Samsung Ht Bd7255 User Manual

51
ENG
●  NETWORK SETUP
Network setup
SETTING UP THE NETWORK SETUP OPTIONS
To obtain information on the proper settings, check the network settings\
 on your computer or contact 
your Internet provider.
To set the network of your Blu-ray Home Cinema, follow the steps below.
With the unit in Stop mode/No Disc mode, press the 
MENU  button.
Press the 
▲▼ buttons to select  Setup, then press the 
ENTER  or 
► button.
Press the 
▲▼ buttons to select  Network Setup, then 
press the  ENTER or 
► button.
Press...

Network setup
52
SETTING UP THE NETWORK SETUP OPTIONS
Press the ▲▼ buttons to select a desired item, then 
press the  ENTER button.
If DHCP is set to  Off and, DNS to Manual, enter 
your IP Address, Subnet Mask, Gateway and 
Primary DNS settings (Secondary DNS is optional).
If DHCP is set to  On and, DNS to Manual, enter 
your Primary DNS setting (Secondary DNS is 
optional).
If DHCP is set to  On and, DNS to Auto, you don’t 
need further or additional settings. 
When you select an item, use the number...

53
ENG
●  NETWORK SETUP
Press the ▲▼ buttons to select  DHCP, then press the 
ENTER  button.
If DHCP is set to  On, you can't select IP Address, 
Subnet Mask or Gateway.
If DNS is set to  Auto, you can’t select Primary/ 
Secondary DNS.
Press the ▲▼ buttons to select a desired item, then press 
the  ENTER  button.
Select an Access Point, and then press the  ENTER 
button to display available list of APs.
(It may take several seconds to search.)
- When you select an AP and press the  ENTER...

Network setup
54
SETTING UP THE NETWORK SETUP OPTIONS
If DHCP is set to On and, DNS to Manual, enter 
your DNS Server.
If DHCP is set to  On and, DNS to Auto, you don’t 
need further or additional settings. 
When you select an item, use the number and 
▲▼◄ ►  buttons.
If the automatic settings don’t work, contact 
your ISP.
When done, use the ▲▼ buttons to select  Save, then press the  ENTER button.
If you don’t want to save your work, use the 
▲▼◄ ► buttons to select  Cancel, then press the 
ENTER...

55
ENG
●  NETWORK SETUP
NTP Server (Used to Retrieve Time Information from NTP Server)
To setup, follow steps 1~3 on page 51.
Press the 
▲▼ buttons to select  NTP Server, then press 
the  ENTER  or 
► button.
On  : the player automatically connects to the Internet 
server in order to adjust the time setting.
Off  : the player does not connect to the Internet server 
to adjust the time setting.
Network Connection Test
Use this menu to check whether your network connection is 
working or not.
To setup,...

BD data management
56
BD Data (stored in external USB fl ash memory) is Blu-ray Disc content such as trailers and other 
special features downloaded from the BD-LIVE service or Blu-ray Discs.
*  You must have a minimum 1GB USB Memory device inserted in one of the USB\
 slots in order to download
content from BD-LIVE.
SYSTEM DEVICE MANAGEMENT
You can manage user data stored in BD data.With the unit in Stop mode, press the  MENU button.
Press the 
▲▼ buttons to select  Setup, then press the 
ENTER  or 
►...

57
ENG
●  SYSTEM UPGRADE
System upgrade
Samsung may offer upgrades to your Blu-ray Home Cinema's fi rmware in the future. To upgrade this fi rmware you must :
Go to samsung.com and refer to the ‘SUPPORT’ page to download the \
latest fi rmware.
You can use a CD-R or a USB fl ash drive to perform the fi rmware upgrade. For more information, see “Upgrade 
Manual” at the website mentioned above.
or
Connect the network (see pages 30~31) and follow the steps below.
FIRMWARE UPGRADE
With the unit in Stop...

System upgrade
58
FIRMWARE UPGRADE
To perform the system upgrade, press the ◄ ► buttons 
to select  Start and then press the  ENTER button.
The system update gets started.
If you select Cancel during the download process, you are 
prompted to confi rm your selection in a message box.
If you want to cancel the download, select  Yes and press 
the  ENTER  button. 
Verifi cation will proceed. When download is done, the 
fi rmware update process will begin automatically.
  When the installation is done, the...

59
ENG
●  SYSTEM UPGRADE
SYSTEM INFORMATION
When the fi rmware upgrade is done, check the fi rmware details by following the steps below. 
With the unit in Stop mode/No Disc mode, press the 
MENU button.
Press the 
▲▼ buttons to select  Setup, then press the 
ENTER  or 
► button.
Press the 
▲▼ buttons to select  System Setup, then 
press the  ENTER or
 ► button.
Press the 
▲▼ buttons to select  System Information , 
then press the  ENTER or
 ► button.
You can see detailed information about the current 
fi...

Watching a movie
60
USING THE DISPLAY FUNCTION
hZCV
 During playback, press the  INFO button on the remote 
control.
If the Blu-ray Disc has the PIP feature, press the  INFO 
button in the PIP section to display PIP-related 
information.
Press the 
▲▼ buttons to select the desired item.
Press the 
◄ ► buttons to make the desired setup change 
and then press the  ENTER button.
You may use the number buttons of the remote control 
to directly access a title, chapter or to start the playback 
from a...