Samsung Ht D355k User Manual

							0 EnglishEnglish 1
03 Setup
Settings
Move   Select              Return
Speaker Setting
Speaker Size  ▶Sound Edit
Delay Time
T
est Tone  :   Off
 Select   Return
For the Front, the mode is set to Small.
For the Subwoofer, the mode is set to Present.
For the Center and Surround, you can switch the 
mode to Small or None.
- Small  :    Select this when using the speakers.
- None  : 
  Select this when no speaker is 
connected.
NOTE
The speaker mode may vary depending on the 
Dolby Pro Logic and Stereo settings.
Sound Edit
You can adjust the balance and level for each speaker.
Settings
mMove    " Select    ' Return
Sound Edit 

						

							 English
Setup
English 
DRC (Dynamic Range Compression)
This feature balances the range between the loudest 
and quietest sounds. You can use this function to 
enjoy Dolby Digital sound when watching movies at 
low volume at night.You can select either Full, 6/8, 4/8, 2/8, off.
AUDIO SYNC
Video and audio sync may not match with digital TV. 
If this occurs, adjust the audio delay time to
match the videoYou can set the audio delay time between 0ms 
and 300ms. Set it to the optimal status.
HDMI AUDIO
The audio signals transmitted over the HDMI Cable 
can be toggled On/Off.
O ff :  
Video is transmitted over the HDMI 
connection cable only, and audio is output 
through the product speakers only.
O

n :   
Both video and audio signals are transmitted 
over the HDMI connection cable, and audio 
is output through your TV speakers only.
NOTE
The default setting of this function is HDMI Audio Off.
HDMI Audio is automatically down-mixed to 2ch for 
TV speakers.
When HDMI Audio is set to On, PL II /DSP EQ 
/P.BASS doesn't work.
With HDMI AUDIO set to 'On', the volume can be 
adjusted only using the TV remote control.
KARAOKE SCORING
Karaoke score display can be toggled On or Off.
Off :  Turns off the karaoke score display.
On :    A
fter the singing, the score is displayed on the 
screen.
NOTE
This function is available only for the CD-DA/DVD.
Karaoke score may be affected by ambient noise.
~
~
~
~
✎
`
`
`
`
~
~
✎
`
`
System
Initial Settings
By using the Initial Setting, you can set the language and 
TV aspect. 
NOTE
If the HDMI cable is connected to the product, 
TV aspect does not appear and it is set to 16:9 
Wide automatically.
DivX(R) Registration
View DivX(R) VOD Registration Code to purchase
and play DivX(R) VOD content.
Language
You can select the language you prefer for on-
screen menu, disc menu, etc. 
OSD 
LanguageSelect the language for the on-
screen displays.
Disc MenuSelect the language for the disc 
menu displays.
AudioSelect the language for disc audio.
SubtitleSelect the language for disc subtitles.
a    To select a language that does not appear in the 
menu, select OTHERS in the Disc Menu, Audio and 
Subtitle, and enter the language code of your 
country (see page 32).
a    Y
ou cannot select OTHERS in the OSD Language 
menu.
NOTE
The selected language will only appear if it is 
supported on the disc.
✎
`
✎
`
 
						

							 EnglishEnglish 
04 Basic Functions
Security
The Parental Lock function works in conjunction with 
DVDs that have been assigned a rating, which helps you 
control the types of DVDs that your family watches. 
There are up to 8 rating levels on a disc.
Parental Rating
Select the rating level you want to set. 
A larger number indicates that the program is intended 
for adult use only. For example, if you select up to Level 
6, discs that contain Level 7, 8 will not play.
Enter the password and then press the ENTER button.
- The password is set to "0000" by default.
-
    Once the setup is complete, you will be taken to the 
previous screen.
Change Password
Select  Change  and enter the 4-digit password to set 
the parental lock using the number buttons on the 
remote control.
If you forgot your password
Remove the disc.
Press and hold the  STOP (@ ) button on the 
remote control for 5 seconds or more. All 
settings will revert to the factory settings.
Support
Product Information
Provide the product information such as Model 
code, Softrware Version, etc.
1.
2.
Disc Playback
  Press the  OPEN/CLOSE  (^ ) button.
Place a disc gently into the tray with the disc's 
label facing up.
Press the  OPEN/CLOSE  (^ ) button to close 
the disc tray.
NOTE
Resume function: When you stop disc play, the 
product remembers where you stopped, so when 
you press  PLAY button again, it will pick up 
where you left off. (This function works only with 
DVDs.) 
Press the  STOP button twice during playback to 
disable the Resume function.
If no buttons are pressed on the product or 
remote control for more than 3 minutes when the 
product is in Pause mode, it will change to STOP 
mode.
The initial screen may appear different, depending 
on the content of the disc.
Pirated discs will not play in this product because 
they violate the CSS (Content Scrambling 
System: a copy protection system) 
recommendations.
a    will appear when an invalid button is pressed.
TV Screen Saver/Power Saving Function
If no button input is made for more than 5 minutes 
in Stop or Play mode, the screen saver will get 
activated.
If the product is left in the screen saver mode for 
more than 20 minutes, the power will 
automatically turn off. (Except when playing 
music.)
1.
2.
3.
✎
`
`
`
`
~
~
Basic Functions
 
						

							 English
Basic Functions
English 
 
 
 
 Audio CD(CD-DA)/mP3/WmA Playback
BA
Track01
1/17
0:15  /  3:59
Function   DVD/CD                            Repeat   Play Mode
Insert an Audio CD(CD-DA) or an MP3 Disc into the 
disc tray.
For an Audio CD, the first track will be played 
automatically. 
-
    Press the  [] buttons to move to the 
previous/next track.
For the MP3/WMA disc, press the  _+ 
buttons to select  Music, then press the 
ENTER  button.
- 

 
Press the  $%_+ buttons to select  a 
desired file and press the ENTER button. 
- 

 
Press the ()  buttons to move to the 
previous/next pages.
Press the  STOP (@ ) button to stop playback.
NOTE
Some MP3/WMA-CDs may not play, 
depending on the recording mode.
Table of contents of a MP3-CD varies 
depending on the MP3/WMA track format 
recorded on the disc.
The WMA-DRM files and DTS CD cannot be 
played. 
When MP3/WMA/CD playing, number key 
doesn't work.
1.
~
~
2.
✎
`
`
`
`
JPEG file Playback
Images captured with a digital camera or camcorder, or 
JPEG files on a PC can be stored on a CD and then 
played back with this product.
Insert a JPEG disc on the disc tray.
Press the 
_+ buttons to select  Photo, and 
then press the  ENTER button.
Press the $% buttons to select the folder you 
want to play, and then press the  ENTER button.
Press the ▲▼ buttons to select the photo you 
want to play, and then press the ENTER button.
The selected file will play and slide show will 
start.
To stop slide show, press the  PAUSE (# ) 
button.
You can view the previous/next file by 
pressing the ◀,▶ buttons during the 
slideshow mode.
2011/01/01
JPEG 1
JPEG 2
JPEG 3
Function   DVD/CD                            Pages     Return
642 X 352
ROOT
Rotate Function   
G
Press the GREEN(B)  or YELLOW(C) button during the 
PAUSE mode.
GREEN(B)  Button: Rotate 90° counterclockwise.
YELLOW(C)  Button: 
Rotate 90° clockwise.
NOTE
The maximum resolutions supported by this 
product are 5120 x 3480 (or 19.0 MPixel) for 
standard JPEG files and 2048 x 1536 (or 3.0 
MPixel) for progressive image files. 
1.
2.
3.
4.
~
~
~
~
~
✎
`
 
						

							 EnglishEnglish 
04 Basic Functions
Using the Playback function
Forward/Reverse Search
 BAD
Press the () buttons for Search Function.
 
     (  1  ➞  (  2  ➞  (  3  ➞  (  4
     )
 1  ➞  )  2  ➞  )  3  ➞  )  4
NOTE
No sound is played in search mode.
The playback search produces sound only when 
searching at 
)1 and )2 speed.
This function is available only for the CD-DA.
Skipping Scenes/Songs
 BAD
Press the  [] buttons.
Each time the button is pressed during playback, 
the previous or next chapter, track or directory 
(file) will be played.
You cannot skip chapters consecutively.
Slow Motion Play        
 D
Press the PAUSE (# ) button and then  ) button  for 
Slow Motion play.
 * 1 ➞ * 2 ➞ * 3
D*1 ➞ * 2 ➞ * 3
NOTE
No sound is heard during slow playback.
Reverse slow playback does not work.
✎
`
`
`
~
~
✎
`
`
Step Motion Play   
 D
Press the  PAUSE button repeatedly.
The picture moves forward one frame each time 
the button is pressed during playback.
NOTE
No sound is heard during step motion playback.
5 Minute Skip function
D
During playback, press the _ ,+ button.
Playback skips 5 minutes forward whenever you 
press the 
+ button.
Playback skips 5 minutes backward whenever 
you press the 
_ button.
NOTE
This function is available only for the DivX that 
contains time information.
Using the Disc Menu  
You can view the menus for the audio language, 
subtitle language, profile, etc. 
During playback, press and hold the 
DISC MENU  button on the remote 
control.
Press the  $%_+ buttons to make the desired 
selection, then press the  ENTER button.
NOTE
Depending on the disc, menu setup items may 
vary and this menu may not be available.
~
✎
`
~
~
✎
`
1.
2.
✎
`
 
						

							 English
Basic Functions
English 
Using the Title Menu  
For DVDs containing multiple titles, you can view the 
title of each movie.  During playback, press the  TITLE 
button on the remote control.
Press the  $%_+ buttons to make 
the desired selection, then press the 
ENTER  button.
NOTE
Depending on the disc, menu setup items may 
vary and this menu may not be available.
Repeat Playback
 BAD
DVD/DivX Repeat
You can repeat the title, chapter or the section(A-B 
Repeat) of the DVD/DivX.
Repeat    OFF   
During DVD/DivX playback, press 
the REPEAT  button on the remote 
control.
Press the  $% buttons to select a 
desired repeat mode, then press 
the  ENTER  button.
Press the ▲▼ buttons to select  OFF to return 
to normal play, then press the  ENTER button.
ZTitle ➞ Chapter  ➞ A -  ➞ Off
DTitle ➞ Folder ➞ All ➞ Off
1.
2.
✎
`
1.
2.
3.1 2 3
4 5 6
7 8
0 9
DISC MENU
TITLE FUNCTION
TV SOURCE
DSP / EQ
A B C DMO / ST
REPEAT CD RIPPING DIMMER
TUNER 
MEMORYP.SCAN
I N F O
VOL
TV CH V
TUNING VDVD RECEIVER SELECT
SAMSUNG TV
MUTE
POWER
P L
TOOLS
CD/MP3 Repeat
During the CD/ MP3 playback, press the 
REPEAT button repeatedly to select the repeat 
mode you want.
B
  ;  ;  ; ; 
(Repeat Off 
; Repeat Disc  ; Repeat All  ; 
Random  ; Repeat Section A-B)
A
;  ;  ; ; 
(Repeat Off  ; Repeat Disc ; 
Repeat Dir (Directory)  ; Repeat All  ; Random)
A-B Repeat Playback
 B
You can repeatedly play back a designated section 
of a DVD or CD.
During the DVD disc or CD playback, press the 
REPEAT  button on the remote control.
For DVD, press the  $% buttons to select  A-.
For CD press the  REPEAT button repeatedly 
until 
appears.
Press the  ENTER button at the point where you 
want repeat play to start (A).
Press the  ENTER button at the point where you 
want repeat play to stop (B).
To return to normal playback,For DVD, press the  $% buttons to select to OFF. 
For CD, press the  REPEAT button to select to .
NOTE
The A-B Repeat function does not operate with 
DivX, MP3 or JPEG discs.
1.
1.
2.
3.
4.
5.
✎
`
 
						

							 EnglishEnglish 
04 Basic Functions
Displaying Disc Information
Change   Select
03/04
001/001
0:00:21
KO 1/2
EN 02/02
1/1
D
Change   Select
1/6
1/1
Off/1
During playback, press the TOOLS 
button on the remote control.
Press the  $% buttons to select the 
desired item.
Press the  _+ buttons to make the 
desired setup change and then press the 
ENTER  button.
-  You may use the number buttons of the  remote control to control some items.
To make Disc information disappear, press the 
TOOLS  button again.
NOTEIf you are playing contents from the tools menu, some 
functions may not be enabled depending on the disc.
You can also select Dolby Digital or Pro Logic, 
depending on the disc.
Some tools menus may differ depending on discs and 
fi les.
1.
2.
3.
4.
✎`
`
`
TOOLS menu
Title(  ) : To access the desired title 
when there is more than one in the disc. 
For example, if there is more than one 
movie on a DVD, each movie will be 
identifi ed as a Title.
Chapter( 
 ) : Most DVD discs are 
recorded in chapters so that you can 
quickly fi nd a specifi c chapter.
Playing time( 
 ) : Allows playback of 
the fi lm from a desired time. You must 
enter the starting time as a reference. 
The time search function does not 
operate on some discs.
Audio( 
 ): Refers to the fi lm's 
soundtrack language. A DVD Disc can 
contain up to 8 audio languages.
Subtitle( 
 ): Refers to the subtitle 
languages available in the disc. You will 
be able to choose the subtitle languages 
or, if you prefer, turn them off from the 
screen. A DVD Disc can contain up to 
32 subtitle languages.
Angle( 
 ): When a DVD contains 
multiple angles of a particular scene, you 
can use the Angle function.
Selecting the Audio Language
 D
Press the  TOOLS button.
Press the  $% buttons to select  AUDIO ( 
 ) 
display.
Press the  _+ buttons to select the desired 
audio language.
Depending on the of languages on a DVD 
disc, a different audio language is selected 
each time the button is pressed.
NOTE DTS audio is not supported.
`
`
`
`
`
`
1.
2.
3. ~
✎`
1 2 3
4 5 6
7 8 0 9
DISC MENU
TITLE FUNCTION
TV SOURCE
DSP / EQ
A B C DMO / ST
REPEAT CD RIPPING DIMMER
TUNER 
MEMORYP.SCAN
I N F O
VOL
TV CH V
TUNING VDVD RECEIVER SELECT
SAMSUNG TV
MUTE
POWER
P L
TOOLS
 
						

							 English
Basic Functions
English 
Selecting the Subtitle Language
 D
Press the TOOLS button.
Press the  $% buttons to select  SUBTITLE (
   ) 
display.
Press the  _+ buttons to select the desired 
subtitle language.
Depending on the of languages on a DVD 
disc, a different audio language is selected 
each time the button is pressed.
NOTE
Depending on the disc, the Subtitle and Audio 
Language functions may not be available.
Caption Function
D
You must have some experience with video 
extraction and editing in order to use this feature 
properly. 
To use the caption function, save the caption file 
(*.smi) in the same file name as that of the DivX 
media file (*.avi) within the same folder.  
E

xample.   Root    Samsung_007CD1.avi 
Samsung_007CD1.smi
Up to 100 alphanumeric characters or 50 East 
Asian characters (2 byte characters such as 
Korean and Chinese) for the file name.
The subtitle of DivX files are *.smi, *.sub, *.srt over 
148 kbyte is not supported.
Angle Function                     
This function allows you to view the same scene in 
different angles.
Press the  TOOLS button.
Press the  $% buttons to select  ANGLE (
) 
display.
Press the  _+ buttons to select the desired 
angle.
1.
2.
3.
~
✎
`
~
~
~
~
1.
2.
3.
NOTE
The Angle function works only with discs on 
which multiple angles have been recorded.
DIMMER
You can adjust the brightness of the display on the 
main unit.
Press the  DIMMER  button.
Sound mode
DSP (Digital Signal Processor)/EQ
DSP (Digital Signal Processor) : DSP modes have 
been designed to simulate different acoustic 
environments. 
EQ : You can select POP,  JAZZ, or ROCK etc. to 
optimize the sound for the genre of music you are 
playing
.
Press the  DSP/EQ button.
POPS, JAZZ, ROCK  ➞ STUDIO  ➞ CLUB 
➞  HALL  ➞ MOVIE  ➞ CHURCH  ➞ OFF
NOTE
The DSP/EQ function is only available in Stereo 
mode.
The DSP/EQ function is not available while playing 
AC3 signal in 2.1 channel mode.
✎
`
~
~
✎
`
`
1 2 3
4 5 6
7 8
0 9
DISC MENU
TITLE FUNCTION
TV SOURCE
DSP / EQ
A B C DMO / ST
REPEAT CD RIPPING DIMMER
TUNER 
MEMORYP.SCAN
I N F O
VOL
TV CH V
TUNING VDVD RECEIVER SELECT
SAMSUNG TV
MUTE
POWER
P L
TOOLS
 
						

							 EnglishEnglish 
04 Basic Functions
S/W LEVEL 
You can also press the S/W LEVEL button on the 
remote control and use the  _ or + 
buttons to adjust the level of subwoofer.
Press the  S/W LEVEL  button.
Dolby Pro Logic II Mode
You can select the desired Dolby Pro Logic II audio 
mode, P.Bass or MP3 Enhancement function.
Press the 
PL II button.
MP3 ENHANCE  ON  ➞  POWER  BASS 
ON  ➞  P
OWER  BASS  OFF  ➞  MUSIC  ➞ 
M
OVIE  ➞  P
ROLOG  ➞  MATRIX  ➞  STEREO
NOTEWhen selecting Pro Logic II mode, connect 
your external device to the AUDIO INPUT jacks  
(L and R) on the product. If you connect to only 
one of the inputs (L or R), you cannot listen to 
surround sound.
The Pro Logic II function is only available in 
Stereo mode.
The Pro Logic II function is not available while 
playing AC3 signal in 2.1 channel mode.
Listening to Radio
Using buttons on the Remote Control
Press the  FUNCTION  button to select  FM.
Tune in to the desired station.
Preset Tuning 1 : You must first add a desired 
frequency as a preset. Press the STOP  (@ ) 
button to select PRESET and then press the 
TUNING (
) button to select the preset 
station.
Manual Tuning  : Press the STOP (@ ) button to 
select  MANUAL  and then press the  TUNING
✎`
`
`
1.
2.
~
~
() button to tune in to a lower or higher 
frequency.
Automatic Tuning : Press the  STOP (@ ) button 
to select  MANUAL  and then press and hold the 
TUNING (
) button to automatically search the 
band.
Setting Mono/Stereo
 Press the  MO/ST button. 
Each time the button is pressed, the 
sound switches between  STEREO and 
MONO .
In a poor reception area, select  MONO for a clear, 
interference-free broadcast.
Presetting Stations
Example : Presetting FM 89.10 in the memory 
Press the  FUNCTION  button to select  FM.
Press the TUNING (,,. ) buttons to 
select .
Press the TUNER MEMORY button. 
Number flashes on the display.
Press the , ,. buttons to select 
preset number.
You can select between 1 and 15 presets.
Press the TUNER MEMORY button again.
Press the  TUNER MEMORY  button before 
number disappears from the display.
Number disappears from the display and the 
station is stored in memory.
To preset another station, repeat steps 2 to 5. 
~
~
~
1.
2.
3. ~
4.
~
5. ~
~
6.
1 2 3
4 5 6
7 8 0 9
DISC MENU
TITLE FUNCTION
TV SOURCE
DSP / EQ
A B C DMO / ST
REPEAT CD RIPPING DIMMER
TUNER 
MEMORYP.SCAN
I N F O
VOL
TV CH V
TUNING VDVD RECEIVER SELECT
SAMSUNG TV
MUTE
POWER
P L
TOOLS
 
						

							0 English
Advanced Functions
English 1
USB function
Playing Media Files using the 
USB Host Feature
You can enjoy media fi les such as pictures, movies 
and music saved on an MP3 player, USB memory 
stick or digital camera in high quality video with 5.1 
channel sound by connecting the storage device to 
the USB port of the product.
5V 500mAMIC 1MIC 25V 500mAMIC 1MIC 2
Connect the USB device to the USB port on the 
front panel of the product.
Press the FUNCTION  button to select USB.
USB  appears on the display screen and then 
disappears.
Press the 
_+ buttons to select  Videos, Photo 
or  Music .
- Select a fi le to play.
Safe USB Removal
To prevent damage to the memory stored in the 
USB device, perform safe removal before 
disconnecting the USB cable.
Press the  YELLOW(C)  button.
-   REMOVE  will appear on the display.
Remove the USB cable.
NOTE
To listen to your music fi les with 5.1 channel 
sound, you must set the Dolby Pro Logic II 
mode to Matrix. (See page 29)
Remove the USB cable from the USB port 
slowly. Otherwise, it may cause damage to the 
USB port.
1.
2. ~
3.
~
~
✎
`
`
USB Recording
While playing CD-DA (Compact Disc Digital Audio) 
using the USB Recording function you can record the 
audio source in the USB memory.
Connect the USB device to your product.
Insert the CD-DA disc into the CD tray.
Press the  USB REC  button on the remote control.
To start ripping the current track, 
press the USB REC button on the 
remote control while the system is 
playing a track or stopped temporarily.
To record the entire CD, press and 
hold the USB REC button on the remote control.
-  "FULL CD RIPPING" appears on the display and  recording starts.
Press the  STOP (@ ) button to stop recording.
When USB recording of a CD is completed, you 
will fi nd a new folder named “RECORDING” in the 
USB drive. The contents will be saved in the folder 
in the MP3 format.
NOTE
Do not disconnect the USB connection or the power cable 
during the USB Recording. Otherwise, it may cause 
damage to the data. 
To stop USB Recording, press the STOP button and 
disconnect the USB device after the system stops playing 
the CD completely.
If you disconnect the USB connection during the USB 
Recording, the system will turn off and you will not be able 
to delete the recorded fi le.
If you connect the USB device to the system while it is 
playing a CD, the system stops temporarily and will play 
again. 
DTS-CDs cannot be recorded.
If the recording duration is less than 5 seconds, a recording 
fi le may not be created.
USB Recording works only if the USB device is formatted in 
the FAT fi le system. (The NTFS fi le system is not 
supported.)
The audio signal will not be output during USB recording of 
the CD.
When HDMI AUDIO is set to On, the USB Recording 
function is not supported.
1.
2.
3. ~
~
4. ~
✎
`
`
`
`
`
`
`
`