Samsung Ht Bd7255 User Manual

							
31
ENG
●  CONNECTIONS
Case 2 : Connecting to a Wireless IP sharer
You can connect to network with a Wireless IP sharer. See page 52 for Wi\
reless Network Setup.
This unit is compatible with only Samsung Wireless LAN Adapter. (not su\
pplied)
(Model name: WIS09ABGN). 
- The Samsung Wireless LAN Adapter is sold separately.
- Contact a Samsung Electronics agent or service center for purchasing.
You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n\
 is recommended 
for stable operation of the wireless network.)
Wireless LAN, in its nature, may cause interference, depending on the us\
e condition (AP 
performance, distance, obstacle, interference by other radio devices, et\
c).
Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not su\
pported.
When applying the security key for the AP (wireless IP sharer), only t\
he following is 
supported.
Authentication Mode : WEP, WPAPSK, WPA2PSK
Encryption Type : WEP, TKIP, AESM




1)
2)
Modem Port
Wireless IP sharer
Modem Cable Wireless LAN 
Adapter
(not supplied)
H T-B D 7255_E LS _0511-1 .in dd   3 1HT-BD7255_ELS_0511-1.indd   312009-0 5-1 9     5 :3 1:5 92009-05-19    5:31:59
 
						

							
32
Connections
CONNECTING THE FM ANTENNA
      Connect the FM antenna supplied to the FM 75 Ω COAXIAL Jack.
     Slowly move the antenna wire around until you fi nd a location where reception is good, then fasten it 
to a wall or other rigid surface.
  This unit does not receive AM broadcasts.
COOLING FAN
The cooling fan supplies cool air to the unit to  prevent overheating.
Please observe the following cautions for your safety.
Make sure the unit is well-ventilated. If the unit has poor ventilation,\
 the temperature inside the unit may rise 
and may damage it.
Do not obstruct the cooling fan or ventilation holes. (If the cooling f\
an or ventilation holes are covered with a 
newspaper or cloth, heat may build up inside the unit and fi re may result.)
ATTACHING THE TOROIDAL FERRITE CORE TO THE POWER CORD 
OF THE MAIN UNIT
If you attach a Toroidal ferrite core to the power cord of the man unit,\
 it will prevent help to prevent RF
interference from radio signals.
      Pull the fi xing tab of the Toroidal ferrite core to open it.
   Make a loop twice in the main unit power cord.
   
Attach the Toroidal ferrite core to the main unit power cord as the fi\
 gure shows and press it until it clicks.
1.
2.
M
•
•
1.
2.
3.
FM Antenna (supplied)
H T-B D 7255_E LS _0519-1 .in dd   3 2HT-BD7255_ELS_0519-1.indd   322009-0 5-1 9     6 :1 2:4 62009-05-19    6:12:46
 
						

							
33
ENG
●  BASIC FUNCTIONS
This section introduces basic playback functions and playback by disc ty\
pe.
BEFORE PLAYING
Turn on your TV and set it to the correct Video Input (the input the Bl\
u-ray Home Cinema is connected to).
If you connected an external Audio System, turn on your Audio System and\
 set it to the correct Audio Input.
After plugging in the player, the fi rst time you press the 
POWER button, this screen comes up: 
If you want to select a language, press a  NUMBER button. 
(This screen will only appear when you plug in the player for 
the fi rst time.) If the language for the startup screen is not set, 
the settings may change whenever you turn the power on or 
off. Therefore, make sure that you select the language you 
want to use. Once you select a menu language, you can 
change it by pressing the  STOP ( ) button on the front panel 
of the unit for more than 5 seconds with no disc in the unit. 
Then the MENU LANGUAGE SELECTION window appears 
again where you can reset your preferred language.
Discs which can be played on this player (For the following discs, the \
ability to play back 
may depend on recording conditions.)
• BD-ROM    • BD-RE   • BD-R
• DVD-R   • DVD-RW (V mode)  • CD-RW/CD-R
•   The unit may not play certain CD-RW/CD-R and DVD-R due to the disc type \
or 
recording conditions.
Discs which cannot be played on this player.
• HD DVD    • DVD+RW    • DVD+R  
• DVD-ROM    • DVD-RAM     • CDV   
• CD-ROM    • CVD    • CD-I   
• Super Audio CD(except CD layer)    • CDGs play audio only, not graphics.
Blu-ray is a new and evolving format. Accordingly, disc compatibility is\
sues with new and 
existing format discs are possible. Not all discs are compatible and not\
 every disc will 
playback. 
For additional information, refer to the Disc Type and Characteristics a\
nd Compliance and 
Compatibility Notice sections of this Manual.  If you encounter compatib\
ility problems, 
please contact SAMSUNG customer care center
.
•
•
M


Basic functions of your Blu-ray Home Cinema
MENU LANGUAGE SELECTION
Press 1 for English
Pulsar 2 para Español
Touche 3 pour Français
Drücken Sie 4 für Deutsch
Premere 5 per Italiano
Druk op 6 voor Nederlands
Macrovision : BBS42
H T-B D 7255_E LS _0511-1 .in dd   3 3HT-BD7255_ELS_0511-1.indd   332009-0 5-1 9     5 :3 2:0 22009-05-19    5:32:02
 
						

							
Basic functions of your Blu-ray Home Cinema
34
ON-SCREEN MENU NAVIGATION
PLAYING A DISC
Load a disc.Place a disc gently into the tray with the disc’s label facing up.
Close the compartment by pressing the  PLAY button.
Playback starts automatically.
When you stop disc play, the player remembers where you stopped, so when\
 you press 
PLAY  button again, it will pick up where you left off. This is called the "R\
esume" function.
With some Blu-ray discs(BD-J), this function may not work.
Press the  STOP button twice during playback to disable the Resume function.
To pause the playback, press the  PAUSE button during playback. 
To resume, press the  PLAY button.
If the player is left in the stop mode more than 5 minutes without any u\
ser interface, a 
screen saver will appear on your TV. If the player is left in the screen\
 saver mode for more 
than 30 minutes, the power will automatically turn off except during pla\
yback of an CD-DA 
(Automatic Power-Off Function).
If no buttons are pressed on the unit or remote control for more than 5 \
minutes when the 
unit is in Pause mode, operation will stop (except for some Blu-ray Dis\
cs).
1.
•
2. •M




Audio
Subtitle
DivX Subtitle
Disc Menu
Menu
TV Aspect
Movie Frame (24 Fs)
Resolution
Progressive Mode
Still Mode
Screen Message
Network Selection
Cable Network
Wireless Network
Proxy
NTP Server
Network Connection Test
BD-LIVE Internet Connection
Video
Music Photo
Setup
System Setup
Language Setup
Audio Setup
Display Setup
HDMI Setup
Network Setup
Parental Setup System Information
Time Zone
Clock Set
Power On/Off sound
BD Data Management
DivX(R) Registration
System Update
Dynamic Compression
AV Sync
Test Tone
Speaker Distance
Sound Edit
Anynet + (HDMI-CEC)
HDMI Format
BD Wise
Picture Mode
HDMI Audio
Parental Lock
Rating Level
New Password 
H
T-B D 7255_E LS _0511-1 .in dd   3 4HT-BD7255_ELS_0511-1.indd   342009-0 5-1 9     5 :3 2:0 22009-05-19    5:32:02
 
						

							
35
ENG
●  BASIC FUNCTIONS
SETTING THE SOUND
Setting the Power On / Off Melody Sound 
A Melody sound can be set so it is heard each time you turn the player o\
n or off.
With the unit in Stop mode, press the  MENU button.
Press the 
▲▼ buttons to select  Setup, then press the 
ENTER  or 
► button.
Press the 
▲▼ buttons to select  System Setup, then press 
the  ENTER  or 
► button.
Press the 
▲▼ buttons to select  Power On/Off sound , then 
press the  ENTER or 
► button.
Press the 
▲▼ buttons to select  On or  Off , then press the 
ENTER  or 
► button.
Press the  MENU button to exit the setup menu.
USING THE SEARCH AND SKIP FUNCTIONS
During play, you can search quickly through a chapter or track, and use \
the skip function to jump to the next selection.
Searching through a Chapter or Track              hgfZCV
During playback, press the SEARCH (  ) button. 
Each time you press the  SEARCH button, the playback speed will change as follows.
BD-ROM, BD-RE, BD-R, DVD-VIDEO, 
DVD-RW, DVD-R X 2   X 4   X 8    X 16    X 32   X 128
 X 2    X 4   X 8    X 16    X 32   X 128
You can scan the program in reverse.
To return to normal speed playback, press the  PLAY button.
No sound is heard during search mode.
Skipping Tracks hgfZCV
During playback, press the  SKIP (   ) button. 
When playing a Blu-ray Disc/DVD, if you press the  SKIP ( 
 ) button, it moves to the next chapter. 
If you press the  SKIP ( 
 ) button, it moves to the beginning of the chapter. One more press mak\
es it 
move to the beginning of the previous chapter.
1.
2.
3.
4.
5.
6.
•
•
M
D VDDVDSystem Setup \bLanguage  Setup
Audio Setup
Display Setup
HDMI Setup
Network Setup
Parental Setup
System Information
Time Zone     
Clock Set
Power On/Off sound  :  On  
►BD Data Management
DivX(R) Registration
System UpdateOnOff
 Music  Photo   
                             
             Setup 
HT-B D 7255_E LS _0511-1 .in dd   3 5HT-BD7255_ELS_0511-1.indd   352009-0 5-1 9     5 :3 2:0 22009-05-19    5:32:02
 
						

							
Basic functions of your Blu-ray Home Cinema
36
SLOW MOTION PLAY/STEP MOTION PLAY
Slow Motion Play                                              hgfZCV
In pause or step mode, press the SLOW button on the 
remote control for Slow Motion play.
If you press the  SLOW button, 
 1/8  1/4  1/2
To return to normal speed playback, press the 
PLAY  (
) button.
This () icon indicates an invalid button press.
  No sound is heard during slow mode. 
  Slow motion operates only in the forward direction.
Step Motion Play      hgfZCV
Press the  STEP button on the remote control during play for Step 
Motion play.
Each time the button is pressed a new frame will appear.
When the  STEP button is pressed, the next frame will be 
activated.
Press the  PLAY (
) button to resume normal play.
  No sound is heard during step mode.
  Step motion operates only in the forward direction.
•
•
M


•
•
•
M

HT-B D 7255_E LS _0511-1 .in dd   3 6HT-BD7255_ELS_0511-1.indd   362009-0 5-1 9     5 :3 2:0 42009-05-19    5:32:04
 
						

							
37
ENG
●  SYSTEM SETUP
SETTING THE CLOCK
Choose your time zone
With the unit in Stop mode, press the  MENU button.
Press the 
▲▼ buttons to select  Setup, then press the 
ENTER  or 
► button.
Press the 
▲▼ buttons to select  System Setup, then press 
the  ENTER  or 
► button.
Press the 
▲▼ buttons to select  Time Zone, then press the 
ENTER  or 
► button.
Use the 
◄ ► button to place the cursor to the appropriate 
time zone for your area and press the  ENTER button.
To set the time automatically, set the NTP server to  On (see page 57).
Set the clock
To setup, follow steps 1 through 3 above.
Press the 
▲▼ buttons to select  Clock Set, then press the 
ENTER  or 
► button.
Press the 
◄ ► buttons to move to “ da.”(date), “ hr” (hour),  
“ min ” (minute) and “ am/pm”. Set the date and time by 
pressing the 
▲▼ buttons, then press the  ENTER button.
1.
2.
3.
4.
5.
M
4.
5.
System setup
DVDDVDSystem Setup  ◄Language Setup
Audio Setup
Display Setup
HDMI Setup
Network Setup
Parental Setup
System Information
Time Zone                                                      ►Clock Set
Power On/Off sound  :  On
BD data management
DivX(R) Registration
System Update
 Music  Photo   
                             
             Setup 
DVDDVDSystem      ◄Language Setup
Audio Setup
Display Setup
HDMI Setup
Network Setup
Parental Setup
System Information
Time Zone                                                       ►Clock Set
Power On/Off sound  :  On
Touch Key Sound  :  On
BD Data Management
System Update
 Music  Photo   
                             
             Setup Time Zone
London, Lisbon
 ◄  GMT + 00:00  ►
                Save                              Return
DVDDVDSystem Setup  ◄Language Setup
Audio Setup
Display Setup
HDMI Setup
Network Setup
Parental Setup
System Information
Time Zone                                                     
Clock Set        
►Power On/Off sound  :  On
BD data management
DivX(R) Registration
System Update
 Music  Photo   
                             
             Setup 
DVDDVDSystem Setup  ◄Language Setup
Audio Setup
Display Setup
HDMI Setup
Network Setup
Parental Setup
System Information
Time Zone                                                     
Clock Set        
►Power On/Off sound  :  On
Touch Key Sound  :  On
BD Data Management
System Update
 Music  Photo   
                             
             Setup 
JAN/01/2009 01 01
da. hr. min.
Thursday
Clock Set
                              Save       Return
HT-B D 7255_E LS _0519-2 .in dd   3 7HT-BD7255_ELS_0519-2.indd   372009-0 5-1 9     5 :3 7:2 62009-05-19    5:37:26
 
						

							
Language setup
38
SETTING UP THE LANGUAGE OPTIONS
Once you set the audio, subtitle, disc menu and player menu language opt\
ions, they will be applied automatically 
every time you watch a movie.
If you want to choose a different audio and subtitle language while play\
ing a disc, you can 
also use the disc menu to make the selection.
With the unit in Stop mode, press the MENU button.
Press the 
▲▼ buttons to select  Setup, then press the 
ENTER  or
 ► button.    
Press the 
▲▼ buttons to select  Language Setup , then 
press the  ENTER or
 ► button. 
Language setup menu will be displayed.
Press the 
▲▼ buttons to select the desired language 
option, press the  ENTER or
 ► button.
Audio  : For the disc audio language.
Subtitle  : For the disc subtitles.
DivX Subtitle  : For the DivX subtitles.
Disc Menu  :  For the disc menu contained on the disc
Menu  : For the on-screen menu of your Blu-ray Home 
Cinema.
Press the 
▲▼ buttons to select the desired language, then press the  ENTER button.
Press the  RETURN or ◄ button to return to the previous menu. Press the  MENU button to 
exit the menu.
The selected language will only appear if it is supported on the disc.
M
1.
2.
3.
4.
•
•
•
•
•
5.
M

System Setup
Language Setup
Audio Setup
Display Setup
HDMI Setup
Network Setup
Parental SetupD VDDVD◄◄
 Music  Photo   
                             
             Setup 
System Setup
Language Setup
Audio Setup
Display Setup
HDMI Setup
Network Setup
Parental SetupAudio  : Original ►Subtitle : Auto
DivX Subtitle   :  Western
Disc Menu  :  English
Menu : AutoDVDDVD
 Music  Photo   
                             
             Setup 
System Setup
Language Setup
Audio Setup
Display Setup
HDMI Setup
Network Setup
Parental SetupAudio  : Original ►Subtitle : Auto
DivX Subtitle   :  Western
Disc Menu  :  English
Menu : AutoOriginal
English
Français
Deutsch
EspañolItaliano
DVDDVD
 Music  Photo   
                             
             Setup 
HT-B D 7255_E LS _0519-2 .in dd   3 8HT-BD7255_ELS_0519-2.indd   382009-0 5-1 9     5 :3 7:3 72009-05-19    5:37:37
 
						

							
39
ENG
●  AUDIO SETUP
Audio setup
Setting the Test Tone
Use the Test Tone feature to check the speaker connections.
With the unit in Stop mode, press the  MENU button.
Press the 
▲▼ buttons to select  Setup, then press the 
ENTER  or 
► button. 
Press the 
▲▼ buttons to select  Audio Setup, then press 
the  ENTER  or 
► button.
Audio setup menu will be displayed.
Press the 
▲▼ buttons to select  Test Tone, then press the 
ENTER  or 
► button.
Press the  RED(A) button
A test tone will be sent to  L 
 C  R  SR  SL  
LFE  in order so you can make sure the speakers are set 
up correctly.
To end the test tone, press the  RED (A) button again.  
Press the RETURN button to return to the previous 
menu. 
When playing a BD/DVD or CD, this will work only in 
Stop mode.
Use this function to check that each speaker is 
correctly connected and that there is no problem.
When HDMI AUDIO is on (audio is produced through 
TV speakers), the TEST TONE function is not 
available.
1.
2.
3.
•
4.
5. •
6.
M



SETTING UP THE SPEAKER OPTIONS
Dynamic Compression
This is only active when a Dolby Digital signal is detected.   On  : When Movie soundtracks are played at low volume or 
from smaller speakers, the system can apply appropriate 
compression to make low-level content more intelligible and 
prevent dramatic passages from getting too loud.
Off  : You can enjoy the movie with the standard Dynamic 
Range. 
AV Sync
Video may look slower than the audio when the player is
connected to a digital TV. If this occurs, adjust the audio
delay time to match the video.  
You can set the audio delay time between 0 ms and 300 ms. 
Set it to the optimal status.
•
•
•Dynamic Compression :   On ►AV Sync  :  50msec
Test Tone 
Speaker Distance
Sound Edit
System Setup
Language Setup 
Audio Setup 
◄Display Setup
HDMI Setup
Network Setup
Parental SetupDVDDVDOnOff
 Music  Photo   
                             
             Setup 
DVDDynamic Compression :   On AV Sync  :  50msecTest Tone 
Speaker Distance
Sound Edit
System Setup
Language Setup 
Audio Setup 
◄Display Setup
HDMI Setup
Network Setup
Parental Setup0msec
25msec
50msec75msec
100msec
125msec
 Music  Photo   
                             
             Setup 
Dynamic Compression :   On ►AV Sync  :  50msec
Test Tone 
Speaker Distance
Sound Edit
System Setup
Language Setup 
Audio Setup 
◄Display Setup
HDMI Setup
Network Setup
Parental SetupDVDDVD
 Music  Photo   
                             
             Setup 
DVD
Dynamic Compression :   On AV Sync  :  50msecTest Tone                                 ►Speaker Distance
Sound Edit
System Setup
Language Setup 
Audio Setup 
◄Display Setup
HDMI Setup
Network Setup
Parental Setup
 Music  Photo   
                             
             Setup 
DVD
Dynamic Compression :   On AV Sync  :  50msecTest Tone                                  ►Speaker Distance
Sound Edit
System Setup
Language Setup 
Audio Setup        
◄Display 
Setup
HDMI 
Setup
Network 
Setup
Parental Setup
 Music  Photo   
                             
             Setup Test Tone
Stop Return
A Surround Left
USER
H
T-B D 7255_E LS _0522-2 .in dd   3 9HT-BD7255_ELS_0522-2.indd   392009-0 5-2 2     1 1:2 7:1 52009-05-22    11:27:15
 
						

							
Audio setup
40
SETTING UP THE SPEAKER OPTIONS
Setting the Speaker Distance
If the speakers cannot be placed at equal distances from the listening p\
osition, you can adjust the delay 
time of the audio signals from the front, subwoofer, centre, surround sp\
eakers.With the unit in Stop mode, press the  MENU button.
Press the 
▲▼ buttons to select  Setup, then press the 
ENTER  or 
► button. 
Press the 
▲▼ buttons to select  Audio Setup, then press 
the  ENTER  or 
► button.
Audio setup menu will be displayed.
Press the ▲▼ buttons to select  Speaker Distance , 
then press the  ENTER or 
► button.
Press the 
▲▼ buttons to select the desired Speaker, 
then press the 
◄► buttons to set the Speaker Distance.
You can set the Speaker Distance between 0.3m and 9m.
When done, use the ▲▼◄► buttons to select  Save, 
then press the  ENTER button.
If you don’t want to save your settings, use the 
▲▼◄► 
buttons to select  Cancel, then press the  ENTER button.
Press the  RETURN button to return to the previous menu. 
Setting the Sound Edit
You can adjust the balance and level for each speaker.
With the unit in Stop mode, press the  MENU button.
Press the 
▲▼ buttons to select  Setup, then press the 
ENTER  or 
► button.
Press the 
▲▼ buttons to select  Audio Setup, then press 
the  ENTER  or 
► button.Audio setup menu will be displayed.
1.
2.
3.
•
4.
5.
•
6.
M
1.
2.
3.
•
Dynamic Compression :   On ►AV Sync  :  50msec
Test Tone 
Speaker Distance
Sound Edit
System Setup
Language Setup 
Audio Setup 
◄Display Setup
HDMI Setup
Network Setup
Parental SetupDVDDVD
 Music  Photo   
                             
             Setup 
System Setup
Language Setup 
Audio Setup 
◄Display Setup
HDMI Setup
Network Setup
Parental SetupDVDDVD
Dynamic Compression :   On AV Sync  :  50msec
Test Tone 
Speaker Distance                                           ►Sound Edit
 Music  Photo   
                             
             Setup 
Dynamic Compression :   On ►AV Sync  :  50msec
Test Tone 
Speaker Distance
Sound Edit
System Setup
Language Setup 
Audio Setup 
◄Display Setup
HDMI Setup
Network Setup
Parental SetupDVDDVD
 Music  Photo   
                             
             Setup 
System Setup
Language Setup 
Audio Setup        
◄Display Setup
HDMI Setup
Network Setup
Parental SetupDVDDVD
Dynamic Compression :   On AV Sync  :  50msec
Test Tone 
Speaker Distance                                           ►Sound Edit
 Music  Photo   
                             
             Setup Speaker Distance
SaveCancel
Front
Subwoofer
Center
Surround 10ft (3.0m)
10ft (3.0m)
10ft (3.0m)
10ft (3.0m)
ReturnMove ▲
▼Adjust ▲
▼Test Tone 
A
H
T-B D 7255_E LS _0519-2 .in dd   4 0HT-BD7255_ELS_0519-2.indd   402009-0 5-1 9     5 :3 7:4 92009-05-19    5:37:49