Samsung Ht Ds100 Instruction Manual

CONNECTIONS
20
Converts the interlace signal to progressive to prevent flickering and to
remove distortion or noise on the edge of screen.
DCDi (Directional Correlational Deinterlacing)Function
Press and hold DCDibutton on the remote
control for over 3 seconds.
•Each time the button is pressed, the selection alternates between
DCDi ONand DCDi OFF.
 1p~44p(DS1000)-GB  9/16/04 9:14 AM  Page 23
 

Connecting External Components
21
Example: Digital signal components such as a Settop Box or CD Recorder.
Connecting an External Digital Component
Optical Cable
(not supplied)
Press AUXon the remote control to select ‘D.IN 1 or D.IN 2’.
•Each time the button is pressed, the selection changes as follows: D.IN 1➝D.IN 2➝AUX.
•You can also use the FUNCTIONbutton on the main unit.
The mode switches as follows: DVD/CD➝ D.IN 1➝D.IN 2➝ AUX➝ FM.
Connect the Digital In 1 or 2 (OPTICAL) on the main unit to the...

•To listen TV sound in 5.1 channel sound through the main unit, connect the Audio In on the
main unit to the Audio Output on the TV.
•You can connect Video Output jack on the VCR to the TV, and connect Audio Output jack on
the VCR to this product.
LR
22
Example: Analog signal components such as a VCR or TV.
Connecting an External Analog Component
Audio Cable (not supplied)
If the external analog component has only one Audio
Out, connect either left or right.
CONNECTIONS
Note
Press AUXon the remote...

23
1
2
Connecting the FM Antenna
FM antenna connection
Connect the FM antenna supplied to the FM 75ΩCOAXIAL terminal as a temporary
measure.
Slowly move the antenna wire around until you find a location where reception is
good, then fasten it to a wall or other rigid surface.
Press and hold NTSC/PALbutton on the remote controller for over 5 seconds while the power is turned off. 
•NTSC or PA L will appear in the display. 
At this time, press the NTSC/PALbutton shortly to select between NTSC and PA L....

24
CONNECTIONS23
Press the MODEbutton
so that the TV indicator
on the remote control
flashes.
TVDVD RECEIVER
TVDVD RECEIVER
Press the POWER
button to turn on
the TV.
56
Press the MODEbutton so
that the DVD RECEIVER
indicator on the remote
control flashes.Press DVDbutton
to select DVD/CD
mode.
1
Plug the power
cord into the AC
power supply.
4
Press TV/VIDEO
button to select
VIDEO mode.
Before Using Your DVD Player
Your DVD player is capable of playing DVD, VCD, CD, MP3 and JPEG discs.Depending on the...

2
1
Press OPEN/CLOSEbutton to open the
disc tray.
3
Press OPEN/CLOSEbutton to close the disc
window.
•The disc plays automatically when the disc window is closed.
•The disc menu may appear differently depending on the disc.
Insert the disc so that the printed side
faces up.
Disc Playback
•Depending on the content of the disc, the initial screen
may appear different.
•To resume playback, press PLAY/PAUSE(         )
button again.
To temporarily pause playback, 
press PLAY/PAUSEduring playback.
DVDVCDCD...

•In this manual, the instructions marked with DVD (               ) are applicable
to DVD-VIDEO, DVD-AUDIO, and DVD-R/RW discs.
Where a particular DVD type is mentioned, it is indicated separately.
•Depending on the content of the disc, the initial screen may appear different.
DVDNote
Groups and tracks (DVD-AUDIO)
•DVD-audios is divided into several large sections called groups and smaller
sections called tracks. Numbers are allotted to these sections. 
These numbers are called group numbers and track...

•Depending on the recording mode, some MP3-CDs may not play.
•Table of contents of a MP3-CD varies depending on the MP3 track format
recorded on the disc.Note
MP3-CD Playback
Data CDs (CD-R, CD-RW) encoded in MP3 format can be played.
2
In Stop mode, use     
to select
the album, and then
press the ENTER
button.
•The MP3 menu screen will appear and
playback will start.
•Depending on the MP3 disc, the
appearance of the menu may be different.
1
Press the
OPEN/CLOSEbutton
to open the disc tray,
and then...

28
JPEG Disc Playback
Images captured with a digital camera or camcorder, or JPEG files on a PC can be stored on a CD and then
played back with this unit.
Press the OPEN/CLOSEbutton to open the disc windows, and
then load the JPEG disc.
• Playback will start automatically and each image will show for 5 seconds before moving to
the next image.
Rotate vertically Rotate 90° counterclockwise
Rotate horizontally  Rotate 90° clockwise
During playback, press                    .
To rotate the image
OPERATION...

Fast playback
DivX Playback
Skip Forward/Back
During playback, press the              button.
•Go to the next file whenever you press           button, if there are over 
2 files in the disk. 
•Go to the previous file whenever you press           button, if there are over 
2 files in the disk. 
Press and hold                button. 
•Each time the button is held down during playback, 
the playback speed changes as follows:
29
•DIVX file can be zoomed
only in ZOOM X2 mode. Note
Zoom Function
2
Press...