Samsung Ht Bd8200 User Manual

21
ENG
●  CONNECTIONS
INSTALLING THE WALL MOUNT
1.  Disconnect the cradle stand from the unit.
2.  Peel off the fi lm from the double-sided adhesive sheet 
for the wall mount and attach it on a clean wall.
3. 
Secure the wall mount bracket using 6 screws (not 
supplied) while aligning holes marked on the sheet.
4.  Attach the back unit bracket(bracket set mount) with 
the Home Theater unit by fastening provided 4 screws.
5. 
Fully insert the back bracket’s clasp into 
the wall mount bracket’s receptacle...

22
Connections
CONNECTING THE VIDEO OUT TO YOUR TV
Choose one of the two methods for connecting to a TV.
  METHOD 1 : HDMI (BEST)
Connect the HDMI cable (not supplied) from the HDMI OUT jack on the ba\
ck of the Blu-ray Home Theater 
to the HDMI IN jack on your TV.
Depending on your TV, certain HDMI output resolutions may not work.
If an HDMI cable is connected from the player to a TV, the Blu-ray Home \
Theater’s output is set to 
HDMI automatically within 10 seconds.
When you connect the player to the...

23
ENG
●  CONNECTIONS
HDMI Auto Detection Function
The players video output will automatically change to HDMI mode when co\
nnecting an HDMI cable 
while power is on. For possible HDMI resolutions, see page 41.
HDMI (High Defi  nition Multimedia Interface)
HDMI is an interface that enables the digital transmission of video and \
audio data with just a single connector.Using HDMI, the Blu-ray Home Theater transmits a digital video and audio\
 signal and displays a vivid picture on a 
TV having an HDMI...

24
Connections
CONNECTING AN iPod
You can enjoy music and video fi les from an iPod through the main unit. For iPod operation with this Blu\
-ray home 
theater, see pages 25 and 78 ~ 80.     Connect the iPod Dock to the iPod Jack on the rear side of the main unit\
.
  Place the iPod in the dock.  “iPod Connected” message appears on the TV screen.
 You must have the VIDEO output connected to your TV to view iPod video (\
See page 25).
As the cable ports are close together, be sure to remove the USB memory...

25
ENG
●  CONNECTIONS
iPod models that can be used with the HT-BD8200
“Made for iPod” means that an electronic accessory has been design\
ed to connect specifically to the 
iPod and has been certified by the developer to meet Apple performance\
 standards.
“Works with iPhone” means that an electronic accessory has been de\
signed to connect 
specifically to an iPhone and has been certified by the developer to\
 meet Apple performance 
standards.
Apple is not responsible for the operation of this device or...

26
Connections
CONNECTING AUDIO FROM EXTERNAL COMPONENTS
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-T\
op Box).      Connect the Digital Input (OPTICAL) on the main unit to the Digital Ou\
tput of the external digital 
component.
  Press the  FUNCTION  button on the main unit to select  DIGITAL input.
The mode switches as follows :  BD/DVD ➞ DIGITAL  ➞  AUX  ➞  TUNER .
To see video from your Cable Box/Satellite receiver, you...

27
ENG
●  CONNECTIONS
AUX : Connecting an External Analog Component
Analog signal components such as a VCR.
      Connect AUX IN (Audio) on the main unit to the Audio Out of the extern\
al analog component.
 
Be sure to match connector colors.
 
Press the  AUX button on the remote control to select  AUX input. 
You can also use the  FUNCTION button on the main unit.
The mode switches as follows :  BD/DVD ➞ DIGITAL  ➞  AUX  ➞  TUNER .
  
You can connect the Video Output jack of your VCR to the TV, and...

28
Connections
CONNECTING TO THE NETWORK
To access network service or upgrade the current fi rmware, you must make one of the following connections.
By connecting to a network, you can access the BD-LIVE, Blockbuster, Net\
fl ix, Pandora, YouTube services, PC
streaming and Software upgrades from Samsung’s update server. We reco\
mmend you use an AP or router for the network.
If you don’t have one, you'll need two network providing services to \
use the PC streaming function.
Case 1 : Connecting a...

29
ENG
●  CONNECTIONS
Case 2 : Connecting to a Wireless IP sharer
You can connect to network with a Wireless IP sharer. See page 50 for Wi\
reless Network Setup.
This unit is compatible with the Samsung Wireless LAN Adapter only.
(Model name: WIS09ABGN). 
You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n\
 is recommended 
for stable operation of the wireless network.)
Wireless LAN, in its nature, may cause interference, depending on the us\
e condition 
(AP performance, distance,...

30
Connections
CONNECTING THE FM ANTENNA
      Connect the FM antenna supplied to the FM 75 Ω COAXIAL Jack.
     Slowly move the antenna wire around until you fi nd a location where reception is good, then fasten it 
to a wall or other rigid surface.
  This unit does not receive AM broadcasts.
COOLING FAN
The cooling fan supplies cool air to the unit to prevent overheating.
Please observe the following cautions for your safety.
Make sure the unit is well-ventilated. If the unit has poor ventilation,\...