Samsung Ht Bd7255 User Manual

31
ENG
●  CONNECTIONS
Case 2 : Connecting to a Wireless IP sharer
You can connect to network with a Wireless IP sharer. See page 52 for Wi\
reless Network Setup.
This unit is compatible with only Samsung Wireless LAN Adapter. (not su\
pplied)
(Model name: WIS09ABGN). 
- The Samsung Wireless LAN Adapter is sold separately.
- Contact a Samsung Electronics agent or service center for purchasing.
You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n\
 is recommended 
for stable operation...

32
Connections
CONNECTING THE FM ANTENNA
      Connect the FM antenna supplied to the FM 75 Ω COAXIAL Jack.
     Slowly move the antenna wire around until you fi nd a location where reception is good, then fasten it 
to a wall or other rigid surface.
  This unit does not receive AM broadcasts.
COOLING FAN
The cooling fan supplies cool air to the unit to  prevent overheating.
Please observe the following cautions for your safety.
Make sure the unit is well-ventilated. If the unit has poor ventilation,\...

33
ENG
●  BASIC FUNCTIONS
This section introduces basic playback functions and playback by disc ty\
pe.
BEFORE PLAYING
Turn on your TV and set it to the correct Video Input (the input the Bl\
u-ray Home Cinema is connected to).
If you connected an external Audio System, turn on your Audio System and\
 set it to the correct Audio Input.
After plugging in the player, the fi rst time you press the 
POWER button, this screen comes up: 
If you want to select a language, press a  NUMBER button. 
(This screen...

Basic functions of your Blu-ray Home Cinema
34
ON-SCREEN MENU NAVIGATION
PLAYING A DISC
Load a disc.Place a disc gently into the tray with the disc’s label facing up.
Close the compartment by pressing the  PLAY button.
Playback starts automatically.
When you stop disc play, the player remembers where you stopped, so when\
 you press 
PLAY  button again, it will pick up where you left off. This is called the "R\
esume" function.
With some Blu-ray discs(BD-J), this function may not work.
Press the...

35
ENG
●  BASIC FUNCTIONS
SETTING THE SOUND
Setting the Power On / Off Melody Sound 
A Melody sound can be set so it is heard each time you turn the player o\
n or off.
With the unit in Stop mode, press the  MENU button.
Press the 
▲▼ buttons to select  Setup, then press the 
ENTER  or 
► button.
Press the 
▲▼ buttons to select  System Setup, then press 
the  ENTER  or 
► button.
Press the 
▲▼ buttons to select  Power On/Off sound , then 
press the  ENTER or 
► button.
Press the 
▲▼ buttons to select...

Basic functions of your Blu-ray Home Cinema
36
SLOW MOTION PLAY/STEP MOTION PLAY
Slow Motion Play                                              hgfZCV
In pause or step mode, press the SLOW button on the 
remote control for Slow Motion play.
If you press the  SLOW button, 
 1/8  1/4  1/2
To return to normal speed playback, press the 
PLAY  (
) button.
This () icon indicates an invalid button press.
  No sound is heard during slow mode. 
  Slow motion operates only in the forward direction.
Step Motion...

37
ENG
●  SYSTEM SETUP
SETTING THE CLOCK
Choose your time zone
With the unit in Stop mode, press the  MENU button.
Press the 
▲▼ buttons to select  Setup, then press the 
ENTER  or 
► button.
Press the 
▲▼ buttons to select  System Setup, then press 
the  ENTER  or 
► button.
Press the 
▲▼ buttons to select  Time Zone, then press the 
ENTER  or 
► button.
Use the 
◄ ► button to place the cursor to the appropriate 
time zone for your area and press the  ENTER button.
To set the time automatically, set...

Language setup
38
SETTING UP THE LANGUAGE OPTIONS
Once you set the audio, subtitle, disc menu and player menu language opt\
ions, they will be applied automatically 
every time you watch a movie.
If you want to choose a different audio and subtitle language while play\
ing a disc, you can 
also use the disc menu to make the selection.
With the unit in Stop mode, press the MENU button.
Press the 
▲▼ buttons to select  Setup, then press the 
ENTER  or
 ► button.    
Press the 
▲▼ buttons to select...

39
ENG
●  AUDIO SETUP
Audio setup
Setting the Test Tone
Use the Test Tone feature to check the speaker connections.
With the unit in Stop mode, press the  MENU button.
Press the 
▲▼ buttons to select  Setup, then press the 
ENTER  or 
► button. 
Press the 
▲▼ buttons to select  Audio Setup, then press 
the  ENTER  or 
► button.
Audio setup menu will be displayed.
Press the 
▲▼ buttons to select  Test Tone, then press the 
ENTER  or 
► button.
Press the  RED(A) button
A test tone will be sent to  L 
 C...

Audio setup
40
SETTING UP THE SPEAKER OPTIONS
Setting the Speaker Distance
If the speakers cannot be placed at equal distances from the listening p\
osition, you can adjust the delay 
time of the audio signals from the front, subwoofer, centre, surround sp\
eakers.With the unit in Stop mode, press the  MENU button.
Press the 
▲▼ buttons to select  Setup, then press the 
ENTER  or 
► button. 
Press the 
▲▼ buttons to select  Audio Setup, then press 
the  ENTER  or 
► button.
Audio setup menu will be...