Samsung Hp R5012 Plasma Display Owners Instructions

							81
Fine Tuning Analog Channels
Use fine tuning to manually adjust a particular channel for optimal reception.
1
Press the MENU button. Press the ▲or ▼button to select
“Channel”, then press the ENTER button.
2
Press the ▲or ▼button to select “Fine Tune”, then press
the ENTER button.
3
Press the œ or√ button to adjust the fine tuning. 
To store the fine tuning setting in the TV’s memory, press 
the ENTER button. 
4
To reset the fine tuning setting, press the ▼button 
to select “Reset”, then press the ENTER button.
5 
Press the MENU button to exit.
Notes
•Only analog TV channels can be fine tuned.
•“
*” will appear next to the name of fine-tuned channels.
Fine Tune
AIR  4   Fine Tuned 
Reset
AdjustSaveReturn
10
Fine Tune
AIR  4                                 
Reset
MoveEnterReturn
0
Antenna : Air√Auto Program√Add / Delete   √Favorite Channels√Name√Fine Tune√
†More
ChannelTV
MoveEnterReturn
Fine Tune
AIR  4
Reset
AdjustSaveReturn
0
BN68-00835E-00Eng_(064~083)  5/30/05  5:25 PM  Page 81 
						

							82
Checking the Digital-Signal Strength
Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV)
channels have either perfect reception quality or you will not receive them at all. So, unlike analog
channels, you cannot fine tune a digital channel. You can, however, adjust your antenna to improve
the reception of available digital channels.
1
Press the MENU button.
Press the ▲or ▼button to select “Channel”, then press 
the ENTER button. 
2
Press the ▲or ▼button to select “Signal Strength”, 
then press the ENTER button.
If the signal strength meter indicates that the signal 
is weak, physically adjust your antenna to increase 
the signal strength.
Continue to adjust the antenna until you find the
best position with the strongest signal.
3
Press the MENU button to exit.
Signal StrengthTV
Return
Antenna : Air√Auto Program√Add / Delete   √Favorite Channels√Name√Fine Tune√
†More
ChannelTV
MoveEnterReturn
BN68-00835E-00Eng_(064~083)  5/30/05  5:25 PM  Page 82 
						

							83
LNA (Low Noise Amplifier)
If the TV is operating in a weak-signal area, sometimes the LNA function can improve the reception
(a low-noise preamplifier boosts the incoming signal).
1
Press the MENU button. Press the ▲or ▼button to select
“Channel”, then press the ENTER button.
2
Press the ▲or ▼button to select “LNA”, then press the
ENTER button.
3
Press the ▲or ▼button to select “On” or “Off”, then
press the ENTER button.
4 
Press the MENU button to exit.
Notes
•LNA functions only when antenna is set to AIR and the settings will be stored separately in 
each channel. (See “Selecting the Antenna” on page 76.)
•If the picture is noisy with the LNA set to On, select Off.
•The LNA setting must be made separately for each channel.
ChannelTV
MoveEnterReturn
…More
Channel List
Signal Strength
LNA :Off
…More
Channel List
Signal Strength
LNA :Off
ChannelTV
MoveEnterReturn
Antenna : Air√Auto Program√Add / Delete   √Favorite Channels√Name√Fine Tune√
†More
ChannelTV
MoveEnterReturn
Off
On
Off
On
BN68-00835E-00Eng_(064~083)  5/30/05  5:25 PM  Page 83 
						

							BN68-00835E-00Eng_(084~113)  5/30/05  5:26 PM  Page 84 
						

							PLASMA DISPLAY PANEL
Connecting a PC and Operation
Connecting a PC ..........................................................................86
Changing the Position of the Image ................................................90
Picture Quality Adjustment ............................................................91
Image Reset ................................................................................94
BN68-00835E-00Eng_(084~113)  5/30/05  5:26 PM  Page 85 
						

							86
Connecting a PC
Connection to a Macintosh computer may require an adapter.
Audio cable
PC cable
TV Rear Panel
Connecting a PC (15p D-SUB) to the TV
Connect a PC cable between the PC Output jack on the PC and the RGB input jack (PC IN)
on the TV.
Connect a Audio cable between the Audio jack on the PC and the Audio input jacks (PC AUDIO IN)
on the TV.
Notes
•Please be sure to match the color coded input terminals and cable jacks.
•A PC will not operate when connected with a HDMI/DVI cable.
To watch the PC screen:
1. Turn on your TV.
2. Press the SOURCE button on the remote control or SOURCE button on the front panel
to select “PC”.
3. Turn on your PC and check for PC system requirements. (Refer to pages 88 and 89 for PC 
system requirements.)
4. Adjust the PC screen. (Refer to pages 90 and 92.)
1
2
PC
Power cord
BN68-00835E-00Eng_(084~113)  5/30/05  5:26 PM  Page 86 
						

							87 87
Setting up Your TV (Plug and Play)
Our adoption of the new VESAPlug and Play solution eliminates complicated and time consuming
setup. It allows you to install your monitor in a Plug and Play compatible system, without the usual setup
hassles and confusion. Your PC system can easily identify and configure itself for use with your TV. 
This TV automatically tells the PC system its Extended Display Identification data (EDID) using Display
Data Channel (DDC) protocols.  
BN68-00835E-00Eng_(084~113)  5/30/05  5:26 PM  Page 87 
						

							88
How to Set up Your PC Software (Windows only)
The Windows display-settings for a typical computer are shown below. But the actual screens on your
PC will probably be different, depending upon your particular version of Windows and your particular
video card. But even if your actual screens look different, the same, basic set-up information will apply
in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
1.Right click the mouse on the Windows
Desktop, then click on Properties. 
The Display Dialog-Box will be displayed.
2.Click on Settings, then set the Display Mode
with reference to the Display Modes Table.
You do not need to change the Colors settings.
3.Click on Advanced. A new settings dialog box
will be displayed.
4.Click on the Monitor tab, then set the 
Screen Refresh Rate with reference to the
Display Modes Table. Set the Vertical
Frequency and Horizontal Frequency
individually if you can do so instead of setting
the Screen Refresh Rate.
5.Press the OK button, close the window, then
press the OK button on the Display Registration
Information window. Automatic re-booting may
commence at this moment.
6.Shutdown the PC, and connect it to your TV.
(See page 86)
• The actual screens on your PC may look 
different, depending on your particular 
version of Windows and the type of your PC.
• When you use your TV as a PC monitor, it
supports Colors up to 32 bits.
• In this case, the display on the TV may look 
different depending on your particular version 
of Windows or the PC manufacturer.
• When connecting a PC (including the DVI 
connection), you must set it to the display 
settings that are supported by the TV. 
Otherwise, the message Out of input 
range will be displayed.  
Continued...
2
3
4
5
BN68-00835E-00Eng_(084~113)  5/30/05  5:26 PM  Page 88 
						

							89
Note
Both screen position and size will vary, depending on the type of PC monitor and its resolution. 
The table below shows all of the display modes that are supported:
•The interlace mode is not supported.
•The TV operates abnormally if a non-standard video format is selected.
•The table above conforms to IBM/VESA regulations and is based on using the Analog Input.
•A “
✔” mark means that this mode can be supported.
Notes
•The PC text quality of HP-R4262 is optimum in XGA mode (1024 x 768@60Hz).
•The PC text quality of HP-R5012 is optimum in WXGA mode (1360 x 768@60Hz).
•When this TV is used as a PC display, 32-bit color is supported.
•Depending on the manufacturer, your PC display screen might appear different.
(and depending on your particular version of Windows.) 
Check your PC instruction book for information about connecting your PC to a TV.
•If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 48.4KHz (horizontal).
•In some cases, abnormal signals (such as stripes) might appear on the TV screen when the PC power 
is turned off (or if the PC is disconnected). If so, press the SOURCE button on the remote control or 
SOURCE button on the front panel to enter the VIDEO mode. Also, make sure that the PC is connected.
•Connect only a PC monitor to the monitor output port while viewing the PC screen. 
(Otherwise, random signals might appear).
Video Signal
IBM PC / AT
CompatibleResolution
(Dot X Line)Vertical
Frequency (Hz)
640 X 350
720 X 400
640 X 480
800 X 600
1024 X 768
1280 X 720
1360 X 76870.086
70.087
59.940
70.000
72.809
75.000
56.250
60.317
70.000
72.188
75.000
60.004
70.069
72.000
75.029
59.855
60.015Horizontal
Frequency (KHz)
31.469
31.469
31.469
35.000
37.861
37.500
35.156
37.879
43.750
48.077
46.875
48.363
56.476
57.672
60.023
44.772
47.712Vertical
Polarity
P
N
N
N/P
N
N
N/P
P
N/P
P
P
N
N
N/P
P
P
PHorizontal
PolarityHP-R5012 HP-R4262
N
P
N
N/P
N
N
N/P
P
N/P
P
P
N
N
N/P
P
N
P
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
BN68-00835E-00Eng_(084~113)  5/30/05  5:26 PM  Page 89 
						

							90
After connecting the TV to your PC, adjust the position of the screen if it is not well-aligned.
Preset: 
•  Press the SOURCE button to select “PC.”
1
Press the MENU button. Press the ▲or ▼button to select
“Setup”, then press the ENTER button. 
2
Press the ▲or ▼button to select “PC”, then press the
ENTER button. 
3
Press the ▲or ▼button to select “Position”, then press
the ENTER button.
4 
Adjust the position of screen by pressing the 
▲/▼/œ/√button.
5 
Press the MENU button to exit.
Changing the Position of the Image
Plug & Play√Language : English√Time√V-Chip√Caption√Menu Transparency : Medium√
†More
SetupTV
MoveEnterReturn
Image Lock√Position√Auto Adjustment
Image Reset
PCTV
MoveEnterReturn
PositionTV
MoveEnterReturn
PositionTV
MoveEnterReturn
BN68-00835E-00Eng_(084~113)  5/30/05  5:26 PM  Page 90