Samsung Ht C9950w User Manual

							
English 61
04 Basic Functions
1Displays the music information.
2Displays the playlist.
3Shows the current track/total tracks.
4Displays buttons available.
5Shows the current play time/total play time.
6Displays the current playback status.
7Displays the repeated playback status.
Repeat an Audio CD (CD-DA)/MP3
During the Playlist playback, press 
the REPEAT  button.
Select the desired play mode by 
pressing the  REPEAT button 
repeatedly.
Off Audio CD 
(CD-DA)/MP3 Tracks on a disc are played 
in the order in which they 
were recorded on the disc.
(
  ) Track Audio CD 
(CD-DA) Current track is repeated.
(
  )  One MP3 Current track is repeated.
(
  ) All Audio CD 
(CD-DA)/MP3 All tracks are repeated.
(
) Shuf  e Audio CD 
(CD-DA)/MP3The random option plays a 
discs track in random order.
Playlist           
Insert an Audio CD (CD-DA) or an MP3 Disc 
into the disc tray.
For an Audio CD (CD-DA), the fi rst track will 
be played automatically.
For an MP3 disc, press the ◄► buttons to 
select  Music , then press the  ENTER button.
1.
2.
1.
•
•
To move to the Music List, press the  STOP ( ) 
or  RETURN  button.
The Music List screen is displayed.
Press the ▲▼◄► buttons to move to the 
desired track, and then press the  YELLOW (C) 
button to check desired tracks.
Repeat this procedure to select additional tracks.
    Select  Jump page  r Return
3 fi les selected    1/2 Page
TRACK 00200:04:27TRACK 00400:03:41TRACK 00600:03:35TRACK 00800:03:49TRACK 01000:03:45
CDDA
TRACK 00100:05:57TRACK 00300:04:07TRACK 00500:03:17TRACK 00700:03:47TRACK 00900:03:53
Music TRACK 003
To remove a track from the playlist, move to 
the track, and then press the  YELLOW (C) 
button. The check on the track is deleted.
Press the  ENTER button to play the selected 
tracks.
The selected track will automatically play.
 s Pause  Tools  r Return
+  00:08 / 05:57
1/1
TRACK 001
05:57
TRACK 00204:27
TRACK 00304:07
Playlist
TRACK 001
To go to the Music List, press the STOP  ( ) 
or  RETURN  button. 
To go to the Playlist, press the  ENTER 
button. 
NOTE
You can create a playlist with up to 99 tracks 
from an Audio CD (CD-DA).
2.
3.
4.
5.
6.
7.
✎

H T-C 9950W _X AA_0820.in dd   6 1HT-C9950W_XAA_0820.indd   612010-0 8-2 0     3 :4 7:2 12010-08-20    3:47:21
 
						

							
62 English
Basic Functions
Sound Mode
DSP (Digital Signal Processor) Function
This will regulate and stabilize the volume level 
against a drastic volume change when changing 
channels or during a scene transition.
Press the DSP button.
SMART SOUND     MP3 ENHANCE    
POWER BASS     DSP OFF
•    SMART SOUND  : This will regulate and 
stabilize the volume level against a drastic 
volume change when changing channels or 
during a scene transition.
•    MP3 ENHANCE  : This also helps enhance 
your sound experience (ex. mp3 music). You 
can upscale your MP3 level sound (24 kHz, 
8bit) to CD level sound (44.1 kHz, 16bit).
•    POWER BASS  : This function enhances low 
tones providing thudding sound effects.
SFE (Sound Field Effect) MODE
You can set the SFE mode best suited for the 
type of music you are listening to.
Press the  SFE MODE  button.
HALL1 Provides a clear vocal as if 
listening in a concert hall.
HALL2 Also provides a clear vocal as if 
listening in a concert hall, but less 
powerful than HALL1.
JAZZ Recommended setting for Jazz.
CHURCH Gives the feel of being in a grand 
church. 
ROCK Recommended setting for Rock.
SFE OFF Select this for normal listening.
Dolby Pro Logic  II Mode
You can select the desired Dolby Pro 
Logic  II audio mode. 
Press the 
PL  II button.
Setting the speakers to DPL IIz
Set the DPL IIz speaker setting to “On”. 
(For further details, refer to page 44.)
 -  
Press the PL II  button on the 
remote control until "DPL IIz” or “DPL IIz 
OFF” appears on the display. Set to 
“DPL IIz” to enable sound reproduction 
from front left and righ wall speakers 
(See page 27.)
DPLIIz
You can listen to a 2CH sound source in 7.1CH 
surround sound with all speakers active.
-  A specifi c speaker(s) may not be output  depending on the input signal.
DPLIIz  OFF 
Select this option to listen through the front left/
right speakers and the subwoofer only.
4FUUJOH
UIF
TQFBLFST
UP
%1-
**Y
Set the DPL IIz speaker setting to “Off”. 
(For further details, refer to pages 44.)
-   Press the 
PL II  button on the remote 
control until the desired setting is 
displayed. Once you have selected the 
desired mode, you will hear sound through 
the rear speakers. (See page 27.)
MUSIC
When listening to music, you can experience 
sound effects as if you are listening to the 
actual performance.
MOVIEAdds realism to the movie soundtrack.
PROLOG
You can listen to a 2CH sound source in 7.1CH 
surround sound with all speakers active.
-  A specifi c speaker(s) may not be output  depending on the input signal.
MATRIXYou will hear multi channel surround sound.
STEREOSelect this to listen to sound from the front left 
and right speakers and the subwoofer only.
1.
1.
H T-C 9950W _X AA_0820.in dd   6 2HT-C9950W_XAA_0820.indd   622010-0 8-2 0     3 :4 7:2 32010-08-20    3:47:23
 
						

							
English 63
04 Basic Functions
Using the TOOLS button
During the slide show playback, you 
can use various functions by pressing 
the TOOLS  button.
Stop Slide Show
Slide Show Speed  :   Normal
Slide Show Effect  :  Fade1
Background Music
Zoom
Rotate
InformationTools
 > Move " Enter  ' Return
Stop Slide Show  : Select to stop the slide 
show.
Slide Show Speed  : Select to adjust the Slide 
Show speed.
Slide Show Effect  : Select set the Slide Show 
Effect.
Background Music  : Select to listen to music 
while viewing a slide show.
Zoom  : Select to enlarge the current picture. 
(Enlarge up to 4 times)
Rotate  : Select to rotate the picture. (This 
rotates the picture either clockwise or counter 
clockwise.)
Information  : Shows the picture information 
including the name and size, etc.
NOTE
To enable the Background Music function, 
both the JPEG photo and MP3 the music fi les 
must be contained in the same folder. Sound 
quality can be affected by the bitrate of the 
MP3 fi le, the size of the photo, and the 
encoding method.
•
•
•
•
•
•
•
✎

NOTE
The Dolby Prologic II is not available for sound 
source encoded in 7.1 CH format or HD sound.
For 2 channel audio CD/MP3 playback, wireless 
receiver does not produce sound (for rear and 
front center/height speakers).
For sound source of DVD 5.1 CH, BD 5.1/7.1 
CH, the wireless receiver produces sound (for 
rear and front center/height speakers) regardless 
of the sound settings. For 2 channel audio 
CD/MP3/TV broadcast, set the Dolby Prologic to 
ON  to make wireless receiver produce sound (for 
rear and front center/height speakers).
When selecting Dolby Pro Logic  II mode, 
connect your external device to the AUDIO 
INPUT jacks (L and R) on the product. If you 
connect to only one of the inputs (L or R), you 
cannot listen to surround sound.
This mode is available with both 2 channel 
and 5.1 channel audio. 7.1ch audio is directly 
transmitted without any transformation.
Playing Back Pictures
G
Playing a JPEG Disc
Insert a JPEG disc into the disc tray.
Press the ◄► buttons to select the  Photos, 
and then press the  ENTER button.
Press the ▲▼◄► buttons to select the 
folder you want to play, and then press the 
ENTER  button.
Press the ▲▼◄► buttons to select the 
photo you want to play, and then press the 
ENTER  button.
NOTE
You can't enlarge the subtitle and PG graphic 
in the full screen mode.
✎





1.
2.
3.
4.
✎

HT-C 9950W _X AA_0820.in dd   6 3HT-C9950W_XAA_0820.indd   632010-0 8-2 0     3 :4 7:2 42010-08-20    3:47:24
 
						

							
64 English
Basic Functions
Playing back a USB Storage
F
You can use the USB connection to play multimedia 
fi les (MP3, JPEG, DivX, etc) downloaded from the 
USB storage device.
Move to the home menu.In Stop mode, connect the USB storage device to 
the USB port on the rear panel of the product.
The message “Do you want to access the 
device?” will be displayed.
Press the ◄► button to select Yes, and then 
press the  ENTER button.
Press the  RED (A) button.
internet radioYou Tube
        USB a Change Device  Safely Remove USB d View Devices " Enter
Please activate Internet@TV service
to enjoy a variety of Internet Services.
CD
USB
Press the ▲▼ buttons to select USB, and 
then press the  ENTER button.
Press the ◄► buttons to select the desired Videos, 
Music, or Photos, and then press the  ENTER 
button.
4-1.  Press the  BLUE (D) button.
        USB   d Home " Enter
Please activate Internet@TV service
to enjoy a variety of Internet Services.
USB
5-1.   Press the ◄► buttons to select USB, and 
then press the  ENTER button.
6-1. Press the ▲▼ buttons to select the desired  
   Videos, Music, or Photos,and then press 
the ENTER  button.
7.  For playing back Video, Music or Photos 
fi les, see pages 55~63.
1.
2.
3.
4.
5.
6. NOTE
You must remove the USB storage device 
safely by performing the “Safe to Remove 
Hardware” function to prevent possible 
damage to the USB memory. Press the 
MENU 
button to move to the main screen, select the 
YELLOW (C)  button, and then press the  ENTER 
button.
When Audio-CD (CD-DA), MP3 and JPEG fi les 
are in stop mode, the  FULL SCREEN button on 
the remote does not work.
If you insert the disc when playing a USB 
storage device, the device mode is changed to 
“DVD or CD” automatically.
To listen to your music fi les with 7.1 channel sound, 
you must set the Dolby Pro Logic ll mode to Matrix. 
(See page 63)
✎




H T-C 9950W _X AA_0820.in dd   6 4HT-C9950W_XAA_0820.indd   642010-0 8-2 0     3 :4 7:2 82010-08-20    3:47:28
 
						

							
English 65
04 Basic Functions
Listening to Radio
Using buttons on the Remote Control
Press the FUNCTION  button to select  TUNER.
Tune in to the desired station.
Automatic Tuning 1  : When you press the # 
$  button, you select a preset broadcast station.
Automatic Tuning 2  : Press and hold the 
TUNING/CH  () button to automatically 
search for active broadcasting stations. 
Manual Tuning  : Press the TUNING/CH  
(
) button to increase or decrease the 
frequency incrementally.
Setting Mono/Stereo
Press the  MO/ST button. 
Each time you press the button, the 
sound switches between  STEREO 
and  MONO .
In a poor reception area, select 
MONO  for a clear, interference-free broadcast.
Presetting Stations
Example : Presetting FM 89.10 into memory 
Press the  FUNCTION  button to select  TUNER.Press the  TUNING/CH  
() button to select 
.
Press the  TUNER MEMORY  button. 
NUMBER fl ashes on the display.
Press the  # $ button to select 
a preset number.
You can select between 1 and 15 
presets.
Press the  TUNER MEMORY  button again.
Press the  TUNER MEMORY  button before 
NUMBER disappears from the display.
NUMBER disappears from the display and 
the station is stored in memory.
To preset another station, repeat steps 2 to 5. 
To tune in to a preset station, press the  # $ 
button  on the remote control to select a channel.
1.
2.
•
•
•
•
• 1.
2.
3. •
4.
•
5. •
•
6. •
Use iPod/iPhone with a Wireless Dock  Cradle for iPod/iPhone
You can enjoy fi ner quality music through the 
speakers by transmitting an iPod/iPhone’s audio 
signal using a Wireless Transmitter. 
The Wireless Transmitter's linking ID is preset at 
the factory and the main unit and Wireless 
Transmitter should link (connect wirelessly) 
automatically when the main unit is turned on. If 
the link indicator does not light when you turn on 
the main unit and Wireless Transmitter, you must 
set the ID manually. (See page 66)
Turn on the main unit and connect the iPod/
iPhone to the Wireless transmitter.
Then, press the  FUNC. button on the product to 
select " iPod" mode.
The  FUNC.  mode of the main unit switches as 
follows:  BD/DVD   D.IN   AUX   iPod   
HDMI 1   HDMI 2   TUNER  ( See page 16) 
How to charge the Wireless Transmitter
STAN DBYLINK
CHARGE
-:
-<
CH
ARG E
STANDB Y
Connect the Wireless Transmitter to the 
Charging Cradle. 
Connect the DC power adaptor to a wall 
socket.
The charging indicator lights and charging 
starts. After the battery is fully charged, the 
charging indicator turns Green.
Operation status of the charging cradle's LED
Display Function
GREEN LED ON             Power on /Charging 
completed
RED  LED  ON                   Charging.
1.
2.
•
HT-C 9950W _X AA_0820.in dd   6 5HT-C9950W_XAA_0820.indd   652010-0 8-2 0     3 :4 7:3 12010-08-20    3:47:31
 
						

							
66 English
Basic Functions
NOTE
The LED indicates the charging state of the 
built-in battery in the wireless iPod transmitter.
Check the charging state of iPod/iPhone by 
checking the charging indication of its battery. 
CAUTION
You can charge the Wireless Transmitter 
with the supplied adaptor only.
iPod/iPhone models you can use with 
this product.
iPod touch (3rd generation) 
iPod touch (2nd generation)
iPod touch (1st generation)
iPod classic iPod with video 
iPod with dock connector iPod with Click Wheel 
iPod nano (5th generation)iPod nano (4th generation)
iPod nano (3rd generation)
iPod nano (2nd generation)
iPod nano (1st generation)
iPhone 3GSiPhone 3G
iPhone
NOTE
“Made for iPod” means 
that an electronic 
accessory has been 
designed to connect specifi cally to iPod and has 
been certifi ed by the developer to meet Apple 
performance standards.
“Made for iPhone” means that an electronic 
accessory has been designed to connect 
specifi cally to iPhone and has been certifi ed by 
the developer to meet Apple performance 
standards.
Apple is not responsible for the operation of this 
device or its compliance with safety and 
regulatory standards.
The volume control may not operated normally 
with iPod and iPhone models not listed above. If 
you have a problem with any of the models listed 
above, please update the software of the iPod/
iPhone to the lastest version.  
✎

!
















✎




How to Link the Wireless Transmitter with the Main Unit
Turn off your Home Theater.
Press the 4, 7 , 6 , 3  buttons on the remote 
control in order.
The Power LED blinks once.
Connect the iPod/iPhone to the Wireless 
transmitter.
S TA N D BYLIN K
CH ARG E
Turn on the iPod/iPhone. Press the " ID SET" 
button on the back of the Wireless 
transmitter for 5 seconds. The link light on 
the wireless transmitter blinks rapidly.
Turn on your product. 
To listen to music from iPod/iPhone over the 
product, press the  FUNC. button on the 
product to select " iPod" mode.
After you select " iPod" mode, turn the 
volume of the product down to avoid hearing 
damage.
You can control the speaker volume of iPod/
iPhone with a volume wheel or a volume bar. 
When iPod/iPhone is stopped or in a power 
saving mode, the Wireless transmitter enters 
Sleep Mode.
When iPod/iPhone is set to Deep Sleep 
Mode, the Wireless transmitter turns off.
1.
2.
•
3.
4.
5. •
•
•
•
HT-C 9950W _X AA_0820.in dd   6 6HT-C9950W_XAA_0820.indd   662010-0 8-2 0     3 :4 7:3 32010-08-20    3:47:33
 
						

							
English 67
04 Basic Functions
Operation status of the wireless 
transmitter's LED
CHARGE
STANDBYLIN
K
STANDB Y
LINK
Display Function
LINK
(Blue LED) STANDBY 
(Red LED)
LED ON Pairing 
successfully  completed  STANDBY
LED  BLINK  
(Long blink) Processing iPod/
iPhone LOW BATTERY
LED  BLINK  
(Short blink)  Processing 
pairing Pairing failed
CAUTION
If you use the main unit near a wireless device 
such as a laptop computer, an AP, or Wifi , an 
unstable operation error can occur.
Do not pair the SWA-5000 and iPod/iPhone at 
the same time. If you pair them at the same 
time, the iPod/iPhone and SWA-5000 may not 
connect to the product.
The transmission distance from the product to 
the wireless transmitter is about 16.4 feet, but 
may vary depending on your operation 
environment.
The audio signal may be weakened or even 
lost where there is an obstacle such as a wall 
or partition between the product and wireless 
transmitter. You can also weaken or lose signal 
if you move the wireless transmitter around.
!




H
T-C 9950W _X AA_0820.in dd   6 7HT-C9950W_XAA_0820.indd   672010-0 8-2 0     3 :4 7:3 92010-08-20    3:47:39
 
						

							
68 English
Network Services
You can enjoy various network services such as 
Internet@TV or BD-LIVE by connecting the 
product to the network system.
Check the following instructions before using 
any network service.Connect the product to the network.
(see pages 36~37)
Confi gure the network settings. 
(see pages 49~52)
1.
2.
Using Internet@TV
Connect this product to a network to download 
various for a fee or free-of-charge applications. 
Internet@TV brings useful and entertaining 
content and services directly from the web to 
your product such as news, weather forecasts, 
stock market quotes, games, movies and music.
You can also initiate this function by 
pressing the  INTERNET@  
button on the remote control.
Getting Started with Internet@TV
Move to the home menu.
internet radioYou Tube
No Disc a Change Device   d View Devices " Enter
Please activate Internet@TV service
to enjoy a variety of Internet Services.
Press the ◄► buttons to select  Internet@
TV  and press the  ENTER button.
In the start screen of the Internet@TV service, you 
will see the service agreement screen. 
You must agree to the service terms and 
conditions before you can use the Internet@TV 
service.
1.
2.
3.
After you have signed off on the service 
agreement, the Internet@TV service starts 
updating. It takes several minutes. When the 
update is complete, you will see the 
Internet@TV menu screen.
Internet@TV at a Glance 
Contents 1Contents 2Contents 3Contents 4
Contents 1Contents 2Contents 3My Applications Recommended
by Date 1/3
 a Login b Mark as Favorite  d Sort by ' Return
1
5
64
23
Settings
Samsung AppS
1Commercial  : Displays Internet@TV Guide, 
product information, and new application 
introduction.
2Recommended  : Displays recommended 
contents managed by Samsung. 
3My Application  : Displays your personal gallery 
in which you can add and delete applications.
4
Navigation Help  : Displays remote control 
buttons available.
RED (A)  : To log in to to Internet@TV.
GREEN (B)  : To mark the application as 
a favorite.
BLUE (D)  : To sort the applications.
Return  : To return to the previous 
menu.•
•
•
•
5
Settings  : You can set the system setup and 
create accounts, etc.
6Samsung AppS  : You can download various 
for-a fee or free-of-charge application services.
4.
INTERNET @
HT-C 9950W _X AA_0820.in dd   6 8HT-C9950W_XAA_0820.indd   682010-0 8-2 0     3 :4 7:3 92010-08-20    3:47:39
 
						

							
English 69
05 Network Services
Using the Keypad
Through your remote, you can use the On-Screen 
Keypad in several Internet@TV applications to enter 
text.
Language : English
1The current keypad.
Use to enter characters.
2Press the DISC MENU  button on the remote 
control to shift the input mode.
: ab, Ab, AB, numbers or icons.
3Displays the current input mode.
4Press the  GREEN (B)  button on the remote 
control to change the input method. (T9 or ABC)
5Press the  TOOLS button on the remote control 
to change the language.
6Press the  TITLE MENU  button on the remote 
control to delete a character.
Entering Text and Numbers
To enter text, press the number button on the 
remote that corresponds to the letter you want to 
enter. Press the button rapidly to enter a letter that 
is not the fi rst letter listed on the On-Screen keypad 
button. For example, if you want to enter the letter 
b, press the 2 button on your remote rapidly twice. 
To enter the fi rst letter listed on a button, press, 
release, and then wait.
To move within the text, use the Arrow buttons. 
To delete text, move the cursor to the right of the 
character you want to delete, and then press the  TITLE 
MENU  button. To change case or enter numbers or 
punctuation, press the  DISC MENU button.
NOTE
Samsung Electronics shall take no legal respon-
sibility for any interruption of the Internet@TV 
service caused by the service provider for any 
reason.
The Internet@TV service is to download and 
process data via the Internet so that you can 
enjoy the contents on your TV screen.
If the Internet connection is unstable, the service 
may be delayed or interrupted.
Furthermore, the player may turn off automati-
cally. If this occurs, check the Internet 
connection and try again.
Application services may be provided in English 
only and the contents available may vary, 
depending on the area.
For more information about an Internet@TV 
service, visit the web site of the applicable 
service provider.
The provided services are subject to change 
without notice, depending on the Internet@TV 
service provider.
The Internet@TV service contents may differ 
depending on the fi rmware version.
For-a-fee DivX contents with copy protection 
can only be played using HDMI cable.
If you have connected your product to your TV 
using the Audio/Video cable, the DivX video 
signal can not output. The popup message 
“Connect with a HDMI cable to play this fi le.” or 
“Cannot play current fi le.” will be displayed.
Confi gure the network settings before using In-
ternet@TV. For more information, see “Network 
Connection” on page 49.
Fonts not supported by Internet@TV within a 
provider’s content may not display normally.
Internet@TV is not available in some locations.
Depending on a content provider’s circumtanc-
es, an application’s updates or the application 
itself may be discontinued.
Depending on your country’s regulations, some 
applications may have limited service or not be 
supported.
When the TV is displaying the Internet@TV 
screen or any of its subsidiary menu screens, 
you have 60 seconds to make a selection. If you 
don’t push a button or make a selection in 60 
seconds, Internet@TV closes.✎ ▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
HT-C 9950W _X AA_0820.in dd   6 9HT-C9950W_XAA_0820.indd   692010-0 8-2 0     3 :4 7:4 22010-08-20    3:47:42
 
						

							
70 English
Network Services
Starting Internet@TV for the First Time
To start up Internet@TV for the fi rst time, follow 
these steps:
Access Internet@TV as described on the 
previous page. The Internet@TV screen 
appears. In most cases, immediately after, 
the Country screen appears.
If the Country screen has appeared, use the 
▲▼◄►buttons to select your country. 
When done, press Enter.
NOTECertain applications are available only in certain 
countries. 
The General Disclaimer screen appears. Use 
the ◄► buttons to move to Agree, and then 
press Enter.
NOTEScreens can take a few seconds to appear.
The Internet Privacy Policy screen appears. 
Use the ◄► buttons to move to Agree, and 
then press Enter.
The Service Update screen appears and 
installs a number of services and 
applications. When done, it closes. The 
applications and services downloaded are 
listed on the Internet@TV screen.
NOTEInternet@TV may close momentarily during the 
installation process.
A number of screens appear after installation. 
You can press Enter to close them or let them 
close on their own.
To start an application, use the ▲▼◄► 
buttons to highlight the application, and then 
press Enter. The application starts. 
Account Login
For a more enjoyable application experience, 
register and log in to your account. 
To do this, you must create an account fi rst. 
(For instructions on creating an account, refer to 
Internet@TV ID on page 71.)
Press the ▲▼◄► buttons to select the 
desired application and press the  RED (A) 
button.
1.
2.
✎ ▪
3.
✎▪
4.
5.
✎▪
▪
6.
1.
Enter your user account and password.
Settings
Create IDs and confi gure Internet@TV settings 
on this screen. To accesss the Settings screen, 
click the Settings button on lower left of the main 
Internet@TV screen.
System Setup
Change the Service Lock password
The Service Lock password function lets you set 
a password that you can then use to establish 
password controlled access to Internet@TV 
services such as Netfl ix and Blockbuster. After you 
have set the password, you then set a service to 
locked or unlocked on the Service Manager screen. 
When a service is locked, you must enter the 
Service Lock password to access it.
To use the Service Lock function, follow these 
steps:
Highlight Change the Service Lock password 
on the Settngs screen, and then press Enter.
On the screen that appears, enter the current 
password. If this is the fi rst time you are 
using the Service Lock function, enter the 
default password, 0-0-0-0, using your 
remote. The next screen appears.
2.
1.
2.
 System setup Internet@TV ID
  Service Manager
  Properties
Settings
Change the Service Lock passwordReset
          '  Cancel
HT-C 9950W _X AA_0820.in dd   7 0HT-C9950W_XAA_0820.indd   702010-0 8-2 0     3 :4 7:4 32010-08-20    3:47:43