Samsung Ht D7500w User Manual

							
0 English
English 1

04
Basic Functions

Playback of applications' contents through 
the product is not guaranteed. We 
recommend playing contents downloaded 
to the iPod.
If you have a problem using your iPod, 
please visit www.apple.com/support/ipod
How to Link the Wireless transmitter with the main unit
Turn off your Home Cinema.
Press the 4, 7, 6, 3 buttons on the remote 
control in order.
The Power LED blinks once.
Connect the iPod/iPhone to the Wireless 
transmitter.
STANDBYLINK
CHARGE
Turn on the iPod/iPhone. Press the "ID SET" 
button on the back of the Wireless 
transmitter for 5 seconds. The link light on 
the wireless transmitter blinks rapidly.
Turn on your product. 
To listen to music from your iPod/iPhone 
over the product, press the  button to 
select "W. iPod" mode.
After you select "W. iPod" mode, turn the 
volume of the product down to avoid hearing 
damage.
You can control the speaker volume of the 
iPod/iPhone with a volume wheel or a 
volume bar. 
When the iPod/iPhone is stopped or in a 
power saving mode, the Wireless transmitter 
enters Sleep Mode.
When iPod/iPhone is set to Deep Sleep 
Mode, the Wireless transmitter turns off.


1.
2.
•
3.
4.
5.
•
•
•
•
Operation status of the wireless 
transmitter's LED
CHARGE
STANDBYLINKCHARGE
STANDBY
LINK
Display
Function
LINK(Blue LED)STANDBY (Red LED)
LED ONPairing successfully completed STANDBY
LED  BLINK (Long blink)Processing iPod/iPhoneLOW BATTERY
LED  BLINK (Short blink) Processing pairingPairing failed
CAUTION
If you use a wireless device such as a laptop 
computer, an AP, or Wifi  , near the main home 
cinema unit, an unstable operation error can 
occur.
Do not pair the SWA-5000 and iPod/iPhone at 
the same time. If you pair them at the same 
time, the iPod/iPhone and SWA-5000 may not 
connect to the product.
The maximum transmission distance from the 
product to the wireless transmitter is about 
16.4 feet, but may vary depending on your 
operation environment.
The audio signal may be weakened or even 
lost where there is an obstacle such as a wall 
or partition between the product and wireless 
transmitter. You can also weaken or lose signal 
if you move the wireless transmitter around.
!




 
						

							
 English

Network Services

English 

You can enjoy various network services such as 
Smart Hub or BD-LIVE by connecting the 
product to your network.
Read the following instructions before using 
any network service.
Connect the product to the network.
(see pages 27~28)
Confi gure the network settings. 
(see pages 39~42)
1.
2.
using Smart Hub
Using Smart Hub, you can stream movies, 
videos, and music from the Internet, access 
various for pay or free-of-charge applications and 
view them on your TV. Application content 
includes news, sports, weather forecasts, stock 
market quotes, maps, photos, and games.
You can also start this function by 
pressing the SMART HUB button 
on the remote control.
Starting Smart Hub the First Time
To start Smart Hub for the fi rst time, follow these 
steps :
Go to the Home menu.
c Safely Remove USB   d WPS(PBC)
My DevicesInternetSettings
VideosPhotos
Music
My Contents
Function
Press the ◄► buttons to select Internet, 
and press the ENTER button.
1.
2.
The Smart Hub screen appears. 
NOTE
Certain applications are available only in certain 
countries.
The Terms of Service Agreement screen appears. If you want to agree, press the ◄► buttons to select Agree, then press the ENTER button.
NOTE
Screens can take a few seconds to appear.
The Service Update screen appears and installs a number of services and applications. When done, it closes. The applications and services downloaded are displayed on the Smart Hub screen. This may take some time.
NOTE
Smart Hub may close momentarily during the 
installation process.
A number of screens may appear after 
installation. You can press the ENTER button 
to close them or let them close on their own.
To start an application, press the ▲▼◄► 
buttons to highlight a application, then press 
the ENTER button. 
3.
✎

4.
✎

5.
✎


6.
 
						

							
 English
English 

05
Network Services

Smart Hub at a Glance 
xxxxxxxxContents 1xxxxxxxxContents 6xxxxxxxxContents 5xxxxxxxxContents 4xxxxxxxxContents 3xxxxxxxxContents 2
xxxxxxxxContents 7xxxxxxxxContents 8xxxxxxxxContents 9xxxxxxxxContents 10xxxxxxxxContents 11xxxxxxxxContents 12xxxxxxxxContents 13
xxxxxxxxContents 1xxxxxxxxContents 2xxxxxxxxContents 3xxxxxxxxContents 4xxxxxxxxContents 5xxxxxxxxContents 6
Contents 1Contents 2Contents 3Contents 4
1235
76
Search
4
Your Video
Recommended
Samsung Apps
a Login    b Sort by    c Edit Mode    d Settings
1Commercial : Displays the Smart Hub Guide, an introduction to the product, and new application introductions.
2
Your Video : Provides recommendations for videos based on your tastes.
Lets you see movie recommendations based on your previous preferences.
Lets you select a movie, displays a list of VOD (Video on Demand) providers that have the movie, and then lets you choose a provider for streaming. (Streaming is unavailable in some areas.)
For instructions to use Your Video, please visit www.samsung.com.
This feature is limited to certain regions.
•
•
•
•
3
Search : Provides an integrated search of your video providers and connected AllShare devices.
Usable while using Smart Hub (except when you are watching a Blu-ray Disc). 
For easy access, use the SEARCH button on the remote control.
For instructions to use search function, please visit www.samsung.com.
•
•
•
4Samsung Apps : You can download various for pay or free-of-charge application services.
5Recommended : Displays recommended contents managed by Samsung. 
6
Navigation Help : Displays the remote control buttons you can use to navigate in Smart Hub.RED (A) : To log in to Smart Hub.
GREEN (B) : To sort the applications.
YELLOW (C) : To edit the applications.
BLUE (D) : To change the settings of Smart Hub.
•
•
•
•
7My Applications : Displays your personal gallery of applications which you can add to, modify, and delete.
NOTE
Samsung Electronics takes no legal 
responsibility for any interruption of the Smart 
Hub service caused by the service provider for 
any reason.
The Smart Hub service downloads and 
processes data via the Internet so that you can 
enjoy the Internet contents on your TV screen.
If the Internet connection is unstable, the 
service may be delayed or interrupted.
Furthermore, the product may turn off 
automatically in response to conditions on the 
Internet.
If this occurs, check the Internet connection 
and try again.
Application services may be provided in 
English only and the contents available may 
vary, depending on your area.
For more information about a Smart Hub 
service, visit the web site of the applicable 
service provider.
The services provided are subject to change 
by the Smart Hub service provider without 
notice.
The Smart Hub service contents may differ 
depending on the product’s fi rmware version.
For pay DivX contents with copy protection 
can only be played through a composite or an 
HDMI cable. 
✎







 
						

							
 English

Network Services

English 

Using the Keypad
Through your remote, you can use the On-
Screen Keypad to enter letters, numbers, and 
symbols.
. , –abcdef123
ghijklmno456
pqrstuvwxyz789
ShiftDelete0
b Input Method / Language: English
T9ab      Ab      AB       1       
1
45
26
3
1The current keypad.Use to enter letters, numbers, and symbols.
2Press the FULL SCREEN button on the remote control to shift the input mode.: ab, Ab, AB, numbers or icons.
3Displays the current input mode.
4Press the GREEN (B) button on the remote control to change the input method. (T9 or ABC)
5Press the TOOLS button on the remote control to change the language.
6Press the REPEAT button on the remote control to delete a character.
Entering Text, Numbers and Symbols
To enter text, press the number button on the 
remote that corresponds to the letter you want to 
enter. Press the button rapidly to enter a letter that 
is not the fi rst letter listed on the On-Screen keypad 
button. For example, if you want to enter the letter 
b, press the 2 button on your remote rapidly twice. 
To enter the fi rst letter listed on a button, press, 
release, and then wait.
To move within the text, use the Arrow buttons. To 
delete text, move the cursor to the right of the 
character you want to delete, and then press the 
REPEAT button. To change case or enter numbers 
or punctuation, press the FULL SCREEN button.
Creating an Account
To establish your own, exclusive, confi guration of 
Smart Hub, create your own Smart TV Account.
To create an account, follow these steps:
Press the RED (A) button on your remote 
control. The Login screen appears.
xxxxxxxxContents 1xxxxxxxxContents 6xxxxxxxxContents 5xxxxxxxxContents 4xxxxxxxxContents 3xxxxxxxxContents 2
xxxxxxxxContents 7xxxxxxxxContents 8xxxxxxxxContents 9xxxxxxxxContents 10xxxxxxxxContents 11xxxxxxxxContents 12
xxxxxxxxContents 1xxxxxxxxContents 2xxxxxxxxContents 3xxxxxxxxContents 4xxxxxxxxContents 5
Contents 1Contents 2Contents 3Contents 4
a Login    b Sort by    c Edit Mode    d Settings
SearchYour Video
Recommended
Samsung Apps
xxxxxxxxContents 1
xxxxxxxxContents 7Contents 12
Contents 4
a Login    b Sort by    c Edit Mode    d Settings
SearchYour VideoSamsung Apps
xxxxxxxxContents 1xxxxxxxxContents 6
xxxxxxxxContents 7xxxxxxxxContents 8xxxxxxxxContents 9xxxxxxxxContents 10xxxxxxxxContents 11xxxxxxxxContents 12
Contents 1Contents 2Contents 3Contents 4Login
LoginCancelCreate AccountForgot Password
Remember my Smart TV ID and password
%Smart TV IDPasswordPress [ENTER]Press [ENTER]
Press the ▲▼◄► buttons to select Create 
Account, and then press the ENTER 
button.
On the next screen, select Smart TV ID, and 
then press the ENTER button. An entry 
screen and keypad appear.
Use the keypad to enter your e-mail 
address. This will serve as your ID. 
NOTE
The keypad works like the keypad on a cell 
phone.
When done, press the ENTER button to 
select OK, and then press the ENTER 
button again. The Create Account screen re-
appears.
Select Password, and then press the 
ENTER button. The Password screen and a 
keypad appear.
Use the keypad to enter a password. 
The password can be any combination of 
letters, numbers, and symbols.
NOTE
Press the RED (A) button on your remote to 
show or hide the password as you enter it.
1.
2.
3.
4.
✎

5.
6.
7.
✎

 
						

							
 English
English 

05
Network Services

When done, press the ENTER button to 
select OK, and then press the ENTER 
button again. The Login screen re-appears.
Select Confirm password, and then press 
the ENTER button.
Repeat Steps 7 and 8. 
When the Login screen re-appears, select 
Create Account, and then press the 
ENTER button. The Confirmation window 
appears.
Select OK, and then press the ENTER 
button. The Continue to Register Service 
window appears.
Select Go Register, and then press the 
ENTER button.
The Register Service Account Window 
appears. 
If you have existing accounts with any of the listed providers, you can associate the provider account and the provider account password with your Smart TV Account. Registration makes it easier to access the providers web site. For registration instructions, go to Step 2 in Account Management under the Settings Menu.
If you don’t have existing provider accounts or do not want to register existing accounts at this time, select Register Later, and then press the ENTER button. You can also let the window close on its own in about a minute.
NOTE
You must use an e-mail address as an ID.
You can register up to 10 User Accounts.
You do not need an account to use Smart 
Hub.
Account Log In
To log in to your Smart TV Account, follow these 
steps:
With the Smart Hub main screen displayed 
on your TV, press the RED (A) button on 
your remote. The Login screen appears.
8.
9.
10.
11.
12.
13.
14.
•
•
✎



1.
Select the Down Arrow next to the Smart 
TV ID field, and then press the ENTER 
button. 
Select your ID from the list that appears, and 
then press the ENTER button. The Login 
screen re-appears.
Select Password, and then press the 
ENTER button. The Password window and 
a keypad appears.
Using the keypad and your remote, enter 
your password. When done, press the 
ENTER button, select OK, and then press 
the ENTER button again.
NOTE
If you want Smart Hub to enter your password 
automatically, select Remember my Smart TV 
ID and password after you have entered your 
password, and then press the ENTER button. 
A check appears. Smart Hub will now enter 
your password automatically when you select 
or enter your ID.
The Settings Menu - BLUE (D)
The Settings Menu Screen gives you access to 
account management, account reset, and 
account properties functions. 
To access the Settings Menu, and then select a 
menu item, follow these steps:
Press the BLUE (D) button on your remote.
Press the ▲▼ to select a menu item, and 
then press the ENTER button.
The functions on the Settings Menu screen are 
described below.
NOTE
The Service Manager item listed in the Settings 
Menu is not available for Blu-ray Home 
Cinemas.
Account Management
The Account Management Menu contains 
functions that let you register your service 
provider accounts, change your Smart Hub 
password, and delete or deactivate your Smart 
TV Account.
2.
3.
4.
5.
✎

1.
2.
✎

 
						

							
 English

Network Services

English 

Register Service Account
If you have existing accounts with any of the 
providers listed by the Register Service Account 
function, you can associate the provider account 
and the provider account password with your 
Smart TV Account. If you associate the account, 
you will be able to log onto the account through 
Smart Hub easily, without entering your account 
name or password.
To use the Register Service Account function, 
follow these steps:
In the Settings menu, select Register Service 
Account, and then press the ENTER button. 
The Register Service Account Window 
appears.
Press the ▲▼ arrow buttons to select a 
Service Provider you want to associate with 
your Smart TV Account, and then press the 
ENTER button.
NOTE
If you have a Samsung account and you want 
to use the Samsung Apps function in Smart 
Hub, you must register your Samsung Apps 
account here. See page 69 for more 
information.
Using your remote and the on-screen 
Keypad, enter your site ID and password. 
When done, press the ENTER button. 
NOTE
This is the ID and password you normally use 
to access your account on this site.
If you have entered the ID and password 
correctly, the Registered Successfully 
message appears.
If you pressed ENTER, repeat Steps 2 
through 4 to associate another Service 
Provider. 
When you are done, press the RETURN 
button.
1.
2.
✎

3.
✎

4.
5.
6.
Change Password 
The Change Password function lets you change 
your Smart Hub password. To change the 
password, follow these steps:
Select Change Password, and then press 
the ENTER button.
Enter your current password. The next 
screen appears.
On the next screen, enter a new password 
on the first line. Enter it again on the second 
line to confirm.
The Changing Password Complete message 
screen appears. Press the ENTER button or 
wait for the screen to close - about 5 
seconds.
Remove from TV Account List
The Remove from TV Account List function 
cancels all your current registered Service 
Accounts that you registered on the Register 
Service Account screen.
Deactivate Account
The Deactivate Account function deactivates your 
Smart TV Account and deletes it and all your 
account settings entirely from Smart Hub. 
Service Manager
This menu is for setting the service of the special 
application. (Application-related is like AP New, 
Ticker etc.)
NOTE
This function operates only when special 
application is installed.
Reset
The Reset function initializes all downloaded 
application, erases all user accounts and settings 
from the product, and resets all Smart Hub 
settings to the factory default settings. It then 
restarts Smart Hub as if it were starting for the 
first time. Your account, however, remains on the 
Smart Hub server. To log into your account, enter 
your ID and password on the Create Account 
screen.
1.
2.
3.
4.
✎

 
						

							
 English
English 

05
Network Services

To use the Reset function, follow these steps:
In the Account Management menu, select 
Reset, and then press the ENTER button.  
The Reset screen appears.
Enter the your Security password. This is the 
password you entered if you set up a BD or 
DVD Parental rating (See page 44). If you did 
not, enter 0000.
After a few moments, Smart Hub 
automatically resets. The screen may go 
black, then Smart Hub re-appears. In a few 
moments, it starts the re-initialization 
procedure.
To complete the re-initialization, go to Step 4 
in Starting Smart Hub for the First Time. (See 
page 62) 
NOTE
If you forgot your password, press the STOP  
( @ ) button on the front panel of the product 
for more than 5 seconds with no disc inserted. 
Properties
The Properties menu item lists three functions 
that display information about Smart Hub :
Detail
Lists information about Smart Hub including 
version number, the number of services installed, 
memory usage, and the unique product ID.
Terms of Service Agreement
Displays the Terms of Service Agreement.
1.
2.
3.
4.
✎

The Edit Mode Menu - YELLOW (C)
The functions in the Edit Mode menu let you 
manipulate the application in the My Applications 
section of the Smart Hub screen. Using these 
functions, you can lock and unlock access to 
some application, New Folder and move 
application to them, rename folders, delete 
application, and change the position of 
application on the screen.
To access the Edit Mode Menu, and then select 
a menu item, follow these steps:
Press the YELLOW (C) button on your 
remote. The Edit Mode menu bar appears 
on the bottom of the screen.
Press the ▲▼◄► to select a menu item, 
and then press the ENTER button.
The functions in the Edit Mode Menu bar are 
described below.
NOTE
Some menu items may not appear on the 
screen. To see these items, press the ◄► to 
move to the screen edge, and then press one 
more time to reveal the items.
You can close the bar by highlighting the X on 
the bottom right side, and then pressing the 
ENTER button.
Move
The Move function lets you change the screen 
position of a application. To use the Move 
function, follow these steps:
Press the YELLOW (C) button on your 
remote. 
Select a application, and then press the 
ENTER button. A check appears above the 
application.
Press the ▲▼◄► to select Move, and 
then press the ENTER button. A position 
change icon appears above the application.
Press the ▲▼◄► to move the icon. Press 
the ENTER button when the icon is in the 
position of your choice. The application 
moves to its new location.
1.
2.
✎


1.
2.
3.
4.
 
						

							
 English

Network Services

English 

New Folder
The New Folder function lets you create and 
name new folders. Once you have created a 
folder, you can move application into it. To use 
the New Folder function, follow these steps:
Press the YELLOW (C) button on your 
remote. 
Press the ▲▼◄► to move the cursor to 
New Folder, and then press the ENTER 
button. The New Folder window and a 
keypad appear.
Use the keypad to enter the name of the 
folder, and then press the ENTER button.  
The New Folder screen closes and the New 
Folder appears on the Smart Hub screen.
Move to Folder
The Move to Folder function lets you move a 
application to a folder. To use the Move to Folder 
function, follow these steps:
Press the YELLOW (C) button on your 
remote. 
Select a application, and then press the 
ENTER button.
Press the ▲▼◄► to select Move to Folder, 
and then press the ENTER button. The 
Move to Folder window opens.
Press the ▲▼◄► to select a folder, and 
then press the ENTER button. The Moved to 
Folder message appears, and then closes. 
The application has been moved to the 
folder.
To Access Application in a Folder
Close the Edit Mode menu.
In My Applications, press the ▲▼◄► to 
select a folder, and then press the ENTER 
button. The folder opens.
Select a application, and then press the 
ENTER button. The application’s application 
or service starts.
1.
2.
3.
1.
2.
3.
4.
1.
2.
3.
To Edit Items in a Folder
Select a folder, and then press the ENTER 
button. The folder opens.
Press the YELLOW (C) button on your remote. 
The Edit buttons appear at the bottom of the 
screen.
These buttons work the same as the Edit Mode 
menu buttons on the main screen. For example, 
to move a application back to the My 
Applications main screen:
Select the application.
Select Move to Folder, and then press the 
ENTER button. The Move to Folder window 
appears.
Select My Apps, and then press the ENTER 
button. The Move to Folder window closes 
and the application returns to the main My 
Applications screen.
Rename Folder
The Rename Folder function lets you rename 
folders. To use the Rename Folder function, 
follow these steps:
Press the YELLOW (C) button on your 
remote. 
Press the ▲▼◄► to select a folder, and 
then press the ENTER button. 
Press the ▲▼◄► to select Rename a 
Folder, and then press the ENTER button. 
The Folder Rename window and a keyboard 
appears.
Use the key board to enter a new name, and 
then press the ENTER button. The Rename 
window closes and the new name appears 
below the folder.
1.
2.
3.
1.
2.
3.
4.
 
						

							
 English
English 

05
Network Services

Lock
The Lock function lets you lock some application 
in My Applications so they can not be opened 
without entering the Parental Security Code.
To use the Lock function, follow these steps:
Press the YELLOW (C) button on your 
remote. 
Press the ▲▼◄► to select a application, 
and then press the ENTER button. If the 
application can be locked, the Lock menu 
item is enabled.
Press the ▲▼◄► to select Lock, and then 
press the ENTER button. The Security 
window appears.
Enter your Parental Security Code (See page 
44). If you have not created a Parental 
Security Code, enter 0000.
Press the ENTER button. The Lock Service 
window appears confirming the lock, and 
then closes. A lock symbol appears next to 
the application.
Unlock
Press the YELLOW (C) button on your 
remote. 
Press the ▲▼◄► to select a locked 
application, and then press the ENTER 
button.
Press the ▲▼◄► to select Unlock, and 
then press the ENTER button. The Security 
window appears.
Enter the Parental Security Code (See page 
44). If you have not created a Parental 
Security Code, enter 0000.
Press the ENTER button. The Lock Service 
Released window appears confirming the 
lock has been release, and then closes.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
Delete
The Delete function lets you delete application 
from My Applications. To use the Delete function, 
follow these steps:
Press the YELLOW (C) button on your 
remote. 
Press the ▲▼◄► to select a application, 
and then press the ENTER button.
Press the ▲▼◄► to select Delete, and 
then press the ENTER button. The 
message, "Do you want to delete the 
selected item(s)?" appears.
Select Yes, and then press the ENTER 
button. The application is deleted.
The Sort by Menu - GREEN (B)
The functions in the Sort Menu let you sort the 
application in My Applications by Default, Name, 
Date, Frequency, Category, User Defined. If you 
manually change the position of a application, the 
Sort Menu automatically highlights User Defined 
when you start it.
To sort the application in My Applications, follow 
these steps:
Press the GREEN (B) button on your 
remote.
Press the ◄► to select a sorting method, 
and then press the ENTER button. Smart 
Hub sorts the application by the method you 
have chosen.
Samsung apps
Samsung Apps lets you download for pay or 
free-of-charge applications and services to your 
Blu-ray Home Cinema and view or use them on 
your TV.
These applications and services include videos, 
music, photos, games, news, sports, etc. 
Application for the new apps appear in My 
Applications.
Additional applications and services are added 
regularly.
1.
2.
3.
4.
1.
2.
 
						

							
0 English

Network Services

English 1

For Pay Apps
To download for pay apps, you need to create a 
Samsung Account and add a credit card to the 
account.
To create a Samsung account, please visit www.
samsung.com
NOTE
This service may not provided in some 
countries.
Accessing the Samsung Apps Screen
To access Samsung Apps, press the ▲▼◄► 
buttons to navigate to the Samsung Apps area 
on the Smart Hub main screen, and then press 
the ENTER button. The Samsung Apps screen 
appears. 
NOTE
If this is the first time you are accessing this 
screen, the terms of service window appears. 
Select Agree, and then press the ENTER 
button.
Using the Samsung Apps Screen
To use the Samsung Apps screen, follow these 
steps:
Press the ◄► buttons to move to the 
category list on the left.
Press the ▲▼ to highlight a category. In a 
few seconds, the Samsung Apps screen 
displays the applications in that category. 
The Sort tabs appear across the top.
Press the ► button to move to the displayed 
applications or services.
Press the ▲▼◄► buttons to select an 
application or service, and then press the 
ENTER button. The Application Details 
screen appears describing the service or 
application.
Select Download Now, and then press the 
ENTER button. If the application or service is 
free, it downloads and runs. If not, and there 
is a fee, follow the directions on the screen 
to complete the download.
✎

✎

1.
2.
3.
4.
5.
NOTE
Some apps are free to download, but require 
registration with the provider or a paid account 
with the provider to use.
Application for applications and services you 
have downloaded from Samsung Apps appear 
in My Applications.
Sort By Tabs
You can access the Sort By tabs on the top of 
the screen using the ▲▼◄► buttons. Each tab 
displays the services or applications in the 
category you chose, sorted by the criteria on the 
tab (Recommended, Most Downloaded, Most 
Recent, Name).
You can also use the BLUE (D) button on your 
remote to access the Sort By tabs. Each time 
you press the BLUE (D) button, you change the 
display from one sort tab to the next.
Samsung Apps by category
The following categories are available:
What’s New? : Displays newly registered applications.
Video : Displays various video media such as movies, TV shows, and short length videos.
Game : Displays various games such as sudoku and chess.
Sports : Displays various sports media services such as match information, images, and short length videos.
Lifestyle : Includes various lifestyle media services such as music, personal photo management tools, and social networking such as Facebook and Twitter.
Information : Includes various information services such as news, stocks, and weather.
Other : Includes other miscellaneous services.
✎


•
•
•
•
•
•
•