Samsung Ht Bd8200 User Manual

31
ENG
●  BASIC FUNCTIONS
This section introduces basic playback functions and playback by disc ty\
pe.
BEFORE PLAYING
Turn on your TV and set it to the correct Video Input (the input the Bl\
u-ray Home Theater is connected to).
After plugging in the player, the fi rst time you press the 
POWER button, this screen comes up: 
If you want to select a language, press a  NUMBER button. 
(This screen will only appear when you plug in the player for 
the fi rst time.) If the language for the startup screen is...

Basic functions of your Blu-ray Home Theater
32
PLAYING A DISC
Press OPEN/CLOSE  button to open the compartment.
Load a disc vertically into the disc slot.
Place a disc gently into the slot with the disc’s label facing out.
Playback starts automatically.
If the disc does not play automatically, it will display the main disc m\
enu. To play a Blu-Ray disc from the disc menu, press  ENTER.
To play a DVD from the disc menu, press  PLAY or ENTER .
When you stop disc play, the player remembers where you...

33
ENG
●  BASIC FUNCTIONS
SETTING THE SOUND
Setting the Power On / Off Melody Sound 
A Melody sound can be set so it is heard each time you turn the player o\
n or off.
With the unit in Stop mode, press the  MENU button.
Press the 
▲▼◄► buttons to select  Setup, then press the 
ENTER  or 
► button.
Press the 
▲▼ buttons to select  System, then press the 
ENTER  or 
► button.
Press the 
▲▼ buttons to select  Power On/Off sound , 
then press the  ENTER or 
► button.
Press the 
▲▼ buttons to select  On or...

Basic functions of your Blu-ray Home Theater
34
SLOW MOTION PLAY/STEP MOTION PLAY
Slow Motion Play                                       hgfZCV
In pause or step mode, press the SLOW button on the 
remote control for Slow Motion play.
If you press the  SLOW button, 
 1/8  1/4  1/2
To return to normal speed playback, press the 
PLAY  (
) button.
This () icon indicates an invalid button press.
  No sound is heard during slow mode. 
  Slow motion operates only in the forward direction.
Step Motion Play...

35
ENG
●  SYSTEM SETUP
SETTING THE CLOCK
Choose your time zone
With the unit in Stop mode, press the  MENU button.
Press the 
▲▼◄► buttons to select  Setup, then press the 
ENTER  or 
► button.
Press the 
▲▼ buttons to select  System, then press the 
ENTER  or 
► button.
Press the 
▲▼ buttons to select  Time Zone, then press the 
ENTER  or 
► button.
Use the 
◄ ► button to place the cursor to the appropriate 
time zone for your area and press the  ENTER button.
To set the time automatically, set the NTP...

Language setup
36
SETTING UP THE LANGUAGE OPTIONS
Once you set the audio, subtitle, disc menu and player menu language opt\
ions, they will be applied automatically 
every time you watch a movie.
If you want to choose a different audio and subtitle language while play\
ing a disc, you can 
also use the disc menu to make the selection.
With the unit in Stop mode, press the MENU button.
Press the 
▲▼◄► buttons to select  Setup, then press 
the  ENTER  or
 ► button.    
Press the 
▲▼ buttons to select...

37
ENG
●  AUDIO SETUP
SETTING UP THE SPEAKER OPTIONS
Dynamic Compression
This is only active when a Dolby Digital signal is detected.  
On  : When Movie soundtracks are played at low volume or 
from smaller speakers, the system can apply appropriate 
compression to make low-level content more intelligible and 
prevent dramatic passages from getting too loud.
Off  : You can enjoy the movie with the standard Dynamic 
Range. 
AV Sync
Video may look slower than the audio when the player is
connected to a...

Audio setup
38
SETTING UP THE SPEAKER OPTIONS
Setting the Speaker Distance
If the location of the unit is different from the listening position, yo\
u can adjust the delay time of the audio 
signals from the units speakers and the subwoofer.With the unit in Stop mode, press the  MENU button.
Press the 
▲▼◄► buttons to select  Setup, then press the 
ENTER  or 
► button. 
Press the 
▲▼ buttons to select  Audio, then press the 
ENTER  or 
► button.
Audio setup menu will be displayed.
Press the ▲▼ buttons...

39
ENG
●  AUDIO SETUP
V-SOUND (Virtual Sound)
Produces realistic sound through 2.1 channel audio system 
with the aid of virtual effects, this gives you the feeling you are 
listening to 5.1 channel audio system.
Press the  V-SOUND  button.
Each time the button is pressed, the selection changes as 
follows :
 V.SOUND ON 
   V.SOUND OFF
Only the multi-channel is supported.
DSP Function
Press the  DSP button.
Each time the button is pressed, the selection changes as 
follows:
 SMART SOUND 
   AUDIO...

Display setup
40
SETTING UP THE DISPLAY OPTIONS
This function allows you to setup the TV screen settings. This function \
depends on the disc or TV type. It may not 
work with some discs or TVs.With the unit in Stop mode, press the  MENU button.
Press the 
▲▼◄► buttons to select  Setup, then press the 
ENTER  or 
► button.
Press the 
▲▼ buttons to select  Display, then press the 
ENTER  or
 ► button.
Video setup menu will be displayed.
Press the 
▲▼ buttons to select the desired display option 
from the...