMOVE MIC" appears in the 
4. 
display, unplug the ASC microphone.
 
M    
Setting the ASC function takes about 3 minutes. 
`
To cancel the ASC (Auto Sound Calibration) setup,...

63
ENG
LISTENING TO rADIO
remote Control 
Press the
1.   TUNEr button to select the FM band.
Tune in to the desired station.
2. 
Automatic Tuning 1
•	  : When the [,]  button is 
pressed, a preset broadcast station is selected.
Automatic Tuning 2
•	  : Press and hold the ,
,. 
button to automatically search for active 
broadcasting stations.
Manual Tuning
•	  : Briefly press the ,
,.
 button to 
increase or decrease the frequency incrementally.  
Main Unit 
Press the 
1.  FUNCTION button to select the FM...

64
ABOUT rDS BrOADCASTING    
Using the rDS (radio Data System) to receive FM stations 
RDS allows FM stations to send an additional signal along with 
their regular program signals. For example, the stations send 
their station names, as well as information about what type of 
program they broadcast, such as sports or music, etc.
Description on rDS function
PTY (Program Type) : Displays the type of programme currently being 
•	
broadcast
PS NAME (Program Service Name) :   Indicates the name of...

65
ENG
●  rADIO
PTY (Program Type) indication and PTY-SEArCH function 
One of the advantages of the RDS service is that you can locate a partic\
ular kind of program from 
the preset channels by specifying the PTY codes.
To search for a program using the PTY codes
Before you start, remember...
The PTY Search is only applicable to preset stations.
•	
To stop searching any time during the process, press 
•	 PTY SEArCH while searching.
There is a time limit in doing the following steps. If the setting is...

66
SLEEP TIMEr FUNCTION
You can set the time that the Home Cinema will shut itself off.
Press the SLEEP button.
SLEEP
•	  will be displayed. Each time the button is pressed, the 
preset time  in minutes changes as follows :  
10 
➞ 20 ➞ 30 ➞ 60 ➞ 90 ➞ 120 ➞ 150 ➞ OFF.  
To confirm the sleep timer setting, press the SLEEP  
button.
The remaining time before the Home Cinema will shut itself off 
•	
is displayed.
Pressing the button again changes the sleep time from what 
•	
you have set earlier.  
  
To...

67
ENG
CD rIPPING
Converts audio sound of the CD into a MP3 file format before sending to a USB storage device.
B
Connect the USB device.
1. 
Insert the audio CD into the CD tray.
2. 
Press the 
3.  CD RIPPING button.
To start ripping the current track, press the 
•	 CD 
RIPPING button on the remote control while the 
system is playing a track or stopped temporarily.
To rip the entire CD, press and hold the 
•	 CD RIPPING 
button on the remote control.
   -"FULL CD RIPPING" appears on the display...

68
Troubleshooting
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed 
below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact the nearest 
authorized dealer or Samsung Customer Service Centre.
SYMPTOMCheck/remedy
Disc tray does not open. • Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
Playback does not start   
immediately when the...

69
ENG
●  TrOUBLESHOOTING
SYMPTOMCheck/remedy
Audio language and subtitles do 
not work. • 
  Audio language and subtitles will not work if the disc does 
not contain them.
Menu screen does not appear 
even when the menu function is 
selected. • Are you using a disc that does not contain menus?
Aspect ratio cannot be changed. •   You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER 
BOX mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be 
seen in 4:3 ratio only. Refer to the DVD disc jacket and then 
select...

70
Language code list
Enter the appropriate code number for the initial settings “Disc Audio”, “Dis\
c Subtitle” and/or “Disc Menu”  
(See page 50).
Code Language CodeLanguage CodeLanguage CodeLanguage
1027 Afar1181Frisian 1334Latvian, Lettish 1506Slovenian
1028 Abkhazian 1183Irish1345Malagasy 1507Samoan
1032 Afrikaans 1186Scots Gaelic 1347Maori 1508Shona
1039 Amharic 1194Galician 1349Macedonian 1509Somali
1044 Arabic 1196Guarani 1350Malayalam 1511Albanian
1045 Assamese 1203Gujarati 1352Mongolian...