Samsung HP-S4253, HP-S5053 Plasma Display Owners Instructions

							PLASMA DISPLAY PANEL
Operation
Turning the TV On and Off ............................................................32
Viewing the Menus and Displays ..................................................36
Memorizing the Channels ............................................................37
Setting Up Your Remote Control ....................................................41
Viewing an External Signal Source ................................................48
BN68-00991B-01Eng(002~031)  2/17/06  1:56 PM  Page 31 
						

							Turning the TV On and Off
32
Turning the TV On and Off
Press the POWER ( ) button on the remote control.
The TV will be turned on and you will be able to use its features.
You can also use the Power button on the front of the TV.
Note
•If your TV isn’t turned on when the POWER button is pressed:
Check if the TV mode has been chosen
. 
Plug & Play Feature
When the TV is initially powered On, basic customer settings proceed automatically and subsequently:
Setting the language, checking the antenna input, memorizing the channels, and setting the time.
Note
•The Plug & Play function operates after plugging in the TV for the first time.
1
Press the POWER button on the remote control.
The message “Menu language, Channels and Time 
will be set.” is displayed.
Press the ENTER button, then “Select the language of 
the OSD.” menu is automatically displayed.
2
Press the ENTER button to enter the language.
Press the ▲or ▼button to select language, then 
the ENTER button. “Select the antennas to 
memorize.” menu is automatically displayed.
Continued...
Menu language, Channels 
and Time will be set.i
Start
Select the language of the OSD.
Menu Language          :English
Plug & Play
EnterSkip
English
Spanish
French
Move
BN68-00991B-01Eng(032~051)  2/17/06  1:57 PM  Page 32 
						

							3
Press the ▲or ▼button to memorize the channels of
the selected connection. 
Press the ENTER button to select “Start”.
Notes
•  If the antenna is connected to ANT 1 IN (CABLE),
select “Cable” and if it is connected to 
ANT 2 IN (AIR), select “Air”.
•If both ANT 1 IN and ANT 2 IN are connected, 
select the “Air + Cable”.
4
Select the correct signal source (STD, HRC, and 
IRC) by pressing the ▲or ▼button, then press 
the ENTER button
.
Note
•
STD, HRC, and IRC identify various types of cable
TV systems. Contact your local cable company to
identify the type of cable system that exists in your
particular area. At this point the signal source has
been selected. Proceed to “Storing Channels in
Memory” on page 38.
5
The TV will begin memorizing all of the available
channels. 
After all the available channels are stored, the Auto 
program menu reappears. 
Press the ENTER button at any time to interrupt the 
memorization process.
Press the ENTER button, then the menu to set the 
clock mode is automatically displayed.
6
Press the ENTER button to select “Clock Mode”.
Press the 
▲or ▼button to select “Auto” or “Manual”, 
then press the ENTER button.
Continued...
33
Select the antennas to memorize.
Air               
Cable
Air + Cable
Plug & Play
EnterSkipMove
StartStartStart
Select the cable system.
STD
HRC  
IRC
Plug & Play
EnterSkipMove
Plug & Play
EnterSkip
Auto Program in progress.
Cable   Channel   67
Stop
Plug & Play
EnterSkip
Auto Program is completed. 
14 Channels were memorized.
Air   : 9 , Cable  : 5.
OK
Select the clock mode.
Clock Mode          :English
Plug & Play
EnterSkip
Manual
Auto
Move
BN68-00991B-01Eng(032~051)  2/17/06  1:57 PM  Page 33 
						

							34
Option 1: Setting the Clock Automatically
If you set “Clock Mode” to “Auto” in step 6, follow the instructions below.
7
Press the ENTER button to select “DST”(Daylight Savings
Time).
Press the ▲or ▼button to select “No” or “Yes”, then 
press the ENTER button. 
“Select the time zone in which you live” menu is 
automatically displayed.
8
Press the ▲or ▼button to highlight the time zone 
for your local area (and to move the highlight to the 
appropriate time zone on the map of the United States).
Press the ENTER button. 
If you have received a digital signal, the time will 
be set automatically. If not, see page 99 to set the 
clock.
9
The message “Enjoy your watching.” is displayed. 
When you have finished, press the ENTER button.
Option 2: Setting the Clock Manually
If you set “Clock Mode” to “Manual” in step 6, follow the instructions below.
7
Press the œor √button to move to “Month”, “Day”,
“Year”, “Hour”, “Minute”, or “am/pm”. 
Set the clock you want by pressing the ▲or ▼button, 
then press the ENTER button.
•You can set the month, day, year, hour and minute 
directly by pressing the number buttons on the remote 
control.
8
The message “Enjoy your watching.” is displayed. 
When you have finished, press the ENTER button.
Enjoy your watching.i
OK
Enjoy your watching.i
OK
Set to daylight savings time.
Daylight Savings Time          :English
Plug & Play
EnterSkip
No
Ye s
Move
Clock Set
Select the time zone in which you live.
Plug & Play
NewfoundlandAtlantic
Eastern
Central
Mountain
Pacific
Alaska
Hawaii
EnterSkipMove
EnterSkipMove
Set current date and time.
Month       Day         Year
Hour   Minute    am/pm…
†---- ----
-- -- --
BN68-00991B-01Eng(032~051)  2/17/06  1:57 PM  Page 34 
						

							35
To reset this feature...
1
Press the MENU button. Press the ▲or ▼button to select
“Setup”, then press the ENTER button.
2
Press the ENTER button to select “Plug & Play”.
3
For further details on setting up options, refer to the 
previous page.
Note
•Plug and Play can only be accessed in the TV mode.
Plug & Play√Language : English√Time√Game Mode : Off√V-Chip√Caption√†More
SetupTV
MoveEnterReturn
Menu language, Channels 
and Time will be set.i
Start
BN68-00991B-01Eng(032~051)  2/17/06  1:57 PM  Page 35 
						

							36
Viewing the Menus and Displays
Your TV has a simple, easy-to-use menu system that appears on the TV screen. 
This system makes it convenient and fast to use features on the TV. 
Your TV also lets you display the status of many of your TV’s features.
Viewing the Menus
1
With the power on, press the MENU button on the
remote control. The main menu appears on the 
screen. The Input menu is selected.
2
Press the ▲or ▼button to move to items in the menu.
Press the œ/√/ENTER buttons to display, change, 
or use the selected items.
Press the ENTER button to enter items in the menu.
On screen menus disappear from the screen 
automatically after about one minute or you can press 
the EXIT button on your remote control to exit the menu.
Displaying Status Information
Press the INFO button on the remote control.
The TV will display the Picture Mode, Sound Mode, MTS, 
and Current Time. 
Note•The INFO window automatically disappears after a few
seconds. Press the INFO button once to manually close the
window.
Source List : TV√Edit Name√
InputTV
MoveEnterReturn
Air 28
Picture Mode : Dynamic
Sound Mode : Custom
MTS : Stereo
12 : 00 am Mono
BN68-00991B-01Eng(032~051)  2/17/06  1:57 PM  Page 36 
						

							37
Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable
channels. After the available channels are memorized, use the CH and CH buttons to scan
through the channels. This eliminates the need to change channels by entering the channel digits.
There are three steps for memorizing channels: selecting a broadcast source, memorizing the
channels (automatic) and adding and deleting channels (manual).
Selecting a broadcast source
Before your television can begin memorizing the available channels, you must specify the type of signal
source that is connected to the TV (i.e., an antenna or a cable system).
1
Press the MENU button. Press the ▲or ▼button to select
“Channel”, then press the ENTER button.
2
Press the ▲or ▼button to select “Auto Program”, then
press the ENTER button.
3
Press the ▲or ▼button to select the antenna connection,
then press the ENTER button.
Notes
•Air  : “Air” antenna signal.
•Cable  : “Cable” antenna signal.
•Air + Cable  : “Air” and “Cable” antenna signals.
•If the antenna is connected to ANT 1 IN (CABLE),
select “Cable” and if it is connected to 
ANT 2 IN (AIR), select “Air”.
•If both ANT 1 IN and ANT 2 IN are connected, 
select the “Air + Cable”.
Antenna : Air√Auto Program√Channel Manager   √Name√Fine Tune√Signal Strength√†More
ChannelTV
MoveEnterReturn
Antenna : Air√Auto Program√Channel Manager   √Name√Fine Tune√Signal Strength√†More
ChannelTV
MoveEnterReturn
Auto ProgramTV
MoveEnterReturn
Select the antennas to memorize.
Air               
Cable
Air + Cable
StartStartStart
Auto ProgramTV
MoveEnterReturn
Select the antennas to memorize.
Air               
Cable
Air + Cable
StartStartStart
➤ ➤Quick way to select Auto Program: Just press “AUTO PROG.” button on the
remote control.
BN68-00991B-01Eng(032~051)  2/17/06  1:57 PM  Page 37 
						

							38
Storing Channels in Memory 
4
Select the correct signal source (STD, HRC, and 
IRC) by pressing the ▲or ▼button, then press 
the ENTER button
.
Note
•
STD, HRC, and IRC identify various types of cable
TV systems. Contact your local cable company to
identify the type of cable system that exists in your
particular area. At this point the signal source has
been selected.
5
The TV begins memorizing all available stations. 
Press the ENTER button at any time to interrupt the 
memorization process.
Press the EXIT button to exit.
Note
•The TV must be connected to an antenna in 
order to receive digital TV signals.
Even if a particular channel is deleted from the 
memory, you can always tune to that channel 
directly by using the number buttons on the 
remote control.
Notes
•All available DTV and analog channels are automatically stored in memory.
•It takes approximately 3 to 10 minutes to memorize channels.
Auto Program
EnterReturn
Auto Program in progress.
Cable   Channel   67
Stop
Select the cable system.
STD
HRC  
IRC
Auto ProgramTV
MoveEnterReturn
BN68-00991B-01Eng(032~051)  2/17/06  1:57 PM  Page 38 
						

							39
Changing Channels
Using the Channel Buttons
Press the CH or CH button to change channels.
When you press the CH or CH button, the TV changes channels 
in sequence. You will see all the channels that the TV has memorized. 
(The TV must have memorized at least three channels.) 
You will not see channels that were either erased or not memorized.
Directly Accessing Channels
Press the number buttons to go directly to a channel. For example, to select
channel 27, press “2” then “7”.  
When you use the number buttons, you can directly select channels that 
were either erased or not memorized. To change to single-digit channels
(0~9) faster, press “0” before the single digit. (For channel “4” press “0”,
then “4”.) 
Note•For quick channel change, press the number buttons and, then press
ENTER button.
Using the PRE-CH button to select the previous channel
Press the PRE-CH button. The TV will switch to the last channel viewed.
To quickly switch between two channels that are far apart, tune to one
channel, then use the number button to select the second channel. 
Then, use the PRE-CH button to quickly alternate between them.
Adjusting the Volume
Using the Volume Buttons
Press the VOL or VOL button to increase or decrease the volume. 
Using Mute
Using the MUTE Button
At any time, you can temporarily cut off the sound using the MUTE button.
1
Press the MUTE button and the sound cuts off. The word “Mute” will
appear in the lower-left corner of the screen.
2To turn mute off, press the MUTE button again, or simply press the  
VOL or VOL button.
Mute
BN68-00991B-01Eng(032~051)  2/17/06  1:57 PM  Page 39 
						

							40
Using the “-”Button
The “-” button is used to select stations that broadcast both a digital and analog signal.
For example, for Channel 7
-1 (digital), press “7”, then “-”, 
then “1”.
For channel 7
-2 (analog), press “7”, then “-”, then “2”.
Notes 
•HD indicates the TV is receiving a Digital High Definition signal. 
SD indicates the TV is receiving a Standard Definition signal. 
•For quick channel change, press the number buttons, then press the ENTER button.
Freezing the Current Picture
Using the STILL Button
You can freeze the picture when watching a television program simply
by pressing the STILL button. To return to normal viewing, press it again.
Note•This function will automatically cancel five minutes later.
DTV Cable
7 - 1
KYW-HD
HD
DTV Cable
7 - 2
R
SD
Multi
BN68-00991B-01Eng(032~051)  2/17/06  1:57 PM  Page 40