Samsung HP-R4252 Plasma Television User Manual
Have a look at the manual Samsung HP-R4252 Plasma Television User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
91 91 Setting up Your TV (Plug and Play) Our adoption of the new VESAPlug and Play solution eliminates complicated and time consuming setup. It allows you to install your monitor in a Plug and Play compatible system, without the usual setup hassles and confusion. Your PC system can easily identify and configure itself for use with your TV. This TV automatically tells the PC system its Extended Display Identification data (EDID) using Display Data Channel (DDC) protocols. BN68-00835A-00(088~097) 4/6/05 8:30 PM Page 91
92 How to Set up Your PC Software (Windows only) The Windows display-settings for a typical computer are shown below. But the actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. But even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.) 1.Right click the mouse on the Windows Desktop, then click on Properties. The Display Dialog-Box will be displayed. 2.Click on Settings, then set the Display Mode with reference to the Display Modes Table. You do not need to change the Colors settings. 3.Click on Advanced. A new settings dialog box will be displayed. 4.Click on the Monitor tab, then set the Screen Refresh Rate with reference to the Display Modes Table. Set the Vertical Frequency and Horizontal Frequency individually if you can do so instead of setting the Screen Refresh Rate. 5.Press the OK button, close the window, then press the OK button on the Display Registration Information window. Automatic re-booting may commence at this moment. 6.Shutdown the PC, and connect it to your TV. (See page 90) • The actual screens on your PC may look different, depending on your particular version of Windows and the type of your PC. • When you use your TV as a PC monitor, it supports Colors up to 32 bits. • In this case, the display on the TV may look different depending on your particular version of Windows or the PC manufacturer. • When connecting a PC (including the DVI connection), you must set it to the display settings that are supported by the TV. Otherwise, the message Out of input range will be displayed. Continued... 2 3 4 5 BN68-00835A-00(088~097) 4/6/05 8:30 PM Page 92
Note Both screen position and size will vary, depending on the type of PC monitor and its resolution. The table below shows all of the display modes that are supported: •The interlace mode is not supported. •The TV operates abnormally if a non-standard video format is selected. •The table above conforms to IBM/VESA regulations and is based on using the Analog Input. •A “ ✔” mark means that this mode can be supported. Notes •The PC text quality of HP-R4252 is optimum in XGA mode (1024 x 768@60Hz). •The PC text quality of HP-R5052 is optimum in WXGA mode (1360 x 768@60Hz). •When this TV is used as a PC display, 32-bit color is supported. •Depending on the manufacturer, your PC display screen might appear different. (and depending on your particular version of Windows.) Check your PC instruction book for information about connecting your PC to a TV. •If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 48.4KHz (horizontal). •In some cases, abnormal signals (such as stripes) might appear on the TV screen when the PC power is turned off (or if the PC is disconnected). If so, press the SOURCE button on the remote control or SOURCE button on the front panel to enter the VIDEO mode. Also, make sure that the PC is connected. •Connect only a PC monitor to the monitor output port while viewing the PC screen. (Otherwise, random signals might appear). 93 Video Signal IBM PC / AT CompatibleResolution (Dot X Line)Vertical Frequency (Hz) 640 X 350 720 X 400 640 X 480 800 X 600 1024 X 768 1280 X 720 1360 X 76870.086 70.087 59.940 70.000 72.809 75.000 56.250 60.317 70.000 72.188 75.000 60.004 70.069 72.000 75.029 59.855 60.015Horizontal Frequency (KHz) 31.469 31.469 31.469 35.000 37.861 37.500 35.156 37.879 43.750 48.077 46.875 48.363 56.476 57.672 60.023 44.772 47.712Vertical Polarity P N N N/P N N N/P P N/P P P N N N/P P P PHorizontal PolarityHP-R5052 HP-R4252 N P N N/P N N N/P P N/P P P N N N/P P N P ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ BN68-00835A-00(088~097) 4/6/05 8:30 PM Page 93
94 After connecting the TV to your PC, adjust the position of the screen if it is not well-aligned. Preset: • Press the SOURCE button to select “PC.” 1 Press the MENU button. Press the ▲or ▼button to select “Setup”, then press the ENTER button. 2 Press the ▲or ▼button to select “PC”, then press the ENTER button. 3 Press the ▲or ▼button to select “Position”, then press the ENTER button. 4 Adjust the position of screen by pressing the ▲/▼/œ/√button. 5 Press the MENU button to exit. Changing the Position of the Image Plug & Play√Language : English√Time√V-Chip√Caption√Menu Transparency : Medium√ †More SetupTV MoveEnterReturn Image Lock√Position√Auto Adjustment Image Reset PCTV MoveEnterReturn PositionTV MoveEnterReturn PositionTV MoveEnterReturn BN68-00835A-00(088~097) 4/6/05 8:30 PM Page 94
95 Plug & Play√Language : English√Time√V-Chip√Caption√Menu Transparency : Medium√ †More SetupTV MoveEnterReturn Picture Quality Adjustment Picture Automatic Adjustment Preset: •Press the SOURCE button to select “PC”. 1 Press the MENU button. Press the ▲or ▼button to select “Setup”, then press the ENTER button. 2 Press the ▲or ▼button to select “PC”, then press the ENTER button. 3 Press the ▲or ▼button to select “Auto Adjustment”, then press the ENTER button. The message “Auto Adjustment in progress. Please wait.” appears on the screen and the picture adjustments are automatically activated. Image Lock√Position√Auto Adjustment Image Reset PCTV MoveEnterReturn Auto Adjustment in progress. Please wait. BN68-00835A-00(088~097) 4/6/05 8:30 PM Page 95
Coarse Adjustment Preset: •Press the SOURCE button to select “PC”. 1 Press the MENU button. Press the ▲or ▼button to select “Setup”, then press the ENTER button. 2 Press the ▲or ▼button to select “PC”, then press the ENTER button. 3 Press the ENTER button to select “Image Lock”. 4 Press the ENTER button again to select “Coarse”. Remove picture noise (vertical stripes) on the screen by pressing the œ or√button. (If Coarse is not set properly, vertical stripes will appear on the screen.) • Press the ▲or ▼button to select another item. 5 Press the MENU button to exit. 96 Image Lock√Position√Auto Adjustment Image Reset PCTV MoveEnterReturn Coarse 50 Fine 0 Image LockTV MoveEnterReturn Coarse50 Plug & Play√Language : English√Time√V-Chip√Caption√Menu Transparency : Medium√ †More SetupTV MoveEnterReturn BN68-00835A-00(088~097) 4/6/05 8:30 PM Page 96
Fine Tuning (Fine) Preset: •Press the SOURCE button to select “PC”. 1 Press the MENU button. Press the ▲or ▼button to select “Setup”, then press the ENTER button. 2 Press the ▲or ▼button to select “PC”, then press the ENTER button. 3 Press the ENTER button to select “Image Lock”. 4 Press the ▲or ▼button to select “Fine”, then press the ENTER button. Remove picture noise on the screen by pressing the œ or√button. (If Fine is not set properly, noise will appear on the screen.) • Press the ▲or ▼button to select another item. 5 Press the MENU button to exit. 97 Image Lock√Position√Auto Adjustment Image Reset PCTV MoveEnterReturn Coarse 50 Fine 0 Image LockTV MoveEnterReturn Fine0 Plug & Play√Language : English√Time√V-Chip√Caption√Menu Transparency : Medium√ †More SetupTV MoveEnterReturn BN68-00835A-00(088~097) 4/6/05 8:30 PM Page 97
98 Image Reset Preset: •Press the SOURCE button to select “PC”. 1 Press the MENU button. Press the ▲or ▼button to select “Setup”, then press the ENTER button. 2 Press the ▲or ▼button to select “PC”, then press the ENTER button. 3 Press the ▲or ▼button to select “Image Reset”, then press the ENTER button. The message “Image Reset is completed.” appears on the screen. • The previously adjusted settings will be reset to the factory defaults. Image Lock√Position√Auto Adjustment Image Reset PCTV MoveEnterReturn Image Reset is completed. Plug & Play√Language : English√Time√V-Chip√Caption√Menu Transparency : Medium√ †More SetupTV MoveEnterReturn BN68-00835A-00(098~103) 4/6/05 8:31 PM Page 98
PLASMA DISPLAY PANEL Time Setting Setting the Clock .....................................................................100 Setting the On/Off Timer .........................................................102 Setting the Sleep Timer ............................................................103 BN68-00835A-00(098~103) 4/6/05 8:31 PM Page 99
Setting the Clock Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press the INFO button.) 100 Option 1: Setting the Clock Manually 1 Press the MENU button. Press the ▲or ▼button to select “Setup”, then press the ENTER button. 2 Press the ▲or ▼button to select “Time”, then press the ENTER button. Press the ENTER button to select “Clock”. 3 Press the ENTER button to select “Clock Mode”. Press the ▲or ▼button to select “Manual”, then press the ENTER button. 4 Press the ▲or ▼button to select “Clock Set”, then press the ENTER button. 5 Press the œor √button to move to “Month”, “Day”, “Year”, “Hour”, “Minute”, or “am/pm”. Set the clock you want by pressing the ▲or ▼button, then press the ENTER button. 6 Press the MENU button to exit. Notes •The current time will appear every time you press the INFO button. •You can set the Month, Day, Year, Hour and Minute directly by pressing the number buttons on the remote control. --/--/----/--:-- -- Clock√Sleep Timer : Off√On Timer : Off√Off Timer : Off√ TimeTV MoveEnterReturn Clock Mode : Manual√Clock Set√Time Zone√DST : No√ ClockTV MoveEnterReturn Set current date and time. Clock SetTV MoveAdjustReturn Month Day Year Hour Minute am/pm… †---- ---- -- -- -- Plug & Play√Language : English√Time√V-Chip√Caption√Menu Transparency : Medium√ †More SetupTV MoveEnterReturn BN68-00835A-00(098~103) 4/6/05 8:31 PM Page 100