Samsung HP-S4253, HP-S5053 Plasma Display Owners Instructions
Have a look at the manual Samsung HP-S4253, HP-S5053 Plasma Display Owners Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
81 4 Press the ▲or ▼ button to select “Delete” if you want to delete a channel, then press the ENTER button; the mark will disappear. To select the deselected channel, select “Add” to add a channel by pressing the ▲or ▼button. The mark will appear. • Red button (Channel Mode) : If you press the Red button repeatedly, the All Channel List, the Added Channel List or the Favorite Channel List is selected sequentially. • Yellow button : Press to delete all channels memorized. 5 Press the EXIT button to exit. Alternate method : Press the ADD/DEL button on the remote control. Press the CH and CH button to select the channel to be added or deleted, then press the ENTER button. Channel Manager /Added List Mode Delete AllMoveEnterReturn Air 2 Air 2 Air 3 Air 4 Air 5 Air 6 Air 7 Air 8 Air 9Air 10 Air 11 Air 12 Air 13 Air 14 Air 15 Air 16 Air 17Air 18Watch Add Delete Favorite Channel Manager /Added List Mode Delete AllMoveEnterReturn Air 2Air 2 Air 3 Air 4 Air 5 Air 6 Air 7 Air 8 Air 9Air 10 Air 11 Air 12 Air 13 Air 14 Air 15 Air 16 Air 17Air 18Watch Add Delete Favorite Add / Delete EnterExit Air 16 Not in memory Press ENTER to add the channel. Add Change BN68-00991B-01Eng(066~085) 2/17/06 2:00 PM Page 81
82 Default List mode Press the CH MGR button on the remote control and set the channel list format for the default channels. Select the mode you want among ALL, Added, and Favorite in Default List and press CH MGR button on the remote control. The channel you set from Default List mode displays on the screen. (Ex. if you select Favorite in Default List mode and press CH MGR button, Favorite Channel Manager displays on the screen.) 1 Press the MENU button. Press the ▲or ▼button to select “Channel”, then press the ENTER button. 2 Press the ▲or ▼button to select “Channel Manager”, then press the ENTER button. 3 Press the ▲or ▼button to select “Default List mode”, then press the ENTER button. Press the ▲or ▼button to select “All”, “Added”, or “Favorite”, then press the ENTER button. • All: All of the memorized channels • Added : Added channels • Favorite : Favorite channels 4 Press the CH MGR button on the remote control, then Default List mode will be displayed. 5 Press the EXIT button to exit. Antenna : Air√Auto Program√Channel Manager √Name√Fine Tune√Signal Strength√†More ChannelTV MoveEnterReturn All√Added√Favorite√Default List mode : All√ Channel ManagerTV MoveEnterReturn All Added Favorite Default List mode : All Channel ManagerTV MoveEnterReturn All Added Favorite Channel Manager /Added List Mode Delete AllMoveEnterPageExit Air 2Air 2 Air 3 Air 4 Air 5 Air 6 Air 7 Air 8 Air 9Air 10 Air 11 Air 12 Air 13 Air 14 Air 15 Air 16 Air 17Air 18 BN68-00991B-01Eng(066~085) 2/17/06 2:00 PM Page 82
83 Labeling the Channels Use this feature to assign an easy-to-remember label to any channel (i.e., “CBS”, “ESPN”, “PBS2”, “CNN1”, etc.) A label consists of five fields, where each field is a letter, a number or a blank. When the INFO button is pressed, the channel label will appear next to the channel number. 1 Press the MENU button. Press the ▲or ▼button to select “Channel”, then press the ENTER button. 2 Press the ▲or ▼button to select “Name”, then press the ENTER button. Press the ▲or ▼button to select the channel to be assigned a new name, then press the ENTER button. Press the ▲or ▼button to select a letter, a number or a blank (Results in this sequence: A...Z, 0...9, +, -, *, /, blank). Press the √button to switch to the next field, which will be selected. Select a second letter or digit by pressing the ▲or ▼button, as above. Repeat the process to select the last three digits. When you have finished, press the ENTER button to assign the new name. • To clear the entered channel name, move to “Clear” by using the œ/√button and press ENTER. 3 Press the EXIT button to exit. Note •The names of digital broadcasting channels are automatically assigned and thus cannot be assigned by users. NameTV MoveEnterReturn Antenna : Air√Auto Program√Channel Manager √Name√Fine Tune√Signal Strength√†More ChannelTV MoveEnterReturn Air 6 Air 7 Air 9 Air 11 Air 13 † Clear Clear Clear Clear Clear NameTV MoveAdjustReturn Clear Clear Clear Clear Clear … †Air 6 A Air 7 Air 9 Air 11 Air 13 † BN68-00991B-01Eng(066~085) 2/17/06 2:00 PM Page 83
84 Fine Tuning Analog Channels Use fine tuning to manually adjust a particular channel for optimal reception. 1 Press the MENU button. Press the ▲or ▼button to select “Channel”, then press the ENTER button. 2 Press the ▲or ▼button to select “Fine Tune”, then press the ENTER button. 3 Press the œ or√ button to adjust the fine tuning. To store the fine tuning setting in the TV’s memory, press the ENTER button. 4 To reset the fine tuning setting, press the ▼button to select “Reset”, then press the ENTER button. 5 Press the EXIT button to exit. Notes •Only analog TV channels can be fine tuned. •“ *” will appear next to the name of fine-tuned channels. Fine Tune Air 4 * Fine Tuned Reset AdjustSaveReturn 10 Fine Tune AIR 4 Reset MoveEnterReturn 0 Antenna : Air√Auto Program√Channel Manager √Name√Fine Tune√Signal Strength√†More ChannelTV MoveEnterReturn Fine Tune Air 4 Reset AdjustSaveReturn 0 BN68-00991B-01Eng(066~085) 2/17/06 2:00 PM Page 84
85 Checking the Digital-Signal Strength Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel. You can, however, adjust your antenna to improve the reception of available digital channels. 1 Press the MENU button. Press the ▲or ▼button to select “Channel”, then press the ENTER button. 2 Press the ▲or ▼button to select “Signal Strength”, then press the ENTER button. If the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase the signal strength. Continue to adjust the antenna until you find the best position with the strongest signal. 3 Press the EXIT button to exit. Signal StrengthTV Return Antenna : Air√Auto Program√Channel Manager √Name√Fine Tune√Signal Strength√†More ChannelTV MoveEnter Enter Return OK BN68-00991B-01Eng(066~085) 2/17/06 2:00 PM Page 85
86 LNA (Low Noise Amplifier) If the TV is operating in a weak-signal area, sometimes the LNA function can improve the reception (a low-noise preamplifier boosts the incoming signal). 1 Press the MENU button. Press the ▲or ▼button to select “Channel”, then press the ENTER button. 2 Press the ▲or ▼button to select “LNA”, then press the ENTER button. 3 Press the ▲or ▼button to select “On” or “Off”, then press the ENTER button. 4 Press the EXIT button to exit. Notes •LNA functions only when antenna is set to AIR or CABLE. (See “Selecting the Antenna” on page 76.) •If the picture is noisy with the LNA set to On, select Off. •The LNA setting must be made separately for each channel. ChannelTV MoveEnterReturn …More LNA :Off …More LNA :Off ChannelTV MoveEnterReturn Antenna : Air√Auto Program√Channel Manager √Name√Fine Tune√Signal Strength√†More ChannelTV MoveEnterReturn Off On Off On BN68-00991B-01Eng(086~117) 2/17/06 2:01 PM Page 86
PLASMA DISPLAY PANEL Connecting a PC and Operation Connecting a PC ..........................................................................88 Changing the Position of the Image ................................................92 Picture Quality Adjustment ............................................................93 Image Reset ................................................................................95 BN68-00991B-01Eng(086~117) 2/17/06 2:01 PM Page 87
88 Connecting a PC Connection to a Macintosh computer may require an adapter. Audio cable PC cable TV Rear Panel Connecting a PC (15p D-SUB) to the TV Connect a PC cable between the PC Output jack on the PC and the RGB input jack (PC IN) on the TV. Connect a Audio cable between the Audio jack on the PC and the Audio input jacks (PC AUDIO IN) on the TV. Notes •Please be sure to match the color coded input terminals and cable jacks. •A PC will not operate when connected to the TV with a HDMI/DVI cable. To watch the PC screen: 1. Turn on your TV. 2. Press the SOURCE button on the remote control or SOURCE button on the side panel to select “PC”. 3. Turn on your PC and check for PC system requirements. (Refer to pages 90 and 91 for PC system requirements.) 4. Adjust the PC screen. (Refer to pages 92 to 94.) 1 2 PC Power cord 2 1 BN68-00991B-01Eng(086~117) 2/17/06 2:01 PM Page 88
89 89 Setting up Your TV (Plug and Play) Our adoption of the new VESAPlug and Play solution eliminates complicated and time consuming setup. It allows you to install your monitor in a Plug and Play compatible system, without the usual setup hassles and confusion. Your PC system can easily identify and configure itself for use with your TV. This TV automatically tells the PC system its Extended Display Identification data (EDID) using Display Data Channel (DDC) protocols. BN68-00991B-01Eng(086~117) 2/17/06 2:01 PM Page 89
90 How to Set up Your PC Software (Windows only) The Windows display-settings for a typical computer are shown below. But the actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. But even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.) 1.Right click the mouse on the Windows Desktop, then click on Properties. The Display Dialog-Box will be displayed. 2.Click on Settings, then set the Display Mode by referencing the Display Modes Table. You do not need to change the Colors settings. 3.Click on Advanced. A new settings dialog box will be displayed. 4.Click on the Monitor tab, then set the Screen Refresh Rate with reference to the Display Modes Table (see page 91). Set the Vertical Frequency and Horizontal Frequency individually if you can do so instead of setting the Screen Refresh Rate. 5.Press the OK button, close the window, then press the OK button on the Display Registration Information window. Automatic re-booting may commence at this moment. 6.Shutdown the PC, and connect it to your TV. (See page 88) • The actual screens on your PC may look different, depending on your particular version of Windows and the type of your PC. • When you use your TV as a PC monitor, it supports Colors up to 32 bits. • The display on the TV may look different depending on your particular version of Windows or the PC manufacturer. • When connecting a PC you must set it to the display settings that are supported by the TV. Otherwise, the message “Out of input range” will be displayed. Continued... 2 3 4 5 BN68-00991B-01Eng(086~117) 2/17/06 2:01 PM Page 90