Samsung Hp R5012 Plasma Display Owners Instructions

							131
Viewing Information about a Single Channel
1
Press the MENU button.
Press the ▲or ▼button to select “Guide”, then 
press the ENTER button.
2
Press the ENTER button to select “Mini Guide”.
Press the ▲or ▼buttons to view information about 
one channel by time.
You can switch between Full Guide mode and Mini 
Guide mode by pressing the Red button repeatedly. 
Select the program you want by pressing the ▲or 
▼buttons and press the INFO button on the remote 
control.
• ENTER button : Press to watch the current program 
or to add the program to remind list.
• Red button  : Press to switch to the program 
guide for all channels. 
Press again to switch to the program 
information for the selected channel.
• Blue button : Press to exit.
• INFO button : Press to view detailed information 
for the selected digital program. 
3
Press the Blue button or EXIT button to exit.
Notes
•You can also view information about a single channel by pressing the GUIDE button on the remote
control. (The EPG should be pre-set in Mini Guide mode.)
•Press the INFO button on the remote control to view the program information for the current channel.
Mini Guide
3
Program 1
Program 2
Program 3
Program 4
Program 5
Program 6
5:00 pm
7:30 pm
8:00 pm
9:30 pm
10:00 pm
11:30 pm
Prog InfoINFOExit Full Guide
4:30 pm  Fri May 31
Mini Guide√Full Guide√Remind List√Default Guide : Mini Guide√
GuideTV
MoveEnterReturn
Watch
BN68-00835E-00Eng_(130~143)  5/30/05  5:30 PM  Page 131 
						

							Viewing Information about Channels
Displays the program time and content for all channels.
This function is available only when the program is digital.
1
Press the MENU button.
Press the ▲or ▼button to select “Guide”, then 
press the ENTER button.
2
Press the ▲or ▼button to select “Full Guide”, then press
the ENTER button.
3
Press the Green button to activate “-2 Hours” and the
Yellow button to activate “+2 Hours”.
• INFO button : Displays detailed information for 
the selected digital program.
• ▲/▼button  : Displays program information for 
each channel, based on the time. 
Select your desired program using 
the ▲/▼button, and then press the 
INFO button to view the program 
information for the selected program. 
• Red button  : Each press switches between program 
information for one channel and all 
channels.
• Green button  : Press to view the program information 
from two hours ago.
• Yellow button : Press to view the program information 
for two hours from now.
• Blue button : Press to exit.
• ENTER button  : Press to watch the current program 
or to add the program to remind list.
4
You may now:
• Jump to a channel directly : Use the ▲, ▼, œ, or √button to highlight the program 
and press the ENTER button.
• Obtain additional program details : Highlight the title of a program using the ▲, ▼, œ, or √
buttons and press the INFO button.
• Exit from the Program Guide and return to normal viewing mode : 
Press the Blue button or the EXIT button.
Notes
•The current time displayed on the program information is subject to the time information sent from 
the broadcasting station, so it may differ from the actual time.
•Press the GUIDE button on the remote control to view the program information for all channels. 
However, this function is available only when the default program guide setting is set to “Full Guid
e”.
132
Mini Guide√Full Guide√Remind List√Default Guide : Mini Guide√
GuideTV
MoveEnterReturn
BN68-00835E-00Eng_(130~143)  5/30/05  5:30 PM  Page 132 
						

							133
Viewing the Remind List
If you have made a scheduled viewing list of programs you would like to see, the channel will be 
automatically switched to the scheduled program at the scheduled time even if you are watching 
another program.
1
Press the MENU button.
Press the ▲or ▼button to select “Guide”, then 
press the ENTER button.
2
Press the ENTER button to select “Full Guide”.
Press the ▲or ▼button to select programs you would
like to see, then press the enter button.
The symbol “
✔” will be displayed.
Each press of the enter button will switch between 
“Remind” and “Del Remind”(Del=Delete). 
3
Press the MENU button to exit.
Note
•Up to 8 programs can be reminded.
Remind List
Mini Guide√Full Guide√Remind List√Default Guide : Mini Guide√
GuideTV
MoveEnterReturn
Mini Guide
3
Program 1
Program 2
Program 3
Program 4
Program 5
Program 6
5:00 pm
7:30 pm
8:00 pm
9:30 pm
10:00 pm
11:30 pm
Prog InfoINFOExit Full Guide
4:30 pm  Fri May 31
Remind List
Watch
BN68-00835E-00Eng_(130~143)  5/30/05  5:30 PM  Page 133 
						

							134
To view the Remind List
1
Press the MENU button.
Press the ▲or ▼button to select “Guide”, then 
press the ENTER button.
2
Press the ▲or ▼button to select “Remind List”, then
press the ENTER button.
To remove the scheduled programs
1
Press the ▲or ▼button to select a program to be
removed, then press the ENTER button.
To remove all programs, press the œor √button to 
select “Cancel All”, then press the ENTER button. 
2
Press the MENU button to exit.
Mini Guide√Full Guide√Remind List√Default Guide : Mini Guide√
GuideTV
MoveEnterReturn
Mini Guide√Full Guide√Remind List√Default Guide : Mini Guide√
GuideTV
MoveEnterReturn
Remind ListTV
EnterReturn
Cancel AllMON 1.17 1:56am-2:05am
11-1  MBC       MBC
MON 1.17 3:15am-3:28am
11-1  MBC        
MON 1.17 3:28am-3:29am
11-1  MBC        
Move
BN68-00835E-00Eng_(130~143)  5/30/05  5:30 PM  Page 134 
						

							PLASMA DISPLAY PANEL
Appendix
Troubleshooting..........................................................................136
Care and Maintenance ..............................................................137
Specifications ............................................................................138
Dimensions (HP-R4262) ..............................................................139
Dimensions (HP-R5012) ..............................................................141
BN68-00835E-00Eng_(130~143)  5/30/05  5:30 PM  Page 135 
						

							Troubleshooting
136
Problem
Poor picture.
No picture or sound.
Poor sound quality.
Your remote control does not
operate the TV.
The TV won’t turn on.
There is no screen image.
The image is too light or too dark. 
The image is too large or too small.
Digital broadcasting screen
problem.
Screen is black and power indicator
light blinks steadily.
The visual qualities of digital 
channels vary.
Although the TV caption shows HD,
the visual quality is not satisfactory.
If the TV seems to have a problem, first try this list of possible problems and solutions. 
If none of these troubleshooting tips apply, then call your nearest service center.
Possible Solution
Check all wire connections.
Try another channel. Press the SOURCE button.
Make sure the TV is plugged in. 
Check the antenna connections. 
Check that the Mute feature is Off.
Try another channel. Adjust the volume.
Press the “MODE” button to put your remote control in
the “TV” mode. 
Check the battery charge of the remote control.
Check if the power plug is connected. 
Check to see that both the TV and the source are
plugged in and turned on.
Adjust the Brightness or Contrast settings.
Adjust the Size settings.
Please check the digital signal strength and input
antenna.
On your computer check; Power, Signal Cable.
The TV is using its power management system.
Move the computer’s mouse or press any key on the
keyboard.
On your equipment check (STB, DVD, etc) ; Power,
Signal Cable.
The TV is using its power management system.
Press the Source button on the panel or remote control.
Turn the TV off and on.
The visual qualities of digital channels may vary
depending on the original production method (analog
or digital).       
➔ Classification by the information displayed when 
switching channels.
➔ If the original production method is digital: High 
visual quality program.
➔ If the original production method is analog: The 
digital program displayed on the screen is originally 
an analog program which has been converted. 
The visual quality is of an SD grade.
The HD caption that appears when switching channels
or when pressing the Information button on the remote
control means the selected channel is simply a digital
channel. If the broadcasting station converts an 
analog signal into digital and transmits the signal, 
the visual quality may not be perfect. 
(Applied to Set Top Box built-in model only.)
BN68-00835E-00Eng_(130~143)  6/10/05  5:00 PM  Page 136 
						

							137
With proper care, your TV will give you many years of service. 
Please follow these guidelines to get the maximum performance from your TV.
Identifying Problems
•Do not put the TV near extremely hot, cold, humid or dusty places.
•Do not put the TV near appliances that create magnetic fields.
•Keep the ventilation openings clear.
•Do not place the TV on a rough and slanted surface, such as cloth or paper.
Liquids
•Do not place liquids near or on the TV.
Cabinet
•Never open the cabinet or touch the parts inside.
•Wipe your TV with a clean, dry cloth. Never use water, cleaning fluids, wax, or chemicals.
•Do not put heavy objects on top of the cabinet.
Temperature
•If your TV is suddenly moved from a cold to a warm place, unplug the power cord for at least two
hours so that moisture that may have formed inside the unit can dry completely.
Care and Maintenance
BN68-00835E-00Eng_(130~143)  5/30/05  5:30 PM  Page 137 
						

							Specifications
138
Exterior design and product specifications are subject to change without prior notice to improve 
the performance of this product.
AC 110-120V~, 60Hz
ANT 1 - CABLE IN (Cable QAM)
ANT 2 - AIR IN (ATSC)
75Ωunbalanced
AV
S-VIDEO
COMPONENT1 - 480i/480p/720p/1080i
COMPONENT2 - 480i/480p/720p/1080i
PC
HDMI (DVI Compatible)
AV
S-VIDEO
COMPONENT1 - 480i/480p/720p/1080i
COMPONENT2 - 480i/480p/720p/1080i
PC
DVI
AUDIO (L/R)
OPTICAL (DIGITAL OUT)
COAXIAL (DIGITAL OUT)
15W + 15W (8Ω)
HP-R4262
41.7 (W) x 29.1 (H) x 3.88 (D) inches (Without Stand)
41.7 (W) x 30.7 (H) x 13.4 (D) inches (With Stand)
34.65 Kg / 76.39 lbs (Without Stand)
40 Kg / 88.2 lbs (With Stand)HP-R5012
48.54 (W) x 32.58 (H) x 3.88 (D) inches (Without Stand)
48.54
(W) x 34.53 (H) x 13.18 (D) inches (With Stand)
44.0 Kg / 97 lbs (Without Stand)
49.9 Kg / 110 lbs (With Stand)
380 W
1024 (H) x 768 (V)
42 inches420 W
1366 (H) x 768 (V)
50 inches Model
Dimensions Display
Weight Display
Voltage
Power Consumption
Number of Pixels
Screen Size
ANTENNA input
VIDEO input
AUDIO input
Sound Output 
Audio Output
Speaker Output
BN68-00835E-00Eng_(130~143)  6/10/05  7:21 PM  Page 138 
						

							139
Dimensions (HP-R4262)
JACK PANEL DETAIL 2 1/4H x 18 3/4W @ 5 3/4 UP FROM BOTTOM
BN68-00835E-00Eng_(130~143)  5/30/05  5:30 PM  Page 139 
						

							140
BN68-00835E-00Eng_(130~143)  5/30/05  5:30 PM  Page 140