Samsung HP-S4253, HP-S5053 Plasma Display Owners Instructions

							11
Remote Control Buttons
ŒPOWER buttonTurns the TV on and off.
´Number buttons
ˇ
-buttonPress to select additional channels (digital and analog) being broadcast
by the same station. For example, to select channel “54-3”, press “54”,
then press “
-” and “3”.
¨ANTENNA buttonPress to select “Air” or “Cable”.
ˆCH MGR buttonUsed to displays Channel Lists on the screen.
ØVCR, DVD control buttonsControls VCR tape or DVD disc functions: Rewind, Stop, Play/Pause, 
and Fast Forward.
∏VOL (Volume) buttonsUse it to adjust volume.
”MUTE buttonPress to mute the TV sound.
’MENU buttonDisplays the main on-screen menu.
˝ENTER buttonConfirms a selection. 
ÔPIP buttonActivates picture in picture. (Refer to page 58)
INFO buttonPress to display information on the TV screen.
ÒMode (TV/DVD/STB/CABLE/VCR) buttonSelects a target device to be controlled by the Samsung remote control
(i.e., TV, DVD, STB, CABLE, or VCR).    
ÚSOURCE buttonPress to display all of the available video sources (TV, AV1, AV2, S-Video1,
S-Video2, Component1, Component2, PC, HDMI1, and HDMI2).
ÆPRE-CH buttonTunes to the previous channel.
ıE.SAVING buttonPress to adjust screen brightness according to surrounding environment.
(Refer to page 113)
˜FAV.CH buttonPress to switch between your favorite channels.
¯CH (Channel) buttonsUse it to switch channels.
˘EXIT button Press to exit the menu.  
¿Up/Down/Left/Right buttonsControl the cursor in the menu.   
¸SLEEP buttonPress to select a preset time interval for automatic shut off. (Refer to page 101)
Continued...
Remote Control
BN68-00991B-01Eng(002~031)  2/17/06  1:56 PM  Page 11 
						

							˛P.MODE buttonAdjust the TV picture by selecting one of the preset factory settings (or
select your personal, customized picture settings). (Refer to page 53)
◊S.MODE buttonSelect Sound effect. (Refer to page 67)
±MTS buttonPress to choose stereo, mono or Separate Audio Program 
(SAP broadcast).
≠SRS buttonActivates TruSurround. (Refer to page 68)
–AUTO PROG. buttonPress to display the memorized channels menu. (Refer to page 37)
—ADD/DEL buttonPress to add or erase channels in the TV’s memory. (Refer to page 81)
÷STILL buttonPress to pause the current screen.
®P.SIZE buttonSelect Picture size. (Refer to page 56)
∑PIP control buttonsSWAP: Interchange the main and sub picture.
CH,: Displays the available channels in sequence. 
(These buttons change channels in the PIP window only.)
µCAPTION buttonControls the caption decoder. 
¥RESET button If your remote control is not functioning properly, take out the batteries
and press the reset button for about 2~3 seconds. 
Re-insert the batteries and try using the remote control again. 
≥SET buttonUsed during set up of this Samsung remote control, so that it will work
compatibly with other devices (VCR, Cable Box and DVD).
12
Installing the Batteries in Your Remote Control
1Lift the cover at the back of
the remote control upward
as shown in the figure.
3Close the cover as shown
in the figure.2Install two AAA size batteries.
Make sure to match the “+” and
“
-” ends of the batteries with the
diagram inside the compartment.
•Do not mix battery types, i.e.  
alkaline and manganese.
Remote Control Operation Range
You can use your remote control within a distance of 23 feet and an angle of 30 degrees
from the left and right sides of the TV’s remote control receiver.
Note
•This is a special remote control for the visually impaired, and has Braille points on the Power,
Channel and Volume buttons.
BN68-00991B-01Eng(002~031)  2/17/06  1:56 PM  Page 12 
						

							13
Wall Installation Instructions
Refer to the installation guide supplied with your wall bracket.
1
Contact a professional installation service to install the wall bracket.
2
Samsung Electronics is not responsible for any damages to the product or harm to
customers when the installation is done by the customer.
3
This product is for installing on cement walls. The product may not stay in place when
installed on plaster or wood.
4
Connect all external devices prior to installing the wall bracket.
5
The package contents and parts supplied for the wall mount are subject to change without
prior notice.
Installation Notes
Parts (Wall attachment panel is sold separately. Check with your dealer.)
Please use only the parts and components provided for wall mount installation.
Plastic Hanger : 4
Screw : 4
1Left : 1 Right : 1
Wall Mount Bracket ASSY-HINGE Accessories
BN68-00991B-01Eng(002~031)  2/17/06  1:56 PM  Page 13 
						

							14
1 
The wall mount bracket is delivered separately. Please tighten the captive screw in the
direction of the arrow after assembling the bracket.
Install the Wall Mount Bracket after the screws are securely inserted into the wall.
How to assemble the Wall Mount Bracket
1 
Remove the screws from the back of the PDP.
2 
Use the screw and assemble the plastic hanger. (Please refer to the following picture.)
Fixing the TV panel to the wall attachment panel bracket
The shape of the product may vary depending on the model. (The assemblies of the plastic
hanger and the screw are the same)
• Please ask the installers to install the wall mount bracket.
• Please be sure to check if the plastic hanger is completely secured on both the left and 
right side after hanging the SET on the wall mount bracket.
• Please avoid catching your fingers while installing and adjusting the angle.
• Please tightly secure the wall mount bracket to the wall to avoid injury from a falling SET.
Captive Screws
Wall Mount Bracket
ASSY-HINGE
(RIGHT) Separate ASSY-HINGE
into Left and Right. ASSY-HINGE
(LEFT)
BN68-00991B-01Eng(002~031)  2/17/06  1:56 PM  Page 14 
						

							15
3
Tighten the screws of the plastic hanger
(shown in picture 2) to the back side of 
the PDP.
4
Remove the Safety Pins. Fasten the 4
plastic latches assembled at step (#) on
the back side of the PDP using the guide
holes of the wall mount, push (!) and 
hook (@) down to secure the PDP on 
the wall mount as illustrated. Secure the 
PDP by inserting the Safety Pins, not to 
fall from the wall mount.
PDP
Wall Bracket Wall
How to Adjust Mounting Angle
Note  Note : Please secure the mounting bracket on the wall surface after setting its angle at 0°
Hold onto the middle of the PDP
to adjust the angle (not the sides
of the PDP).1. Secure the SET to the wall mount bracket.
(Please refer to the following instructions.)
2. Set the angle by pulling the upper end of the SET
attached to bracket in the direction of the arrow. 
(Refer to the illustration on the right.)
3. The angle can be adjusted from 0° to 15° by ±2°.
BN68-00991B-01Eng(002~031)  2/17/06  1:56 PM  Page 15 
						

							16
Connecting External Devices to the PDP
Note  Note :  To connect external devices such as a DVD or a Home Theater System to the PDP, 
please refer to following instructions:
1. Be sure to remove the safety pins underneath 
the PDP.
Note  Note : If the safety pins are not removed, 
the angle cannot be adjusted. 
Any attempt to do so may cause 
damage to the PDP.
2. Hold onto the bottom of the PDP and pull
forward fully as directed by the arrow as
illustrated) to adjust the angle. (0°~20° by 2°)
Insert the Safety Pins to the front guide holes on
both sides as illustrated in figure @.
Note  Note : Viewing the PDP after connecting the 
external devices Remove the Safety 
Pins to adjust the angle to 0°
, and 
then secure the Safety Pins again.
• For safety, be sure to secure the PDP using 
the safety pins. If the safety pins are not 
used, the PDP may fall, causing serious injury.
BN68-00991B-01Eng(002~031)  2/17/06  1:56 PM  Page 16 
						

							17
How to assemble the Stand-Base
➤ ➤Two or more people should carry the TV. Never lay the TV on the floor because of possible damage to the screen. 
Always store the TV upright.
1
Using the 4 screws for securing the stand pegs and the monitor, firmly attach the monitor
to the stand pegs. (The exterior of the set may be different than the picture.) 
Warning
Firmly secure the stand to
the TV before moving it, 
as the stand may fall and 
could cause serious injury.
BN68-00991B-01Eng(002~031)  2/17/06  1:56 PM  Page 17 
						

							BN68-00991B-01Eng(002~031)  2/17/06  1:56 PM  Page 18 
						

							PLASMA DISPLAY PANEL
Connections
Connecting VHF and UHF Antennas ..............................................20
Connecting Cable TV....................................................................21
Connecting a VCR........................................................................23
Connecting a Camcorder ..............................................................24
Connecting a DVD Player (480i, 480p) ..........................................25
Connecting a DTV Receiver (480p, 720p, 1080i) ..........................26
Connecting to HDMI (High Definition Multimedia Interface) 
(480p, 720p, 1080i) ..................................................................27
Connecting a Digital TV Set-Top Box (480p, 720p, 1080i) ..............28
Connecting a Digital Audio System ................................................29
Connecting to an Analog Amplifier ................................................30
BN68-00991B-01Eng(002~031)  2/17/06  1:56 PM  Page 19 
						

							Connecting VHF and UHF Antennas
20
Antennas with 75-ohm Round Leads
If your antenna looks like this: it has 75-ohm round leads.  
1
Plug the antenna lead into the ANT 2 IN (AIR) on the TV.
Use an antenna cable. (Sold Separately)
BN68-00991B-01Eng(002~031)  2/17/06  1:56 PM  Page 20