Samsung Ht Tz325r User Manual

							11
ENG
●  DESCrIPTION●  DESCrIPTION
rEAr PANEL
TX CARD CONNECTION (WIRELESS)  The TX card enables communication between the main unit and the 
wireless receiver amplifier.(The wireless module is not provided for 
HT-Z320/TZ322/TZ325 )
HDMI OUT JACK  
  Use the HDMI cable, connect this HDMI output terminal to the HDMI input 
terminal on your TV for the best quality picture.
External Digital Optical Input Jack
Use this to connect external equipment capable of digital output.
VIDEO OUTPUT JACKConnect your TV's Video Input jack (VIDEO IN) to the VIDEO OUT jack.
AUX IN 2 JACKSConnect to the 2CH Analogue output of an external device (such as a 
VCR).
SCART JACK
Connect to a TV with scart input jack.
FM 75Ω COAXIAL JACKConnect the FM antenna.
COOLING FAN The fan always revolves when the power is on. Ensure a minimum of 
 
4 inches of clear space on all sides of the fan when installing the 
product.
9SPEAKER OUTPUT CONNECTORS Connect the front, centre,rear speakers and subwoofer.
 
(HT-Z420/TZ422/TZ425 does not have rear speaker connectors on the 
main unit,the rear speakers are connected to the Wireless module.)
10CLAMP-WIRE  Fasten the speaker wires.
FM ANT
FM ANT
21
9810
36457
Downloaded from TheatreSystem-Manual.com Manuals  
						

							12
Remote control
TOUr OF THE rEMOTE CONTrOL
2
1
36
35
34
33
32
31
30
29
28
27
26
25
23
24
22
21
20
19
17
16 15 14
13 12 11 10 98
7
6
5 4 337
18
38
39
40
Downloaded from TheatreSystem-Manual.com Manuals 
						

							13
ENG
●  rEMOTE CONTrOL●  rEMOTE CONTrOL
Insert Remote batteries
1. Remove the battery 
cover in the direction 
of the arrow. 2. 
  Insert two 1.5v AAA batteries, paying 
attention to the correct polarities  
(+ and –). 3. 
Replace the battery 
cover. 
 
MFollow these precautions to avoid leaking or cracking cells:
Place batteries in the remote control so they match the polarity : (+) to (+) and (–) to (–).\
 
`
    Use the correct type of batteries. Batteries that look similar may differ in voltage. 
`
Always replace both batteries at the same time. 
`
Do not expose the batteries to heat or a flame. 
`
21 OPEN/CLOSE button
22
 DVD  DVD button
 
DVD  TUNER button
 DVD
  AUX button
23POR
T button
24RDS Selection buttons
25SUBTITLE
26PAUSE button
 PLAY button
 STOP button
SEARCH buttons
MUTE button
TUNING/CH button
REMAIN button
RETURN button
EXIT  button
CANCEL button
SOUND EDIT button
REPEAT button 
SLEEP button
DSP/EQ button
P.BASS button
DIMMER button
ASC button
POWER button
 
DVD RECEIVER button
TV button
Number (0~9) buttons
AUDIO     
STEP button
Tuning Preset/CD Skip buttons
VOLUME button
MENU button
Cursor/ENTER button
INFO  button
PL II MODE button
TUNER MEMORY 
SD(Standard Definition)/HD(High 
Definition) button
ZOOM button
LOGO button
CD RIPPING  button 
  SLOW, MO/ST button
 
PL II EFFECT button
 SOURCE button
36
35
34 33
32
31
30
29
28
27
19
20 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2
1
3718
38
39
40
Downloaded from TheatreSystem-Manual.com Manuals 
						

							14
Operation range of the remote Control
The remote control can be used up to approximately 7 meters in a 
straight line. 
It can also be operated at a horizontal angle of up to 30° from the 
remote control sensor.
When operating a TV with the remote control
1.    Press the TV button to set the remote to TV mode. 
2.    Press the POWEr button to turn on the TV.
3.  While holding down the POWEr button, enter the       
     code corresponding to your brand of TV.
If there is more than one code listed for your TV in 
•	
the table, enter one at a time to determine which 
code works.
    Example : For a Samsung TV  
While holding down the POWEr button, use the 
number buttons to enter 00, 15, 16, 17 or 40.  
4.   If the TV turns off, the setting is complete.   
You can use the TV POWER, VOLUME, CHANNEL, and Numeric buttons (0~9).
•	
 
M  The remote control may not work on some brands of TV's. Also, some operations may not  
`
be possible depending on your brand of TV.
     If you do not set the remote control with the code for your brand of TV, the remote control 
 
`
will work on a Samsung TV by default.
FUNC.
SETTING THE rEMOTE CONTrOL
You can control certain functions of your TV with this remote control.
Remote control
   
						

							15
ENG
●  rEMOTE CONTrOL●  rEMOTE CONTrOL
TV Brand Code List
Admiral (M.Wards)A MarkAnam
AOC
Bell & Howell (M.Wards)
Brocsonic Candle
Cetronic Citizen
Cinema Classic
Concerto Contec
Coronado Craig
Croslex Crown
Curtis Mates CXC
Daewoo
Daytron
Dynasty
Emerson FisherFunai
Futuretech
General Electric (GE) Hall MarkHitachi
Inkel
JC Penny JVC
KTV
KEC
KMC
LG (Goldstar) Luxman
LXI (Sears)
Magnavox MarantzMatsui MGA
Mitsubishi/MGA
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
56, 57, 58
01, 15
01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11,  12, 13, 14
01, 18, 40, 48 57, 58, 8159, 6018
03
03, 18, 25 97
03
18
46
15
03, 05, 61, 82, 83, 84 62
03
59, 61, 63 03
02, 03, 04, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24,   
25, 26, 27, 28, 29, 30, 32, 34, 35, 36, 48, 59, 90
40
03
03, 15, 40, 46, 59, 61, 64, 82, 83, 84, 85 19, 6503
03
06, 40, 56, 59, 66, 67, 68 40
15, 18, 50, 59, 69
45
56, 59, 67, 86 70
59, 61, 87, 88 03, 15, 40 15
01, 15, 16, 17, 37, 38, 39, 40, 41, 42, 43, 44 18
19, 54, 56, 59, 60, 62, 63, 65, 71
15, 17, 18, 48, 54, 59, 60, 62, 72, 89 40, 5454
18, 40
18, 40, 59, 60, 75
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86MTC NEC
Nikei
Onking Onwa
Panasonic Penney
Philco
Philips
Pioneer
Portland Proton
Quasar
Radio Shack
RCA/Proscan RealisticSampo
Samsung
SanyoScott
Sears
Sharp
Signature 2000 (M.Wards) Sony
Soundesign Spectricon SSS
Sylvania
Symphonic
Tatung
Techwood TeknikaTMK
Toshiba Vidtech VidechWards
Yamaha York
Yupiteru Zenith
Zonda
Dongyang 18
18, 19, 20, 40, 59, 60 03
03
03
06, 07, 08, 09, 54, 66, 67, 73, 74 18
03, 15, 17, 18, 48, 54, 59, 62, 69, 90 15, 17, 18, 40, 48, 54, 62, 72 63, 66, 80, 91
15, 18, 59 40
06, 66, 67
17, 48, 56, 60, 61, 75
18, 59, 67, 76, 77, 78, 92, 93, 94 03, 1940
00, 15, 16, 17, 40, 43, 46, 47, 48, 49,   
59, 60, 98
19, 61, 65
03, 40, 60, 61 15, 18, 19
15, 57, 6457, 58
50, 51, 52, 53, 55
03, 4001
18
18, 40, 48, 54, 59, 60, 62 61, 95, 96
06
18
03, 15, 18, 25 18, 40
19, 57, 63, 71 18
59, 60, 69
15, 17, 18, 40, 48, 54, 60, 64
18
40
03
58, 79 01
03, 54
No.BrandCode No.BrandCode
 
						

							16
Connections
CONNECTING THE SPEAKErS
Position of the DVD Player
Place it on a stand or cabinet shelf.
Selecting the Listening PositionThe listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV.  
Example :   
For 32" TV's 2~2.4m (6~8feet)       
For 55" TV's 3.5~4m (11~13feet)
Front SpeakerseiPlace these speakers in front of your listening position, facing inwards (about 45°) toward you.
Place the speakers so that their tweeters will be at the same height as \
your ear.
Align the front face of the front speakers with the front face of the Centre speaker or place them slightly in front   
of the Centre speakers.
Centre Speaker  f
It is best to install it at the same height as the front speakers. You can also install it directly over or under the TV.
rear Speakers hj Place these speakers behind your listening position. If there isn't enough room, place these speakers so they face each 
other. Place them about 60 to 90cm (2 to 3feet) above your ear, facing slightly downward.
*    Unlike the front and Centre speakers, the rear speakers are used to handle mainly sound effects and sound will not 
come from them all the time.
Subwoofer 
The position of the subwoofer is not so critical. Place it anywhere you like.
This section involves various methods of connecting the Digital Home Cin\
ema to other external components. 
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
 
						

							17
ENG
●  CONNECTIONS●  CONNECTIONS
Speaker Components
HT-Z320
SUBWOOFER CENTRE 
CENTRE SPEAKER CABLE 
SPEAKER CABLE  
CENTRE 
REAR 
(L)(R)
FRONT 
(L)(R)
SUBWOOFER
 STAND BASE STAND FRONT 
SCREW (Large): 2EA 
SCREW (Small): 10EA 
HT-TZ322
(L)(L)
(R)
(R)
SUBWOOFER STAND BASE 
FRONT 
SCREW (Large): 4EA SCREW (Small): 20EA 
(L)(R)
STAND
 
REAR 
HT-TZ325
REAR 
(L)(R)
 
						

							18
Connections
HT-Z420
SUBWOOFER 
CENTRE 
CENTRE 
(AH81-04973A)
SUBWOOFER STAND BASE STAND FRONT 
SCREW (Large): 2EA 
SCREW (Small): 10EA 
HT-TZ422
(L)(L)
(R)
(R)
SUBWOOFER STAND BASE 
FRONT 
SCREW (Large): 4EA SCREW (Small): 20EA 
(L)(R)
STAND
 
REAR 
HT-TZ425
REAR 
(L)(R)
Speaker Components
CENTRE 
FRONT  
CRADLE STAND/  
WALL MOUNT
FRONT 
(L) (R)
REAR 
(L)(R)
SPEAKER CABLE  
SPEAKER CABLE 
SPEAKER CABLE 
 
						

							19
ENG
●  CONNECTIONS●  CONNECTIONS
Installing the Cradle Stand 
1.   Insert the stand so that it fits into the hole  
     as described in the figure.
2.    Turn the stand clockwise to lock it.  
     (Turning it counter-clockwise will loosen it.)
3.  This is the completion of the stand  
    installation.
 
3 2 1
HT-Z420   - Front Speakers
Front/rear Tallboy Stand
 
Turn the 
1.  STAND upside-down and connect 
it to the STAND BASE.
Insert five small 
2.  SCrEWS into the five holes 
marked with arrows using a screwdriver as 
shown in the illustration. 
 
Connect upper SPEAKER to the assembled 
3. 
STAND.
Insert another large 
4.  SCrEW into the hole on 
the rear of the speaker marked with arrow 
using a 
screwdriver. 
 
STAND BASE
STAND
12
34
How to Install the Speaker on the Stand
HT-TZ322/TZ422 - Front Speakers
HT-TZ325/TZ425 - Front/Rear Speakers
        
						

							20
Connections
Front Speakers Wall Mount Installation
3.  Use the wall mount hole (bracket) to install
     the speaker on the wall.3
Installing the Wall Mount
 
1.   Insert the wall mount so that it fits into the 
rear hole of the speaker as in the figure.
2.    Turn the wall mount counter clockwise to   
fix it. (This is in the reverse direction of the 
cradle stand installation.)
2 1
 
 
MMake sure the speaker is hung properly to avoid accidents or injury. 
`
HT-Z420   - Front Speakers
Connecting the Front, Centre,Rear and Subwoofer Speakers
Press down the terminal tab on the back of the speaker.   
1. 
Insert the black wire into the black terminal (–) and the red 
2. 
wire into the red terminal(+), and then release the tab.
Connect the other end of the speaker cable to the 
3. 
connecting jacks on the back of the Home Theatre and 
Wireless Receiving Module.
Make sure the colours of the connecting plugs match the connecting jacks.
•