Samsung Hp R5012 Plasma Display Owners Instructions
Have a look at the manual Samsung Hp R5012 Plasma Display Owners Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
41 Using the “-”Button The “-” button is used to select stations that broadcast both a digital and analog signal. For example, for Channel 7 -1 (digital), press “7”, then “-”, then “1”. For channel 7 -2 (analog), press “7”, then “-”, then “2”. Notes •HD indicates the TV is receiving a Digital High Definition signal. SD indicates the TV is receiving a Standard Definition signal. •For quick channel change, press the number buttons, then press the ENTER button. DTV Cable 7 - 1 KYW-HD HD DTV Cable 7 - 2 R SD Multi BN68-00835E-00Eng_(032~045) 5/30/05 5:14 PM Page 41
Setting Up Your Remote Control 42 Your TV comes equipped with a universal remote control. In addition to controlling the TV, the universal remote control can also operate a VCR, Cable box, DVD, and some Samsung Set-top boxes (even if your VCR, Cable box and DVD are made by manufacturers other than Samsung). Note : ●The remote control might not be compatible with all DVD Players, VCRs, Cable boxes, and Set-Top Boxes. Setting Up the Remote to Operate Your VCR, Cable box or DVD player 1 Turn off your VCR (or Cable box, DVD player). 2 Press the MODE button. The Mode is changed whenever MODE button is pressed. 3 Press the SET button on your TVs remote control. 4 Using the number buttons on your remote control, enter three digits of the VCR (or Cable box, DVD player) code listed on page 43 of this manual for your brand of VCR (or Cable box, DVD). Make sure you enter three digits of the code, even if the first digit is a “0”. (If more than one code is listed, try the first one.) 5 Press the POWER button on the remote control. Your VCR (or Cable box, DVD) should turn on if your remote is set up correctly. If your VCR (or Cable box, DVD) does not turn on after setup, repeat steps 2, 3, and 4, but try one of the other codes listed for your brand of VCR (or Cable box, DVD). If no other codes are listed, try each code, 000 through 089 (or Cable box: 000 through 077, DVD player: 000 through 008). Note •When your remote control is in “VCR”, “CABLE”, or “DVD” mode, the VCR control buttons (STOP, REW, PLAY/PAUSE, and FF) still operate your VCR. BN68-00835E-00Eng_(032~045) 5/31/05 11:15 AM Page 42
43 Remote Control Codes VCR Codes DVD Codes Cable Box Codes BN68-00835E-00Eng_(032~045) 5/30/05 5:14 PM Page 43
Viewing an External Signal Source Use the remote control to switch between viewing signals from connected equipment, such as VCR, DVD, Set-Top Box, and the TV source (broadcast or cable). 44 Setting the Signal Source 1 Press the MENU button. Press the ENTER button to select “Input”. 2 Press the ENTER button to select “Source List”. 3 Press the ▲or ▼button to select signal source, then press the ENTER button. 4 Press the MENU button to exit. Notes •When you connect equipment to the TV, you can choose between the following sets of jacks: AV, S-Video, Component 1, Component 2, PC, or HDMI on the TV’s rear panel. •Before selecting an input source, connect an external device first. •HDMI input can only be selected when the external device is turned on and connected via HDMI. ➤ ➤Quick way to access viewing an external signal source : Just press the “SOURCE” button on the remote control. Source List : TV√Edit Name√Anynet√ InputTV MoveEnterReturn TV AV : ----S-Video : ----Component 1 : ----Component 2 : ----PC : ----HDMI : ---- Source ListTV MoveEnterReturn TV AV : ----S-Video : ----Component 1 : ----Component 2 : ----PC : ----HDMI : ---- Source ListTV MoveEnterReturn BN68-00835E-00Eng_(032~045) 5/30/05 5:14 PM Page 44
45 Assigning Names to External input mode 1 Press the MENU button. Press the ENTER button to select “Input”. 2 Press the ▲or ▼button to select “Edit Name”, then press the ENTER button. 3 Press the ENTER button. Press the ▲or ▼button to select external device, then press the ENTER button. • You can select the VCR, DVD, D-VHS, Cable STB, HD STB, Satellite STB, PVR STB, AV Receiver, DVD Receiver, GAME, Camcorder, DVD Combo, PC, VOD STB, or TV. • Set other signal sources (S-Video, Component 1, Component 2, PC, or HDMI) using the same method as listed above. 4 Press the MENU button to exit. Source List : TV√Edit Name√Anynet√ InputTV MoveEnterReturn AV : ----√S-Video : ----√Component 1 : ----√Component 2 : ----√PC : ----√HDMI : ----√ Edit NameTV MoveEnterReturn AV :----S-Video : ----Component 1 : ----Component 2 : ----PC : HDMI : - Edit NameTV MoveEnterReturn † ----VCR DVD D-VHS Cable STB HD STB Satellite STB PVR STB BN68-00835E-00Eng_(032~045) 5/30/05 5:14 PM Page 45
BN68-00835E-00Eng_(046~063) 5/30/05 5:15 PM Page 46
PLASMA DISPLAY PANEL Picture Control Changing the Picture Standard ......................................................48 Customizing the Picture Settings ....................................................49 Viewing the DNIe Demonstration ..................................................51 Changing the Screen Size ............................................................52 Viewing the Picture-in-Picture..........................................................54 Selecting the Sound Source ..........................................................60 Setting the My Color Control Mode ................................................61 BN68-00835E-00Eng_(046~063) 5/30/05 5:15 PM Page 47
Changing the Picture Standard You can select the type of picture which best corresponds to your viewing requirements. 48 1 Press the MENU button. Press the ▲or ▼button to select “Picture”, then press the ENTER button. 2 Press the ENTER button again to select “Mode”. 3 Press the ENTER button. Press the ▲or ▼ button to select the desired picture mode (Dynamic, Standard, Movie, Custom), then press the ENTER button. 4 Press the MENU button to exit. •Choose Dynamic for viewing the TV during the day or when there is bright light in the room. •Choose Standard for the standard factory settings. •Choose Movie when viewing the movie. •Choose Custom if you want to adjust the settings according to personal preference (see “Customizing the Picture Settings”, page 49). Mode : Dynamic√Size : 16:9√Digital NR : On√DNIe Demo : Off√My Color Control√Film Mode : Off√ †More PictureTV MoveEnterReturn ModeTV MoveEnterReturn Mode : Dynamic√Contrast 100 Brightness 45 Sharpness 75 Color 55 Tint G 50 R 50 Color Tone : Cool2 √Reset Mode : Dynamic Contrast 100 Brightness 45 Sharpness 75 Color 55 Tint G 50 R 50 Color Tone : Cool2 Reset ModeTV MoveEnterReturn Dynamic Standard Movie Custom BN68-00835E-00Eng_(046~063) 5/30/05 5:15 PM Page 48
1 Press the MENU button. Press the ▲or ▼button to select “Picture”, then press the ENTER button. 2 Press the ENTER button to select “Mode”. 3 Press the ENTER button. Press the ▲or ▼ button to select the desired picture mode (Dynamic, Standard, Movie, Custom), then press the ENTER button. 4 Press the ▲or ▼button to select a particular option (Contrast, Brightness, Sharpness, Color, or Tint), then press the ENTER button. Press the œor √button to decrease or increase the value of a particular item. • You can also select these options (Contrast, Brightness, Sharpness, Color, or Tint) by pressing the ▲or ▼button. Notes •“Tint” doesn’t operate in HDMI or any Component modes. •The Tint cannot be adjusted while watching Digital TV. Customizing the Picture Settings You can use the on-screen menus to change the “Contrast”, “Brightness”, “Sharpness”, “Color”, “Tint”, and “Color Tone” according to personal preference. You can select “Standard” which automatically recalls your personalized picture settings. 49 ModeTV MoveEnterReturn Mode : Dynamic√Contrast 100 Brightness 45 Sharpness 75 Color 55 Tint G 50 R 50 Color Tone : Cool2 √Reset ModeTV MoveEnterReturn Mode : Custom√Contrast 80 Brightness 50 Sharpness 50 Color 50 Tint G 50 R 50 Color Tone : Normal √Reset Mode : Dynamic√Size : 16:9√Digital NR : On√DNIe Demo : Off√My Color Control√Film Mode : Off√ †More PictureTV MoveEnterReturn Mode : Dynamic Contrast 100 Brightness 45 Sharpness 75 Color 55 Tint G 50 R 50 Color Tone : Cool2 Reset ModeTV MoveEnterReturn Dynamic Standard Movie Custom ➤ ➤Quick way to access the picture setting: Just press the “P.MODE” button on the remote control. Contrast80 BN68-00835E-00Eng_(046~063) 5/30/05 5:15 PM Page 49
50 5 Press the ENTER button to return to “Mode”. Press the ▲or ▼button to select “Color Tone”, then press the ENTER button. 6 Press the ▲or ▼button to select a particular option (Cool2, Cool1, Normal, Warm1, or Warm2), then press the ENTER button. Press the MENU button to exit. Resetting the Picture Settings to the Factory Defaults 7 To return the factory defaults, select “Reset” by pressing the ▲or ▼button. Press the ENTER button. •The previously adjusted settings will be reset to the factory defaults. ModeTV MoveEnterReturn Mode : Custom√Contrast 80 Brightness 50 Sharpness 50 Color 50 Tint G 50 R 50 Color Tone : Normal √Reset ModeTV MoveEnterReturn Mode : Custom√Contrast 80 Brightness 50 Sharpness 50 Color 50 Tint G 50 R 50 Color Tone : Normal √Reset ModeTV MoveEnterReturn Mode : Custom Contrast 80 Brightness 50 Sharpness 50 Color 50 Tint G 50 R 50 Color Tone : Cool1 Reset Cool2 Cool1 Normal Warm1 Warm2 BN68-00835E-00Eng_(046~063) 5/30/05 5:15 PM Page 50